| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1539889562-21458-2-git-send-email-yuiko.oshino@microchip.com>
Date: Thu, 18 Oct 2018 15:06:01 -0400
From: Yuiko Oshino <yuiko.oshino@...rochip.com>
To: <davem@...emloft.net>, <robh+dt@...nel.org>,
<devicetree@...r.kernel.org>, <f.fainelli@...il.com>,
<andrew@...n.ch>
CC: <linux-kernel@...r.kernel.org>, <mark.rutland@....com>,
<m.felsch@...gutronix.de>, <Markus.Niebel@....de>,
<netdev@...r.kernel.org>, <UNGLinuxDriver@...rochip.com>
Subject: [PATCH v3 net-next 1/2] net: phy: micrel: add Microchip KSZ9131 initial driver
Add support for Microchip Technology KSZ9131 10/100/1000 Ethernet PHY
Signed-off-by: Yuiko Oshino <yuiko.oshino@...rochip.com>
---
drivers/net/phy/micrel.c | 130 ++++++++++++++++++++++++++++++++++++++++++++-
include/linux/micrel_phy.h | 1 +
2 files changed, 130 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 3db06b4..270ea16 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -14,7 +14,7 @@
* option) any later version.
*
* Support : Micrel Phys:
- * Giga phys: ksz9021, ksz9031
+ * Giga phys: ksz9021, ksz9031, ksz9131
* 100/10 Phys : ksz8001, ksz8721, ksz8737, ksz8041
* ksz8021, ksz8031, ksz8051,
* ksz8081, ksz8091,
@@ -609,6 +609,116 @@ static int ksz9031_config_init(struct phy_device *phydev)
return result;
}
+#define KSZ9131_SKEW_5BIT_MAX 2400
+#define KSZ9131_SKEW_4BIT_MAX 800
+#define KSZ9131_OFFSET 700
+#define KSZ9131_STEP 100
+
+static int ksz9131_of_load_skew_values(struct phy_device *phydev,
+ struct device_node *of_node,
+ u16 reg, size_t field_sz,
+ char *field[], u8 numfields)
+{
+ int val[4] = {-(1 + KSZ9131_OFFSET), -(2 + KSZ9131_OFFSET),
+ -(3 + KSZ9131_OFFSET), -(4 + KSZ9131_OFFSET)};
+ int skewval, skewmax = 0;
+ int matches = 0;
+ u16 maxval;
+ u16 newval;
+ u16 mask;
+ int i;
+
+ /* psec properties in dts should mean x pico seconds */
+ if (field_sz == 5)
+ skewmax = KSZ9131_SKEW_5BIT_MAX;
+ else
+ skewmax = KSZ9131_SKEW_4BIT_MAX;
+
+ for (i = 0; i < numfields; i++)
+ if (!of_property_read_s32(of_node, field[i], &skewval)) {
+ if (skewval < -KSZ9131_OFFSET)
+ skewval = -KSZ9131_OFFSET;
+ else if (skewval > skewmax)
+ skewval = skewmax;
+
+ val[i] = skewval + KSZ9131_OFFSET;
+ matches++;
+ }
+
+ if (!matches)
+ return 0;
+
+ if (matches < numfields)
+ newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg);
+ else
+ newval = 0;
+
+ maxval = (field_sz == 4) ? 0xf : 0x1f;
+ for (i = 0; i < numfields; i++)
+ if (val[i] != -(i + 1 + KSZ9131_OFFSET)) {
+ mask = 0xffff;
+ mask ^= maxval << (field_sz * i);
+ newval = (newval & mask) |
+ (((val[i] / KSZ9131_STEP) & maxval)
+ << (field_sz * i));
+ }
+
+ return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval);
+}
+
+static int ksz9131_config_init(struct phy_device *phydev)
+{
+ const struct device *dev = &phydev->mdio.dev;
+ struct device_node *of_node = dev->of_node;
+ char *clk_skews[2] = {"rxc-skew-psec", "txc-skew-psec"};
+ char *rx_data_skews[4] = {
+ "rxd0-skew-psec", "rxd1-skew-psec",
+ "rxd2-skew-psec", "rxd3-skew-psec"
+ };
+ char *tx_data_skews[4] = {
+ "txd0-skew-psec", "txd1-skew-psec",
+ "txd2-skew-psec", "txd3-skew-psec"
+ };
+ char *control_skews[2] = {"txen-skew-psec", "rxdv-skew-psec"};
+ const struct device *dev_walker;
+ int ret;
+
+ dev_walker = &phydev->mdio.dev;
+ do {
+ of_node = dev_walker->of_node;
+ dev_walker = dev_walker->parent;
+ } while (!of_node && dev_walker);
+
+ if (!of_node)
+ return 0;
+
+ ret = ksz9131_of_load_skew_values(phydev, of_node,
+ MII_KSZ9031RN_CLK_PAD_SKEW, 5,
+ clk_skews, 2);
+ if (ret < 0)
+ return ret;
+
+ ret = ksz9131_of_load_skew_values(phydev, of_node,
+ MII_KSZ9031RN_CONTROL_PAD_SKEW, 4,
+ control_skews, 2);
+ if (ret < 0)
+ return ret;
+
+ ret = ksz9131_of_load_skew_values(phydev, of_node,
+ MII_KSZ9031RN_RX_DATA_PAD_SKEW, 4,
+ rx_data_skews, 4);
+ if (ret < 0)
+ return ret;
+
+ ret = ksz9131_of_load_skew_values(phydev, of_node,
+ MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4,
+ tx_data_skews, 4);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
#define KSZ8873MLL_GLOBAL_CONTROL_4 0x06
#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX BIT(6)
#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED BIT(4)
@@ -975,6 +1085,23 @@ static struct phy_driver ksphy_driver[] = {
.suspend = genphy_suspend,
.resume = kszphy_resume,
}, {
+ .phy_id = PHY_ID_KSZ9131,
+ .phy_id_mask = MICREL_PHY_ID_MASK,
+ .name = "Microchip KSZ9131 Gigabit PHY",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .driver_data = &ksz9021_type,
+ .probe = kszphy_probe,
+ .config_init = ksz9131_config_init,
+ .read_status = ksz9031_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .get_sset_count = kszphy_get_sset_count,
+ .get_strings = kszphy_get_strings,
+ .get_stats = kszphy_get_stats,
+ .suspend = genphy_suspend,
+ .resume = kszphy_resume,
+}, {
.phy_id = PHY_ID_KSZ8873MLL,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Micrel KSZ8873MLL Switch",
@@ -1022,6 +1149,7 @@ MODULE_LICENSE("GPL");
static struct mdio_device_id __maybe_unused micrel_tbl[] = {
{ PHY_ID_KSZ9021, 0x000ffffe },
{ PHY_ID_KSZ9031, MICREL_PHY_ID_MASK },
+ { PHY_ID_KSZ9131, MICREL_PHY_ID_MASK },
{ PHY_ID_KSZ8001, 0x00fffffc },
{ PHY_ID_KS8737, MICREL_PHY_ID_MASK },
{ PHY_ID_KSZ8021, 0x00ffffff },
diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h
index 472fa4d..7361cd3 100644
--- a/include/linux/micrel_phy.h
+++ b/include/linux/micrel_phy.h
@@ -31,6 +31,7 @@
#define PHY_ID_KSZ8081 0x00221560
#define PHY_ID_KSZ8061 0x00221570
#define PHY_ID_KSZ9031 0x00221620
+#define PHY_ID_KSZ9131 0x00221640
#define PHY_ID_KSZ886X 0x00221430
#define PHY_ID_KSZ8863 0x00221435
--
2.7.4
Powered by blists - more mailing lists