linux-kernel - [PATCH v2] USB: Wait for extra delay time after USB_PORT_FEAT

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181019081450.21230-1-kai.heng.feng@canonical.com>
Date:   Fri, 19 Oct 2018 16:14:50 +0800
From:   Kai-Heng Feng <kai.heng.feng@...onical.com>
To:     gregkh@...uxfoundation.org
Cc:     stern@...land.harvard.edu, linux-usb@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Kai-Heng Feng <kai.heng.feng@...onical.com>
Subject: [PATCH v2] USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub

Devices connected under Terminus Technology Inc. Hub (1a40:0101) may
fail to work after the system resumes from suspend:
[  206.063325] usb 3-2.4: reset full-speed USB device number 4 using xhci_hcd
[  206.143691] usb 3-2.4: device descriptor read/64, error -32
[  206.351671] usb 3-2.4: device descriptor read/64, error -32

Info for this hub:
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=480 MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1a40 ProdID=0101 Rev=01.11
S:  Product=USB 2.0 Hub
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

Some expirements indicate that the USB devices connected to the hub are
innocent, it's the hub itself is to blame. The hub needs extra delay
time after it resets its port.

Hence wait for extra delay, if the device is connected to this quirky
hub.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
---
v2:
  - Use hub->hdev to check quirk.
  - Merge the delay with TRSTRCY.

 Documentation/admin-guide/kernel-parameters.txt |  2 ++
 drivers/usb/core/hub.c                          | 14 +++++++++++---
 drivers/usb/core/quirks.c                       |  6 ++++++
 include/linux/usb/quirks.h                      |  3 +++
 4 files changed, 22 insertions(+), 3 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 92eb1f42240d..626bb7892ab3 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4683,6 +4683,8 @@
 					prevent spurious wakeup);
 				n = USB_QUIRK_DELAY_CTRL_MSG (Device needs a
 					pause after every control message);
+				o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra
+					delay after resetting its port);
 			Example: quirks=0781:5580:bk,0a5c:5834:gij
 
 	usbhid.mousepoll=
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 462ce49f683a..6e0823790bee 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2791,6 +2791,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 	int i, status;
 	u16 portchange, portstatus;
 	struct usb_port *port_dev = hub->ports[port1 - 1];
+	int reset_recovery_time;
 
 	if (!hub_is_superspeed(hub->hdev)) {
 		if (warm) {
@@ -2882,11 +2883,18 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 
 done:
 	if (status == 0) {
-		/* TRSTRCY = 10 ms; plus some extra */
 		if (port_dev->quirks & USB_PORT_QUIRK_FAST_ENUM)
 			usleep_range(10000, 12000);
-		else
-			msleep(10 + 40);
+		else {
+			/* TRSTRCY = 10 ms; plus some extra */
+			reset_recovery_time = 10 + 40;
+
+			/* Hub needs extra delay after resetting its port. */
+			if (hub->hdev->quirks & USB_QUIRK_HUB_SLOW_RESET)
+				reset_recovery_time += 100;
+
+			msleep(reset_recovery_time);
+		}
 
 		if (udev) {
 			struct usb_hcd *hcd = bus_to_hcd(udev->bus);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 178d6c6063c0..4d7d948eae63 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -128,6 +128,9 @@ static int quirks_param_set(const char *val, const struct kernel_param *kp)
 			case 'n':
 				flags |= USB_QUIRK_DELAY_CTRL_MSG;
 				break;
+			case 'o':
+				flags |= USB_QUIRK_HUB_SLOW_RESET;
+				break;
 			/* Ignore unrecognized flag characters */
 			}
 		}
@@ -380,6 +383,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x1a0a, 0x0200), .driver_info =
 			USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
 
+	/* Terminus Technology Inc. Hub */
+	{ USB_DEVICE(0x1a40, 0x0101), .driver_info = USB_QUIRK_HUB_SLOW_RESET },
+
 	/* Corsair K70 RGB */
 	{ USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT },
 
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index b7a99ce56bc9..a1be64c9940f 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -66,4 +66,7 @@
 /* Device needs a pause after every control message. */
 #define USB_QUIRK_DELAY_CTRL_MSG		BIT(13)
 
+/* Hub needs extra delay after resetting its port. */
+#define USB_QUIRK_HUB_SLOW_RESET		BIT(14)
+
 #endif /* __LINUX_USB_QUIRKS_H */
-- 
2.17.1