| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20181019120952.32763-7-hch@lst.de>
Date: Fri, 19 Oct 2018 14:09:49 +0200
From: Christoph Hellwig <hch@....de>
To: Masahiro Yamada <yamada.masahiro@...ionext.com>
Cc: Matt Porter <mporter@...nel.crashing.org>,
Alexandre Bounine <alex.bou9@...il.com>,
Dominik Brodowski <linux@...inikbrodowski.net>,
linux-kbuild@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-pci@...r.kernel.org, linux-scsi@...r.kernel.org,
linux-arch@...r.kernel.org, linux-kernel@...r.kernel.org,
linuxppc-dev@...ts.ozlabs.org
Subject: [PATCH 6/9] PCI: consolidate PCI config entry in drivers/pci
There is no good reason to duplicate the PCI menu in every architecture.
Instead provide a selectable HAVE_PCI symbol that indicates availability
of PCI support and the handle the rest in drivers/pci.
Note that for powerpc we now select HAVE_PCI globally instead of the
convoluted mess of conditional or or non-conditional support per board,
similar to what we do e.g. on x86. For alpha PCI is selected for the
non-jensen configs as it was the default before, and a lot of code does
not compile without PCI enabled. On other architectures with limited
PCI support that wasn't as complicated I've left the selection as-is.
Signed-off-by: Christoph Hellwig <hch@....de>
Acked-by: Max Filippov <jcmvbkbc@...il.com>
Acked-by: Thomas Gleixner <tglx@...utronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@...gle.com>
---
arch/alpha/Kconfig | 15 ++-------
arch/arc/Kconfig | 20 ------------
arch/arc/plat-axs10x/Kconfig | 2 +-
arch/arc/plat-hsdk/Kconfig | 2 +-
arch/arm/Kconfig | 19 ++----------
arch/arm/mach-ks8695/Kconfig | 10 +++---
arch/arm/mach-pxa/Kconfig | 2 +-
arch/arm64/Kconfig | 10 +-----
arch/hexagon/Kconfig | 3 --
arch/ia64/Kconfig | 9 +-----
arch/m68k/Kconfig.bus | 11 -------
arch/m68k/Kconfig.cpu | 1 +
arch/microblaze/Kconfig | 6 +---
arch/mips/Kconfig | 43 +++++++++-----------------
arch/mips/alchemy/Kconfig | 6 ++--
arch/mips/ath25/Kconfig | 2 +-
arch/mips/ath79/Kconfig | 8 ++---
arch/mips/bcm63xx/Kconfig | 14 ++++-----
arch/mips/lantiq/Kconfig | 2 +-
arch/mips/loongson64/Kconfig | 6 ++--
arch/mips/pmcs-msp71xx/Kconfig | 10 +++---
arch/mips/ralink/Kconfig | 8 ++---
arch/mips/sibyte/Kconfig | 10 +++---
arch/mips/txx9/Kconfig | 8 ++---
arch/mips/vr41xx/Kconfig | 8 ++---
arch/parisc/Kconfig | 1 +
arch/powerpc/Kconfig | 25 ++++-----------
arch/powerpc/platforms/44x/Kconfig | 1 -
arch/powerpc/platforms/512x/Kconfig | 1 -
arch/powerpc/platforms/52xx/Kconfig | 1 -
arch/powerpc/platforms/83xx/Kconfig | 1 -
arch/powerpc/platforms/85xx/Kconfig | 1 -
arch/powerpc/platforms/86xx/Kconfig | 2 --
arch/powerpc/platforms/Kconfig | 1 -
arch/powerpc/platforms/Kconfig.cputype | 2 --
arch/powerpc/platforms/ps3/Kconfig | 1 -
arch/riscv/Kconfig | 18 ++---------
arch/s390/Kconfig | 23 +++++---------
arch/sh/Kconfig | 19 ++----------
arch/sh/boards/Kconfig | 30 +++++++++---------
arch/sparc/Kconfig | 15 +--------
arch/um/Kconfig | 3 --
arch/unicore32/Kconfig | 11 +------
arch/x86/Kconfig | 12 +------
arch/x86/configs/i386_defconfig | 1 +
arch/x86/configs/x86_64_defconfig | 1 +
arch/xtensa/Kconfig | 16 +---------
arch/xtensa/configs/common_defconfig | 1 +
arch/xtensa/configs/iss_defconfig | 1 -
drivers/Kconfig | 4 +++
drivers/parisc/Kconfig | 11 -------
drivers/pci/Kconfig | 12 +++++++
drivers/pci/endpoint/Kconfig | 2 +-
53 files changed, 133 insertions(+), 319 deletions(-)
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 5b4f88363453..bb89924c0361 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -6,6 +6,8 @@ config ALPHA
select ARCH_MIGHT_HAVE_PC_SERIO
select ARCH_NO_PREEMPT
select ARCH_USE_CMPXCHG_LOCKREF
+ select HAVE_PCI if !ALPHA_JENSEN
+ select PCI if !ALPHA_JENSEN
select HAVE_AOUT
select HAVE_IDE
select HAVE_OPROFILE
@@ -15,6 +17,7 @@ config ALPHA
select NEED_SG_DMA_LENGTH
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
+ select GENERIC_PCI_IOMAP if PCI
select AUTO_IRQ_AFFINITY if SMP
select GENERIC_IRQ_SHOW
select ARCH_WANT_IPC_PARSE_VERSION
@@ -319,17 +322,6 @@ config ISA_DMA_API
bool
default y
-config PCI
- bool
- depends on !ALPHA_JENSEN
- select GENERIC_PCI_IOMAP
- default y
- help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
- VESA. If you have PCI, say Y, otherwise N.
-
config PCI_DOMAINS
bool
default y
@@ -681,7 +673,6 @@ config HZ
default 1200 if HZ_1200
default 1024
-source "drivers/pci/Kconfig"
source "drivers/eisa/Kconfig"
source "drivers/pcmcia/Kconfig"
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index a045f3086047..55a6953e9239 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -53,9 +53,6 @@ config ARC
config ARCH_HAS_CACHE_LINE_SIZE
def_bool y
-config MIGHT_HAVE_PCI
- bool
-
config TRACE_IRQFLAGS_SUPPORT
def_bool y
@@ -555,24 +552,7 @@ config FORCE_MAX_ZONEORDER
default "12" if ARC_HUGEPAGE_16M
default "11"
-menu "Bus Support"
-
-config PCI
- bool "PCI support" if MIGHT_HAVE_PCI
- help
- PCI is the name of a bus system, i.e., the way the CPU talks to
- the other stuff inside your box. Find out if your board/platform
- has PCI.
-
- Note: PCIe support for Synopsys Device will be available only
- when HAPS DX is configured with PCIe RC bitmap. If you have PCI,
- say Y, otherwise N.
-
config PCI_SYSCALL
def_bool PCI
-source "drivers/pci/Kconfig"
-
-endmenu
-
source "kernel/power/Kconfig"
diff --git a/arch/arc/plat-axs10x/Kconfig b/arch/arc/plat-axs10x/Kconfig
index 4e0df7b7a248..27b9eb97a6bf 100644
--- a/arch/arc/plat-axs10x/Kconfig
+++ b/arch/arc/plat-axs10x/Kconfig
@@ -11,7 +11,7 @@ menuconfig ARC_PLAT_AXS10X
select DW_APB_ICTL
select GPIO_DWAPB
select OF_GPIO
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
select GENERIC_IRQ_CHIP
select GPIOLIB
select AXS101 if ISA_ARCOMPACT
diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig
index 9356753c2ed8..f25c085b9874 100644
--- a/arch/arc/plat-hsdk/Kconfig
+++ b/arch/arc/plat-hsdk/Kconfig
@@ -11,4 +11,4 @@ menuconfig ARC_SOC_HSDK
select ARC_HAS_ACCL_REGS
select CLK_HSDK
select RESET_HSDK
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e33735ce1c14..7495d0a0aa31 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -149,9 +149,6 @@ config ARM_DMA_IOMMU_ALIGNMENT
endif
-config MIGHT_HAVE_PCI
- bool
-
config SYS_SUPPORTS_APM_EMULATION
bool
@@ -320,7 +317,7 @@ config ARCH_MULTIPLATFORM
select COMMON_CLK
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
select PCI_DOMAINS if PCI
select SPARSE_IRQ
select USE_OF
@@ -436,7 +433,7 @@ config ARCH_IXP4XX
select DMABOUNCE if PCI
select GENERIC_CLOCKEVENTS
select GPIOLIB
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
select NEED_MACH_IO_H
select USB_EHCI_BIG_ENDIAN_DESC
select USB_EHCI_BIG_ENDIAN_MMIO
@@ -449,7 +446,7 @@ config ARCH_DOVE
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select GPIOLIB
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
select MVEBU_MBUS
select PINCTRL
select PINCTRL_DOVE
@@ -1216,14 +1213,6 @@ config ISA_DMA
config ISA_DMA_API
bool
-config PCI
- bool "PCI support" if MIGHT_HAVE_PCI
- help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
- VESA. If you have PCI, say Y, otherwise N.
-
config PCI_DOMAINS
bool "Support for multiple PCI domains"
depends on PCI
@@ -1252,8 +1241,6 @@ config PCI_HOST_ITE8152
default y
select DMABOUNCE
-source "drivers/pci/Kconfig"
-
source "drivers/pcmcia/Kconfig"
endmenu
diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig
index a545976bdbd6..b3185c05fffa 100644
--- a/arch/arm/mach-ks8695/Kconfig
+++ b/arch/arm/mach-ks8695/Kconfig
@@ -4,7 +4,7 @@ menu "Kendin/Micrel KS8695 Implementations"
config MACH_KS8695
bool "KS8695 development board"
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
help
Say 'Y' here if you want your kernel to run on the original
Kendin-Micrel KS8695 development board.
@@ -52,7 +52,7 @@ config MACH_CM4002
config MACH_CM4008
bool "OpenGear CM4008"
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
help
Say 'Y' here if you want your kernel to support the OpenGear
CM4008 Console Server. See http://www.opengear.com for more
@@ -60,7 +60,7 @@ config MACH_CM4008
config MACH_CM41xx
bool "OpenGear CM41xx"
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
help
Say 'Y' here if you want your kernel to support the OpenGear
CM4016 or CM4048 Console Servers. See http://www.opengear.com for
@@ -68,7 +68,7 @@ config MACH_CM41xx
config MACH_IM4004
bool "OpenGear IM4004"
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
help
Say 'Y' here if you want your kernel to support the OpenGear
IM4004 Secure Access Server. See http://www.opengear.com for
@@ -76,7 +76,7 @@ config MACH_IM4004
config MACH_IM42xx
bool "OpenGear IM42xx"
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
help
Say 'Y' here if you want your kernel to support the OpenGear
IM4216 or IM4248 Console Servers. See http://www.opengear.com for
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index a68b34183107..b185794549be 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -125,7 +125,7 @@ config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
select IWMMXT
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
select NEED_MACH_IO_H if PCI
select PXA25x
select PXA27x
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 1b1a0e95c751..ae0f1ef0a748 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -98,6 +98,7 @@ config ARM64
select GENERIC_TIME_VSYSCALL
select HANDLE_DOMAIN_IRQ
select HARDIRQS_SW_RESEND
+ select HAVE_PCI
select HAVE_ACPI_APEI if (ACPI && EFI)
select HAVE_ALIGNED_STRUCT_PAGE if SLUB
select HAVE_ARCH_AUDITSYSCALL
@@ -284,13 +285,6 @@ source "arch/arm64/Kconfig.platforms"
menu "Bus support"
-config PCI
- bool "PCI support"
- help
- This feature enables support for PCI bus system. If you say Y
- here, the kernel will include drivers and infrastructure code
- to support PCI bus devices.
-
config PCI_DOMAINS
def_bool PCI
@@ -300,8 +294,6 @@ config PCI_DOMAINS_GENERIC
config PCI_SYSCALL
def_bool PCI
-source "drivers/pci/Kconfig"
-
endmenu
menu "Kernel Features"
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index 89a4b22f34d9..1bc856c61ed8 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -44,9 +44,6 @@ config FRAME_POINTER
config LOCKDEP_SUPPORT
def_bool y
-config PCI
- def_bool n
-
config EARLY_PRINTK
def_bool y
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 8b4a0c1748c0..89da763d7c17 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -51,6 +51,7 @@ config IA64
select MODULES_USE_ELF_RELA
select ARCH_USE_CMPXCHG_LOCKREF
select HAVE_ARCH_AUDITSYSCALL
+ select HAVE_PCI if !IA64_HP_SIM
select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
default y
@@ -546,20 +547,12 @@ if !IA64_HP_SIM
menu "Bus options (PCI, PCMCIA)"
-config PCI
- bool "PCI support"
- help
- Real IA-64 machines all have PCI/PCI-X/PCI Express busses. Say Y
- here unless you are using a simulator without PCI support.
-
config PCI_DOMAINS
def_bool PCI
config PCI_SYSCALL
def_bool PCI
-source "drivers/pci/Kconfig"
-
source "drivers/pcmcia/Kconfig"
endmenu
diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus
index aef698fa50e5..8cb0604b195b 100644
--- a/arch/m68k/Kconfig.bus
+++ b/arch/m68k/Kconfig.bus
@@ -63,17 +63,6 @@ source "drivers/zorro/Kconfig"
endif
-config PCI
- bool "PCI support"
- depends on M54xx
- help
- Enable the PCI bus. Support for the PCI bus hardware built into the
- ColdFire 547x and 548x processors.
-
-if PCI
-source "drivers/pci/Kconfig"
-endif
-
if !MMU
config ISA_DMA_API
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 21f00349af52..60ac1cd8b96f 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -299,6 +299,7 @@ config M53xx
bool
config M54xx
+ select HAVE_PCI
bool
endif # COLDFIRE
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index ace5c5bf1836..3d352862db30 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -32,6 +32,7 @@ config MICROBLAZE
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_OPROFILE
+ select HAVE_PCI
select IRQ_DOMAIN
select XILINX_INTC
select MODULES_USE_ELF_RELA
@@ -268,9 +269,6 @@ endmenu
menu "Bus Options"
-config PCI
- bool "PCI support"
-
config PCI_DOMAINS
def_bool PCI
@@ -284,6 +282,4 @@ config PCI_XILINX
bool "Xilinx PCI host bridge support"
depends on PCI
-source "drivers/pci/Kconfig"
-
endmenu
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 35511999156a..09b93d5a55cb 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -74,6 +74,7 @@ config MIPS
select IRQ_FORCED_THREADING
select MODULES_USE_ELF_RELA if MODULES && 64BIT
select MODULES_USE_ELF_REL if MODULES
+ select PCI_DOMAINS if PCI
select PERF_USE_VMALLOC
select RTC_LIB if !MACH_LOONGSON64
select SYSCTL_EXCEPTION_TRACE
@@ -96,7 +97,7 @@ config MIPS_GENERIC
select CPU_MIPSR2_IRQ_EI
select CSRC_R4K
select DMA_PERDEV_COHERENT
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select LIBFDT
select MIPS_AUTO_PFN_OFFSET
@@ -256,7 +257,7 @@ config BCM47XX
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select SYS_HAS_CPU_MIPS32_R1
select NO_EXCEPT_FILL
@@ -299,7 +300,7 @@ config MIPS_COBALT
select CSRC_R4K
select CEVT_GT641XX
select DMA_NONCOHERENT
- select HW_HAS_PCI
+ select HAVE_PCI
select I8253
select I8259
select IRQ_MIPS_CPU
@@ -422,7 +423,7 @@ config LASAT
select CSRC_R4K
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select PCI_GT64XXX_PCI0
select MIPS_NILE4
@@ -502,7 +503,7 @@ config MIPS_MALTA
select HAVE_PCSPKR_PLATFORM
select IRQ_MIPS_CPU
select MIPS_GIC
- select HW_HAS_PCI
+ select HAVE_PCI
select I8253
select I8259
select MIPS_BONITO64
@@ -556,7 +557,7 @@ config MACH_PIC32
config NEC_MARKEINS
bool "NEC EMMA2RH Mark-eins board"
select SOC_EMMA2RH
- select HW_HAS_PCI
+ select HAVE_PCI
help
This enables support for the NEC Electronics Mark-eins boards.
@@ -673,7 +674,7 @@ config SGI_IP27
select BOOT_ELF64
select DEFAULT_SGI_PARTITION
select SYS_HAS_EARLY_PRINTK
- select HW_HAS_PCI
+ select HAVE_PCI
select NR_CPUS_DEFAULT_64
select SYS_HAS_CPU_R10000
select SYS_SUPPORTS_64BIT_KERNEL
@@ -733,7 +734,7 @@ config SGI_IP32
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select R5000_CPU_SCACHE
select RM7000_CPU_SCACHE
@@ -843,7 +844,7 @@ config SNI_RM
select GENERIC_ISA_DMA
select HAVE_PCSPKR_PLATFORM
select HW_HAS_EISA
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select I8253
select I8259
@@ -876,7 +877,7 @@ config MIKROTIK_RB532
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
@@ -903,7 +904,7 @@ config CAVIUM_OCTEON_SOC
select SYS_SUPPORTS_HOTPLUG_CPU if CPU_BIG_ENDIAN
select SYS_HAS_EARLY_PRINTK
select SYS_HAS_CPU_CAVIUM_OCTEON
- select HW_HAS_PCI
+ select HAVE_PCI
select ZONE_DMA32
select HOLES_IN_ZONE
select GPIOLIB
@@ -936,7 +937,7 @@ config NLM_XLR_BOARD
select NLM_COMMON
select SYS_HAS_CPU_XLR
select SYS_SUPPORTS_SMP
- select HW_HAS_PCI
+ select HAVE_PCI
select SWAP_IO_SPACE
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
@@ -962,7 +963,7 @@ config NLM_XLP_BOARD
select NLM_COMMON
select SYS_HAS_CPU_XLP
select SYS_SUPPORTS_SMP
- select HW_HAS_PCI
+ select HAVE_PCI
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select PHYS_ADDR_T_64BIT
@@ -997,7 +998,7 @@ config MIPS_PARAVIRT
select SYS_HAS_CPU_MIPS32_R2
select SYS_HAS_CPU_MIPS64_R2
select SYS_HAS_CPU_CAVIUM_OCTEON
- select HW_HAS_PCI
+ select HAVE_PCI
select SWAP_IO_SPACE
help
This option supports guest running under ????
@@ -2992,18 +2993,6 @@ menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
config HW_HAS_EISA
bool
-config HW_HAS_PCI
- bool
-
-config PCI
- bool "Support for PCI controller"
- depends on HW_HAS_PCI
- select PCI_DOMAINS
- help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
- say Y, otherwise N.
config HT_PCI
bool "Support for HT-linked PCI"
@@ -3030,8 +3019,6 @@ config PCI_DRIVERS_LEGACY
def_bool !PCI_DRIVERS_GENERIC
select NO_GENERIC_PCI_IOPORT_MAP
-source "drivers/pci/Kconfig"
-
#
# ISA support is now enabled via select. Too many systems still have the one
# or other ISA chip on the board that users don't know about so don't expect
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index 7d73f7f4202b..83b288b95b16 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -14,7 +14,7 @@ choice
config MIPS_MTX1
bool "4G Systems MTX-1 board"
- select HW_HAS_PCI
+ select HAVE_PCI
select ALCHEMY_GPIOINT_AU1000
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
@@ -22,7 +22,7 @@ config MIPS_MTX1
config MIPS_DB1XXX
bool "Alchemy DB1XXX / PB1XXX boards"
select GPIOLIB
- select HW_HAS_PCI
+ select HAVE_PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
help
@@ -40,7 +40,7 @@ config MIPS_XXS1500
config MIPS_GPR
bool "Trapeze ITS GPR board"
select ALCHEMY_GPIOINT_AU1000
- select HW_HAS_PCI
+ select HAVE_PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
diff --git a/arch/mips/ath25/Kconfig b/arch/mips/ath25/Kconfig
index 2c1dfd06c366..4c1b4579c814 100644
--- a/arch/mips/ath25/Kconfig
+++ b/arch/mips/ath25/Kconfig
@@ -13,6 +13,6 @@ config PCI_AR2315
bool "Atheros AR2315 PCI controller support"
depends on SOC_AR2315
select ARCH_HAS_PHYS_TO_DMA
- select HW_HAS_PCI
+ select HAVE_PCI
select PCI
default y
diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
index 9547cf1ea38d..191c3910eac5 100644
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -75,11 +75,11 @@ config ATH79_MACH_UBNT_XM
endmenu
config SOC_AR71XX
- select HW_HAS_PCI
+ select HAVE_PCI
def_bool n
config SOC_AR724X
- select HW_HAS_PCI
+ select HAVE_PCI
select PCI_AR724X if PCI
def_bool n
@@ -90,12 +90,12 @@ config SOC_AR933X
def_bool n
config SOC_AR934X
- select HW_HAS_PCI
+ select HAVE_PCI
select PCI_AR724X if PCI
def_bool n
config SOC_QCA955X
- select HW_HAS_PCI
+ select HAVE_PCI
select PCI_AR724X if PCI
def_bool n
diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig
index 96ed735a4f4a..837f6e5a2f37 100644
--- a/arch/mips/bcm63xx/Kconfig
+++ b/arch/mips/bcm63xx/Kconfig
@@ -5,17 +5,17 @@ menu "CPU support"
config BCM63XX_CPU_3368
bool "support 3368 CPU"
select SYS_HAS_CPU_BMIPS4350
- select HW_HAS_PCI
+ select HAVE_PCI
config BCM63XX_CPU_6328
bool "support 6328 CPU"
select SYS_HAS_CPU_BMIPS4350
- select HW_HAS_PCI
+ select HAVE_PCI
config BCM63XX_CPU_6338
bool "support 6338 CPU"
select SYS_HAS_CPU_BMIPS32_3300
- select HW_HAS_PCI
+ select HAVE_PCI
config BCM63XX_CPU_6345
bool "support 6345 CPU"
@@ -24,22 +24,22 @@ config BCM63XX_CPU_6345
config BCM63XX_CPU_6348
bool "support 6348 CPU"
select SYS_HAS_CPU_BMIPS32_3300
- select HW_HAS_PCI
+ select HAVE_PCI
config BCM63XX_CPU_6358
bool "support 6358 CPU"
select SYS_HAS_CPU_BMIPS4350
- select HW_HAS_PCI
+ select HAVE_PCI
config BCM63XX_CPU_6362
bool "support 6362 CPU"
select SYS_HAS_CPU_BMIPS4350
- select HW_HAS_PCI
+ select HAVE_PCI
config BCM63XX_CPU_6368
bool "support 6368 CPU"
select SYS_HAS_CPU_BMIPS4350
- select HW_HAS_PCI
+ select HAVE_PCI
endmenu
source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
index 8e3a1fc2bc39..188de95d6dbd 100644
--- a/arch/mips/lantiq/Kconfig
+++ b/arch/mips/lantiq/Kconfig
@@ -19,7 +19,7 @@ config SOC_AMAZON_SE
config SOC_XWAY
bool "XWAY"
select SOC_TYPE_XWAY
- select HW_HAS_PCI
+ select HAVE_PCI
select MFD_SYSCON
select MFD_CORE
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index c865b4b9b775..edd23dc4589d 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -15,7 +15,7 @@ config LEMOTE_FULOONG2E
select DMA_NONCOHERENT
select BOOT_ELF32
select BOARD_SCACHE
- select HW_HAS_PCI
+ select HAVE_PCI
select I8259
select ISA
select IRQ_MIPS_CPU
@@ -46,7 +46,7 @@ config LEMOTE_MACH2F
select DMA_NONCOHERENT
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select HAVE_CLK
- select HW_HAS_PCI
+ select HAVE_PCI
select I8259
select IRQ_MIPS_CPU
select ISA
@@ -74,7 +74,7 @@ config LOONGSON_MACH3X
select CSRC_R4K
select CEVT_R4K
select CPU_HAS_WB
- select HW_HAS_PCI
+ select HAVE_PCI
select ISA
select HT_PCI
select I8259
diff --git a/arch/mips/pmcs-msp71xx/Kconfig b/arch/mips/pmcs-msp71xx/Kconfig
index d319bc0c3df6..b185b7620c97 100644
--- a/arch/mips/pmcs-msp71xx/Kconfig
+++ b/arch/mips/pmcs-msp71xx/Kconfig
@@ -6,25 +6,25 @@ choice
config PMC_MSP4200_EVAL
bool "PMC-Sierra MSP4200 Eval Board"
select IRQ_MSP_SLP
- select HW_HAS_PCI
+ select HAVE_PCI
select MIPS_L1_CACHE_SHIFT_4
config PMC_MSP4200_GW
bool "PMC-Sierra MSP4200 VoIP Gateway"
select IRQ_MSP_SLP
- select HW_HAS_PCI
+ select HAVE_PCI
config PMC_MSP7120_EVAL
bool "PMC-Sierra MSP7120 Eval Board"
select SYS_SUPPORTS_MULTITHREADING
select IRQ_MSP_CIC
- select HW_HAS_PCI
+ select HAVE_PCI
config PMC_MSP7120_GW
bool "PMC-Sierra MSP7120 Residential Gateway"
select SYS_SUPPORTS_MULTITHREADING
select IRQ_MSP_CIC
- select HW_HAS_PCI
+ select HAVE_PCI
select MSP_HAS_USB
select MSP_ETH
@@ -32,7 +32,7 @@ config PMC_MSP7120_FPGA
bool "PMC-Sierra MSP7120 FPGA"
select SYS_SUPPORTS_MULTITHREADING
select IRQ_MSP_CIC
- select HW_HAS_PCI
+ select HAVE_PCI
endchoice
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index 1f9cb0e3c79a..4c8006b4a5f7 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -27,18 +27,18 @@ choice
config SOC_RT288X
bool "RT288x"
select MIPS_L1_CACHE_SHIFT_4
- select HW_HAS_PCI
+ select HAVE_PCI
config SOC_RT305X
bool "RT305x"
config SOC_RT3883
bool "RT3883"
- select HW_HAS_PCI
+ select HAVE_PCI
config SOC_MT7620
bool "MT7620/8"
- select HW_HAS_PCI
+ select HAVE_PCI
config SOC_MT7621
bool "MT7621"
@@ -50,7 +50,7 @@ choice
select MIPS_GIC
select COMMON_CLK
select CLKSRC_MIPS_GIC
- select HW_HAS_PCI
+ select HAVE_PCI
endchoice
choice
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
index 7ec278d72096..470d46183677 100644
--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
@@ -3,7 +3,7 @@ config SIBYTE_SB1250
bool
select CEVT_SB1250
select CSRC_SB1250
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select SIBYTE_ENABLE_LDT_IF_PCI
select SIBYTE_HAS_ZBUS_PROFILING
@@ -23,7 +23,7 @@ config SIBYTE_BCM1125
bool
select CEVT_SB1250
select CSRC_SB1250
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select SIBYTE_BCM112X
select SIBYTE_HAS_ZBUS_PROFILING
@@ -33,7 +33,7 @@ config SIBYTE_BCM1125H
bool
select CEVT_SB1250
select CSRC_SB1250
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select SIBYTE_BCM112X
select SIBYTE_ENABLE_LDT_IF_PCI
@@ -52,7 +52,7 @@ config SIBYTE_BCM1x80
bool
select CEVT_BCM1480
select CSRC_BCM1480
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC
@@ -62,7 +62,7 @@ config SIBYTE_BCM1x55
bool
select CEVT_BCM1480
select CSRC_BCM1480
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_MIPS_CPU
select SIBYTE_SB1xxx_SOC
select SIBYTE_HAS_ZBUS_PROFILING
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index d2509c93f0ee..9a22a182b7a4 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -59,7 +59,7 @@ config SOC_TX3927
bool
select CEVT_TXX9
select HAS_TXX9_SERIAL
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_TXX9
select GPIO_TXX9
@@ -67,7 +67,7 @@ config SOC_TX4927
bool
select CEVT_TXX9
select HAS_TXX9_SERIAL
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_TXX9
select PCI_TX4927
select GPIO_TXX9
@@ -77,7 +77,7 @@ config SOC_TX4938
bool
select CEVT_TXX9
select HAS_TXX9_SERIAL
- select HW_HAS_PCI
+ select HAVE_PCI
select IRQ_TXX9
select PCI_TX4927
select GPIO_TXX9
@@ -87,7 +87,7 @@ config SOC_TX4939
bool
select CEVT_TXX9
select HAS_TXX9_SERIAL
- select HW_HAS_PCI
+ select HAVE_PCI
select PCI_TX4927
select HAS_TXX9_ACLC
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
index 992c988b83b0..e0b651db371d 100644
--- a/arch/mips/vr41xx/Kconfig
+++ b/arch/mips/vr41xx/Kconfig
@@ -30,7 +30,7 @@ config TANBAC_TB022X
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_MIPS_CPU
- select HW_HAS_PCI
+ select HAVE_PCI
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
help
@@ -46,7 +46,7 @@ config VICTOR_MPC30X
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_MIPS_CPU
- select HW_HAS_PCI
+ select HAVE_PCI
select PCI_VR41XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -57,7 +57,7 @@ config ZAO_CAPCELLA
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_MIPS_CPU
- select HW_HAS_PCI
+ select HAVE_PCI
select PCI_VR41XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -99,6 +99,6 @@ endchoice
config PCI_VR41XX
bool "Add PCI control unit support of NEC VR4100 series"
- depends on MACH_VR41XX && HW_HAS_PCI
+ depends on MACH_VR41XX && HAVE_PCI
default y
select PCI
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 8e6d83f79e72..b2b08ad9f411 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -19,6 +19,7 @@ config PARISC
select NO_BOOTMEM
select BUG
select BUILDTIME_EXTABLE_SORT
+ select HAVE_PCI
select HAVE_PERF_EVENTS
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_GZIP
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index d4e97469a5f0..086d78c7c2c8 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -168,6 +168,7 @@ config PPC
select GENERIC_CPU_VULNERABILITIES if PPC_BARRIER_NOSPEC
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL
+ select GENERIC_PCI_IOMAP if PCI
select GENERIC_SMP_IDLE_THREAD
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
@@ -190,6 +191,11 @@ config PPC
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_FUNCTION_TRACER
+ # Platforms that what PCI turned unconditionally just do select PCI
+ # in their config node, otherwise allow the user to enable it.
+ # This means we can enable PCI even on platforms that don't support
+ # it, which is harmless except for wasted memory.
+ select HAVE_PCI
select HAVE_GCC_PLUGINS if GCC_VERSION >= 50200 # plugin support on gcc <= 5.1 is buggy on PPC
select HAVE_GENERIC_GUP
select HAVE_HW_BREAKPOINT if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx)
@@ -941,23 +947,6 @@ config FSL_GTM
help
Freescale General-purpose Timers support
-# Platforms that what PCI turned unconditionally just do select PCI
-# in their config node. Platforms that want to choose at config
-# time should select PPC_PCI_CHOICE
-config PPC_PCI_CHOICE
- bool
-
-config PCI
- bool "PCI support" if PPC_PCI_CHOICE
- default y if !40x && !CPM2 && !PPC_8xx && !PPC_83xx \
- && !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON
- select GENERIC_PCI_IOMAP
- help
- Find out whether your system includes a PCI bus. PCI is the name of
- a bus system, i.e. the way the CPU talks to the other stuff inside
- your box. If you say Y here, the kernel will include drivers and
- infrastructure code to support PCI bus devices.
-
config PCI_DOMAINS
def_bool PCI
@@ -970,8 +959,6 @@ config PCI_8260
select PPC_INDIRECT_PCI
default y
-source "drivers/pci/Kconfig"
-
source "drivers/pcmcia/Kconfig"
config HAS_RAPIDIO
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 70856a213663..9c6c77984ac3 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -272,7 +272,6 @@ config XILINX_VIRTEX440_GENERIC_BOARD
config XILINX_ML510
bool "Xilinx ML510 extra support"
depends on XILINX_VIRTEX440_GENERIC_BOARD
- select PPC_PCI_CHOICE
select XILINX_PCI if PCI
select PPC_INDIRECT_PCI if PCI
select PPC_I8259 if PCI
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index b59eab6cbb1b..3639a2a89eb4 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -5,7 +5,6 @@ config PPC_MPC512x
select COMMON_CLK
select FSL_SOC
select IPIC
- select PPC_PCI_CHOICE
select FSL_PCI if PCI
select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index 55a587070342..121235b25305 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -3,7 +3,6 @@ config PPC_MPC52xx
bool "52xx-based boards"
depends on 6xx
select COMMON_CLK
- select PPC_PCI_CHOICE
config PPC_MPC5200_SIMPLE
bool "Generic support for simple MPC5200 based boards"
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 071f53b0c0a0..8f65ec7feb06 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -3,7 +3,6 @@ menuconfig PPC_83xx
bool "83xx-based boards"
depends on 6xx
select PPC_UDBG_16550
- select PPC_PCI_CHOICE
select FSL_PCI if PCI
select FSL_SOC
select IPIC
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 68920d42b4bc..20867a23f3f2 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -5,7 +5,6 @@ menuconfig FSL_SOC_BOOKE
select FSL_SOC
select PPC_UDBG_16550
select MPIC
- select PPC_PCI_CHOICE
select FSL_PCI if PCI
select SERIAL_8250_EXTENDED if SERIAL_8250
select SERIAL_8250_SHARE_IRQ if SERIAL_8250
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index bcd179d3ed92..87220554dd6f 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -70,7 +70,6 @@ endif
config MPC8641
bool
- select PPC_PCI_CHOICE
select FSL_PCI if PCI
select PPC_UDBG_16550
select MPIC
@@ -79,7 +78,6 @@ config MPC8641
config MPC8610
bool
- select PPC_PCI_CHOICE
select FSL_PCI if PCI
select PPC_UDBG_16550
select MPIC
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 14ef17e10ec9..2d28af3681e8 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -285,7 +285,6 @@ config CPM2
bool "Enable support for the CPM2 (Communications Processor Module)"
depends on (FSL_SOC_BOOKE && PPC32) || 8260
select CPM
- select PPC_PCI_CHOICE
select GPIOLIB
help
The CPM2 (Communications Processor Module) is a coprocessor on
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 6c6a7c72cae4..c89500c0747a 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -40,14 +40,12 @@ config 40x
select PPC_DCR_NATIVE
select PPC_UDBG_16550
select 4xx_SOC
- select PPC_PCI_CHOICE
config 44x
bool "AMCC 44x, 46x or 47x"
select PPC_DCR_NATIVE
select PPC_UDBG_16550
select 4xx_SOC
- select PPC_PCI_CHOICE
select PHYS_64BIT
config E200
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index 6f7525555b19..a68c14221523 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -6,7 +6,6 @@ config PPC_PS3
select USB_OHCI_LITTLE_ENDIAN
select USB_OHCI_BIG_ENDIAN_MMIO
select USB_EHCI_BIG_ENDIAN_MMIO
- select PPC_PCI_CHOICE
help
This option enables support for the Sony PS3 game console
and other platforms using the PS3 hypervisor. Enabling this
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index a344980287a5..071952cd4cae 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -39,8 +39,10 @@ config RISCV
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
select HAVE_ARCH_TRACEHOOK
+ select HAVE_PCI
select MODULES_USE_ELF_RELA if MODULES
select THREAD_INFO_IN_TASK
+ select PCI_MSI if PCI
select RISCV_TIMER
select GENERIC_IRQ_MULTI_HANDLER
select ARCH_HAS_PTE_SPECIAL
@@ -216,28 +218,12 @@ source "kernel/Kconfig.hz"
endmenu
-menu "Bus support"
-
-config PCI
- bool "PCI support"
- select PCI_MSI
- help
- This feature enables support for PCI bus system. If you say Y
- here, the kernel will include drivers and infrastructure code
- to support PCI bus devices.
-
- If you don't know what to do here, say Y.
-
config PCI_DOMAINS
def_bool PCI
config PCI_DOMAINS_GENERIC
def_bool PCI
-source "drivers/pci/Kconfig"
-
-endmenu
-
menu "Power management options"
source kernel/power/Kconfig
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 9a9c7a6fe925..1f56c96bb1c9 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -160,15 +160,21 @@ config S390
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_NOP_MCOUNT
select HAVE_OPROFILE
+ select HAVE_PCI
select HAVE_PERF_EVENTS
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_RSEQ
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_VIRT_CPU_ACCOUNTING
+ select IOMMU_HELPER if PCI
+ select IOMMU_SUPPORT if PCI
select MODULES_USE_ELF_RELA
+ select NEED_DMA_MAP_STATE if PCI
+ select NEED_SG_DMA_LENGTH if PCI
select NO_BOOTMEM
select OLD_SIGACTION
select OLD_SIGSUSPEND3
+ select PCI_MSI if PCI
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
select THREAD_INFO_IN_TASK
@@ -698,17 +704,6 @@ config QDIO
If unsure, say Y.
-menuconfig PCI
- bool "PCI support"
- select PCI_MSI
- select IOMMU_HELPER
- select IOMMU_SUPPORT
- select NEED_DMA_MAP_STATE
- select NEED_SG_DMA_LENGTH
-
- help
- Enable PCI support.
-
if PCI
config PCI_NR_FUNCTIONS
@@ -719,13 +714,11 @@ config PCI_NR_FUNCTIONS
This allows you to specify the maximum number of PCI functions which
this kernel will support.
-source "drivers/pci/Kconfig"
-
-endif # PCI
-
config PCI_DOMAINS
def_bool PCI
+endif # PCI
+
config HAS_IOMEM
def_bool PCI
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 1fb7b6d72baf..2ff6855811a5 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -41,13 +41,16 @@ config SUPERH
select GENERIC_IDLE_POLL_SETUP
select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
+ select GENERIC_PCI_IOMAP if PCI
select GENERIC_SCHED_CLOCK
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER
select MODULES_USE_ELF_RELA
+ select NO_GENERIC_PCI_IOPORT_MAP if PCI
select OLD_SIGSUSPEND
select OLD_SIGACTION
+ select PCI_DOMAINS if PCI
select HAVE_ARCH_AUDITSYSCALL
select HAVE_FUTEX_CMPXCHG if FUTEX
select HAVE_NMI
@@ -131,9 +134,6 @@ config SYS_SUPPORTS_SMP
config SYS_SUPPORTS_NUMA
bool
-config SYS_SUPPORTS_PCI
- bool
-
config STACKTRACE_SUPPORT
def_bool y
@@ -858,22 +858,9 @@ config MAPLE
Dreamcast with a serial line terminal or a remote network
connection.
-config PCI
- bool "PCI support"
- depends on SYS_SUPPORTS_PCI
- select PCI_DOMAINS
- select GENERIC_PCI_IOMAP
- select NO_GENERIC_PCI_IOPORT_MAP
- help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. If you have PCI, say Y, otherwise N.
-
config PCI_DOMAINS
bool
-source "drivers/pci/Kconfig"
-
source "drivers/pcmcia/Kconfig"
endmenu
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 6394b4f0a69b..b9a37057b77a 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -101,7 +101,7 @@ config SH_7751_SOLUTION_ENGINE
config SH_7780_SOLUTION_ENGINE
bool "SolutionEngine7780"
select SOLUTION_ENGINE
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
depends on CPU_SUBTYPE_SH7780
help
Select 7780 SolutionEngine if configuring for a Renesas SH7780
@@ -129,7 +129,7 @@ config SH_HP6XX
config SH_DREAMCAST
bool "Dreamcast"
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
depends on CPU_SUBTYPE_SH7091
help
Select Dreamcast if configuring for a SEGA Dreamcast.
@@ -139,7 +139,7 @@ config SH_SH03
bool "Interface CTP/PCI-SH03"
depends on CPU_SUBTYPE_SH7751
select CPU_HAS_IPR_IRQ
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
help
CTP/PCI-SH03 is a CPU module computer that is produced
by Interface Corporation.
@@ -149,7 +149,7 @@ config SH_SECUREEDGE5410
bool "SecureEdge5410"
depends on CPU_SUBTYPE_SH7751R
select CPU_HAS_IPR_IRQ
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
help
Select SecureEdge5410 if configuring for a SnapGear SH board.
This includes both the OEM SecureEdge products as well as the
@@ -158,7 +158,7 @@ config SH_SECUREEDGE5410
config SH_RTS7751R2D
bool "RTS7751R2D"
depends on CPU_SUBTYPE_SH7751R
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
select IO_TRAPPED if MMU
help
Select RTS7751R2D if configuring for a Renesas Technology
@@ -176,7 +176,7 @@ config SH_RSK
config SH_SDK7780
bool "SDK7780R3"
depends on CPU_SUBTYPE_SH7780
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
help
Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
evaluation board.
@@ -184,7 +184,7 @@ config SH_SDK7780
config SH_SDK7786
bool "SDK7786"
depends on CPU_SUBTYPE_SH7786
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
select NO_IOPORT_MAP if !PCI
select HAVE_SRAM_POOL
select REGULATOR_FIXED_VOLTAGE if REGULATOR
@@ -195,7 +195,7 @@ config SH_SDK7786
config SH_HIGHLANDER
bool "Highlander"
depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
select IO_TRAPPED if MMU
config SH_SH7757LCR
@@ -207,7 +207,7 @@ config SH_SH7757LCR
config SH_SH7785LCR
bool "SH7785LCR"
depends on CPU_SUBTYPE_SH7785
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
config SH_SH7785LCR_29BIT_PHYSMAPS
bool "SH7785LCR 29bit physmaps"
@@ -229,7 +229,7 @@ config SH_URQUELL
bool "Urquell"
depends on CPU_SUBTYPE_SH7786
select GPIOLIB
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
select NO_IOPORT_MAP if !PCI
config SH_MIGOR
@@ -302,7 +302,7 @@ config SH_SH4202_MICRODEV
config SH_LANDISK
bool "LANDISK"
depends on CPU_SUBTYPE_SH7751R
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
help
I-O DATA DEVICE, INC. "LANDISK Series" support.
@@ -310,7 +310,7 @@ config SH_TITAN
bool "TITAN"
depends on CPU_SUBTYPE_SH7751R
select CPU_HAS_IPR_IRQ
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
help
Select Titan if you are configuring for a Nimble Microsystems
NetEngine NP51R.
@@ -325,7 +325,7 @@ config SH_SHMIN
config SH_LBOX_RE2
bool "L-BOX RE2"
depends on CPU_SUBTYPE_SH7751R
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
help
Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
@@ -346,7 +346,7 @@ config SH_MAGIC_PANEL_R2
config SH_CAYMAN
bool "Hitachi Cayman"
depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
select ARCH_MIGHT_HAVE_PC_SERIO
config SH_POLARIS
@@ -380,7 +380,7 @@ config SH_APSH4A3A
config SH_APSH4AD0A
bool "AP-SH4AD-0A"
select SH_ALPHA_BOARD
- select SYS_SUPPORTS_PCI
+ select HAVE_PCI
select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7786
help
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index e6f2a38d2e61..fc311b8dc46b 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -21,6 +21,7 @@ config SPARC
select HAVE_ARCH_KGDB if !SMP || SPARC64
select HAVE_ARCH_TRACEHOOK
select HAVE_EXIT_THREAD
+ select HAVE_PCI
select SYSCTL_EXCEPTION_TRACE
select RTC_CLASS
select RTC_DRV_M48T59
@@ -474,18 +475,6 @@ config SUN_LDOMS
Say Y here is you want to support virtual devices via
Logical Domains.
-config PCI
- bool "Support for PCI and PS/2 keyboard/mouse"
- help
- Find out whether your system includes a PCI bus. PCI is the name of
- a bus system, i.e. the way the CPU talks to the other stuff inside
- your box. If you say Y here, the kernel will include drivers and
- infrastructure code to support PCI bus devices.
-
- CONFIG_PCI is needed for all JavaStation's (including MrCoffee),
- CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC.
- All of these platforms are extremely obscure, so say N if unsure.
-
config PCI_DOMAINS
def_bool PCI if SPARC64
@@ -520,8 +509,6 @@ config SPARC_GRPCI2
help
Say Y here to include the GRPCI2 Host Bridge Driver.
-source "drivers/pci/Kconfig"
-
source "drivers/pcmcia/Kconfig"
config SUN_OPENPROMFS
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 6b9938919f0b..de982541a059 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -31,9 +31,6 @@ config ISA
config SBUS
bool
-config PCI
- bool
-
config PCMCIA
bool
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index 60eae744d8fd..601dcad2560e 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -11,6 +11,7 @@ config UNICORE32
select GENERIC_ATOMIC64
select HAVE_KERNEL_LZO
select HAVE_KERNEL_LZMA
+ select HAVE_PCI
select VIRT_TO_BUS
select ARCH_HAVE_CUSTOM_GPIO_H
select GENERIC_FIND_FIRST_BIT
@@ -119,16 +120,6 @@ endmenu
menu "Bus support"
-config PCI
- bool "PCI Support"
- help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
- VESA. If you have PCI, say Y, otherwise N.
-
-source "drivers/pci/Kconfig"
-
source "drivers/pcmcia/Kconfig"
endmenu
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 1a0be022f91d..5816e20a3ff9 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -178,6 +178,7 @@ config X86
select HAVE_PERF_EVENTS
select HAVE_PERF_EVENTS_NMI
select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && HAVE_PERF_EVENTS_NMI
+ select HAVE_PCI
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
select HAVE_RCU_TABLE_FREE if PARAVIRT
@@ -2567,15 +2568,6 @@ endmenu
menu "Bus options (PCI etc.)"
-config PCI
- bool "PCI support"
- default y
- ---help---
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
- VESA. If you have PCI, say Y, otherwise N.
-
choice
prompt "PCI access mode"
depends on X86_32 && PCI
@@ -2658,8 +2650,6 @@ config PCI_CNB20LE_QUIRK
You should say N unless you know you need this.
-source "drivers/pci/Kconfig"
-
config ISA_BUS
bool "ISA bus support on modern systems" if EXPERT
help
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 0eb9f92f3717..f08a74eeb1fe 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -69,6 +69,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_X86_ACPI_CPUFREQ=y
+CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_MSI=y
CONFIG_PCCARD=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index e32fc1f274d8..d053ae4a8098 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -67,6 +67,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_X86_ACPI_CPUFREQ=y
+CONFIG_PCI=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCCARD=y
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index b9ad83a0ee5d..f057c16a48a5 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -30,6 +30,7 @@ config XTENSA
select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_MEMBLOCK
select HAVE_OPROFILE
+ select HAVE_PCI
select HAVE_PERF_EVENTS
select HAVE_STACKPROTECTOR
select IRQ_DOMAIN
@@ -384,21 +385,6 @@ config XTENSA_CALIBRATE_CCOUNT
config SERIAL_CONSOLE
def_bool n
-menu "Bus options"
-
-config PCI
- bool "PCI support"
- default y
- help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
- VESA. If you have PCI, say Y, otherwise N.
-
-source "drivers/pci/Kconfig"
-
-endmenu
-
menu "Platform options"
choice
diff --git a/arch/xtensa/configs/common_defconfig b/arch/xtensa/configs/common_defconfig
index 4bcc76b02109..fa9389869154 100644
--- a/arch/xtensa/configs/common_defconfig
+++ b/arch/xtensa/configs/common_defconfig
@@ -1,3 +1,4 @@
+CONFIG_PCI=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_LOG_BUF_SHIFT=14
diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig
index 4bb5b76d9524..68bf923aec8f 100644
--- a/arch/xtensa/configs/iss_defconfig
+++ b/arch/xtensa/configs/iss_defconfig
@@ -4,7 +4,6 @@ CONFIG_EXPERT=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_PCI is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,38400 eth0=tuntap,,tap0 ip=192.168.168.5:192.168.168.1 root=nfs nfsroot=192.168.168.1:/opt/montavista/pro/devkit/xtensa/linux_be/target memmap=128M@0"
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
diff --git a/drivers/Kconfig b/drivers/Kconfig
index ab4d43923c4d..059573823387 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -1,7 +1,11 @@
# SPDX-License-Identifier: GPL-2.0
menu "Device Drivers"
+# Keep I/O buses first
+
source "drivers/amba/Kconfig"
+source "drivers/pci/Kconfig"
+
source "drivers/base/Kconfig"
diff --git a/drivers/parisc/Kconfig b/drivers/parisc/Kconfig
index 5a48b5606110..5bbfea1a019c 100644
--- a/drivers/parisc/Kconfig
+++ b/drivers/parisc/Kconfig
@@ -63,17 +63,6 @@ config ISA
If you want to plug an ISA card into your EISA bus, say Y here.
Most people should say N.
-config PCI
- bool "PCI support"
- help
- All recent HP machines have PCI slots, and you should say Y here
- if you have a recent machine. If you are convinced you do not have
- PCI slots in your machine (eg a 712), then you may say "N" here.
- Beware that some GSC cards have a Dino onboard and PCI inside them,
- so it may be safest to say "Y" anyway.
-
-source "drivers/pci/Kconfig"
-
config GSC_DINO
bool "GSCtoPCI/Dino PCI support"
depends on PCI && GSC
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 56ff8f6d31fc..6ec796c5931f 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -3,6 +3,18 @@
# PCI configuration
#
+config HAVE_PCI
+ bool
+
+menuconfig PCI
+ bool "PCI support"
+ depends on HAVE_PCI
+
+ help
+ This option enables support for the PCI local bus, including
+ support for PCI-X and the fundations for PCI Express support.
+ Say 'Y' here unless you know what you are doing.
+
source "drivers/pci/pcie/Kconfig"
config PCI_MSI
diff --git a/drivers/pci/endpoint/Kconfig b/drivers/pci/endpoint/Kconfig
index d1e7e4199432..17bbdc9bbde0 100644
--- a/drivers/pci/endpoint/Kconfig
+++ b/drivers/pci/endpoint/Kconfig
@@ -7,7 +7,7 @@ menu "PCI Endpoint"
config PCI_ENDPOINT
bool "PCI Endpoint Support"
- depends on HAS_DMA
+ depends on HAVE_PCI
help
Enable this configuration option to support configurable PCI
endpoint. This should be enabled if the platform has a PCI
--
2.19.1
Powered by blists - more mailing lists