linux-kernel - [PATCH V2] clk: imx7d: remove UART1 clock setting

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 19 Oct 2018 01:05:36 +0000
From:   Anson Huang <anson.huang@....com>
To:     "shawnguo@...nel.org" <shawnguo@...nel.org>,
        "s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
        "kernel@...gutronix.de" <kernel@...gutronix.de>,
        Fabio Estevam <fabio.estevam@....com>,
        "mturquette@...libre.com" <mturquette@...libre.com>,
        "sboyd@...nel.org" <sboyd@...nel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-clk@...r.kernel.org" <linux-clk@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC:     dl-linux-imx <linux-imx@....com>
Subject: [PATCH V2] clk: imx7d: remove UART1 clock setting

There are clock assignments in all i.MX7D dtb files for UART1,
below is the example in imx7d-sdb.dts, so setting UART1 clock
in clock driver is NOT necessary, actually, module clocks setting
should be done in module driver.

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
	status = "okay";
};

Signed-off-by: Anson Huang <Anson.Huang@....com>
---
 drivers/clk/imx/clk-imx7d.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index adb08f6..06c105d 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -886,9 +886,6 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
 	/* use old gpt clk setting, gpt1 root clk must be twice as gpt counter freq */
 	clk_set_parent(clks[IMX7D_GPT1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
 
-	/* set uart module clock's parent clock source that must be great then 80MHz */
-	clk_set_parent(clks[IMX7D_UART1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
-
 	/* Set clock rate for USBPHY, the USB_PLL at CCM is from USBOTG2 */
 	clks[IMX7D_USB1_MAIN_480M_CLK] = imx_clk_fixed_factor("pll_usb1_main_clk", "osc", 20, 1);
 	clks[IMX7D_USB_MAIN_480M_CLK] = imx_clk_fixed_factor("pll_usb_main_clk", "osc", 20, 1);
-- 
2.7.4