linux-kernel - Re: [PATCH] ARM: dts: imx6sx-sdb: Add flexcan support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 19 Oct 2018 09:51:55 -0300
From:   Fabio Estevam <festevam@...il.com>
To:     qiangqing.zhang@....com
Cc:     Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Sascha Hauer <kernel@...gutronix.de>,
        Fabio Estevam <fabio.estevam@....com>,
        NXP Linux Team <linux-imx@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Dong Aisheng <aisheng.dong@....com>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        linux-kernel <linux-kernel@...r.kernel.org>,
        "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
        <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH] ARM: dts: imx6sx-sdb: Add flexcan support

Hi Joakim,

On Fri, Oct 19, 2018 at 6:43 AM Joakim Zhang <qiangqing.zhang@....com> wrote:
>
> From: Dong Aisheng <aisheng.dong@....com>
>
> CAN transceiver is different on RevA and RevB board.
> It's active high on RevA while active low on Rev B.
>
> Signed-off-by: Dong Aisheng <aisheng.dong@....com>
> Signed-off-by: Joakim Zhang <qiangqing.zhang@....com>
> ---
>  arch/arm/boot/dts/imx6sx-sdb.dts  |  5 ++++
>  arch/arm/boot/dts/imx6sx-sdb.dtsi | 42 +++++++++++++++++++++++++++++++
>  2 files changed, 47 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
> index 6dd9bebfe027..092b8de142a8 100644
> --- a/arch/arm/boot/dts/imx6sx-sdb.dts
> +++ b/arch/arm/boot/dts/imx6sx-sdb.dts
> @@ -10,6 +10,11 @@
>
>  / {
>         model = "Freescale i.MX6 SoloX SDB RevB Board";
> +
> +       /* Transceiver EN/STBY is active low on RevB board */
> +       reg_can_stby: regulator-can-stby {
> +               gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;

Don't we need a  gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; and also a
"enable-active-high" entries in the imx6sx-sdb-reva.dts?