| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 19 Oct 2018 16:48:06 +0300
From: Andy Shevchenko <andy.shevchenko@...il.com>
To: Lubomir Rintel <lkundrak@...sk>
Cc: Mark Brown <broonie@...nel.org>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Darren Hart <dvhart@...radead.org>,
Andy Shevchenko <andy@...radead.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
quozl@...top.org, Sebastian Reichel <sre@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Eric Miao <eric.y.miao@...il.com>,
Haojian Zhuang <haojian.zhuang@...il.com>,
Daniel Mack <daniel@...que.org>,
Robert Jarzmik <robert.jarzmik@...e.fr>,
linux-spi <linux-spi@...r.kernel.org>,
devicetree <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-arm Mailing List <linux-arm-kernel@...ts.infradead.org>,
Platform Driver <platform-driver-x86@...r.kernel.org>,
devel@...verdev.osuosl.org, Linux PM <linux-pm@...r.kernel.org>
Subject: Re: [PATCH 13/15] power: supply: olpc_battery: Move priv data to a struct
On Wed, Oct 10, 2018 at 8:24 PM Lubomir Rintel <lkundrak@...sk> wrote:
>
> The global variables for private data are not too nice. I'd like some
> more, and that would clutter the global name space even further.
>
Good change!
Reviewed-by: Andy Shevchenko <andy.shevchenko@...il.com>
> Signed-off-by: Lubomir Rintel <lkundrak@...sk>
> ---
> drivers/power/supply/olpc_battery.c | 73 +++++++++++++++--------------
> 1 file changed, 38 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/power/supply/olpc_battery.c b/drivers/power/supply/olpc_battery.c
> index 540d44bf536f..2a2d7cc995f0 100644
> --- a/drivers/power/supply/olpc_battery.c
> +++ b/drivers/power/supply/olpc_battery.c
> @@ -53,6 +53,12 @@
>
> #define BAT_ADDR_MFR_TYPE 0x5F
>
> +struct olpc_battery_data {
> + struct power_supply *olpc_ac;
> + struct power_supply *olpc_bat;
> + char bat_serial[17];
> +};
> +
> /*********************************************************************
> * Power
> *********************************************************************/
> @@ -91,11 +97,8 @@ static const struct power_supply_desc olpc_ac_desc = {
> .get_property = olpc_ac_get_prop,
> };
>
> -static struct power_supply *olpc_ac;
> -
> -static char bat_serial[17]; /* Ick */
> -
> -static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte)
> +static int olpc_bat_get_status(struct olpc_battery_data *data,
> + union power_supply_propval *val, uint8_t ec_byte)
> {
> if (olpc_platform_info.ecver > 0x44) {
> if (ec_byte & (BAT_STAT_CHARGING | BAT_STAT_TRICKLE))
> @@ -326,6 +329,7 @@ static int olpc_bat_get_property(struct power_supply *psy,
> enum power_supply_property psp,
> union power_supply_propval *val)
> {
> + struct olpc_battery_data *data = power_supply_get_drvdata(psy);
> int ret = 0;
> __be16 ec_word;
> uint8_t ec_byte;
> @@ -347,7 +351,7 @@ static int olpc_bat_get_property(struct power_supply *psy,
>
> switch (psp) {
> case POWER_SUPPLY_PROP_STATUS:
> - ret = olpc_bat_get_status(val, ec_byte);
> + ret = olpc_bat_get_status(data, val, ec_byte);
> if (ret)
> return ret;
> break;
> @@ -450,8 +454,8 @@ static int olpc_bat_get_property(struct power_supply *psy,
> if (ret)
> return ret;
>
> - sprintf(bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf));
> - val->strval = bat_serial;
> + sprintf(data->bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf));
> + val->strval = data->bat_serial;
> break;
> case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
> ret = olpc_bat_get_voltage_max_design(val);
> @@ -579,17 +583,17 @@ static struct power_supply_desc olpc_bat_desc = {
> .use_for_apm = 1,
> };
>
> -static struct power_supply *olpc_bat;
> -
> static int olpc_battery_suspend(struct platform_device *pdev,
> pm_message_t state)
> {
> - if (device_may_wakeup(&olpc_ac->dev))
> + struct olpc_battery_data *data = platform_get_drvdata(pdev);
> +
> + if (device_may_wakeup(&data->olpc_ac->dev))
> olpc_ec_wakeup_set(EC_SCI_SRC_ACPWR);
> else
> olpc_ec_wakeup_clear(EC_SCI_SRC_ACPWR);
>
> - if (device_may_wakeup(&olpc_bat->dev))
> + if (device_may_wakeup(&data->olpc_bat->dev))
> olpc_ec_wakeup_set(EC_SCI_SRC_BATTERY | EC_SCI_SRC_BATSOC
> | EC_SCI_SRC_BATERR);
> else
> @@ -601,7 +605,8 @@ static int olpc_battery_suspend(struct platform_device *pdev,
>
> static int olpc_battery_probe(struct platform_device *pdev)
> {
> - int ret;
> + struct power_supply_config psy_cfg = {};
> + struct olpc_battery_data *data;
> uint8_t status;
>
> /*
> @@ -620,9 +625,13 @@ static int olpc_battery_probe(struct platform_device *pdev)
>
> /* Ignore the status. It doesn't actually matter */
>
> - olpc_ac = power_supply_register(&pdev->dev, &olpc_ac_desc, NULL);
> - if (IS_ERR(olpc_ac))
> - return PTR_ERR(olpc_ac);
> + psy_cfg.of_node = pdev->dev.of_node;
> + psy_cfg.drv_data = data;
> +
> + data->olpc_ac = devm_power_supply_register(&pdev->dev, &olpc_ac_desc, &psy_cfg);
> + if (IS_ERR(data->olpc_ac))
> + return PTR_ERR(data->olpc_ac);
> +
> if (of_property_match_string(pdev->dev.of_node, "compatible",
> "olpc,xo1.5-battery") >= 0) {
> /* XO-1.5 */
> @@ -634,42 +643,36 @@ static int olpc_battery_probe(struct platform_device *pdev)
> olpc_bat_desc.num_properties = ARRAY_SIZE(olpc_xo1_bat_props);
> }
>
> - olpc_bat = power_supply_register(&pdev->dev, &olpc_bat_desc, NULL);
> - if (IS_ERR(olpc_bat)) {
> - ret = PTR_ERR(olpc_bat);
> - goto battery_failed;
> - }
> + data->olpc_bat = devm_power_supply_register(&pdev->dev, &olpc_bat_desc, &psy_cfg);
> + if (IS_ERR(data->olpc_bat))
> + return PTR_ERR(data->olpc_bat);
>
> - ret = device_create_bin_file(&olpc_bat->dev, &olpc_bat_eeprom);
> + ret = device_create_bin_file(&data->olpc_bat->dev, &olpc_bat_eeprom);
> if (ret)
> - goto eeprom_failed;
> + return ret;
>
> - ret = device_create_file(&olpc_bat->dev, &olpc_bat_error);
> + ret = device_create_file(&data->olpc_bat->dev, &olpc_bat_error);
> if (ret)
> goto error_failed;
>
> if (olpc_ec_wakeup_available()) {
> - device_set_wakeup_capable(&olpc_ac->dev, true);
> - device_set_wakeup_capable(&olpc_bat->dev, true);
> + device_set_wakeup_capable(&data->olpc_ac->dev, true);
> + device_set_wakeup_capable(&data->olpc_bat->dev, true);
> }
>
> return 0;
>
> error_failed:
> - device_remove_bin_file(&olpc_bat->dev, &olpc_bat_eeprom);
> -eeprom_failed:
> - power_supply_unregister(olpc_bat);
> -battery_failed:
> - power_supply_unregister(olpc_ac);
> + device_remove_bin_file(&data->olpc_bat->dev, &olpc_bat_eeprom);
> return ret;
> }
>
> static int olpc_battery_remove(struct platform_device *pdev)
> {
> - device_remove_file(&olpc_bat->dev, &olpc_bat_error);
> - device_remove_bin_file(&olpc_bat->dev, &olpc_bat_eeprom);
> - power_supply_unregister(olpc_bat);
> - power_supply_unregister(olpc_ac);
> + struct olpc_battery_data *data = platform_get_drvdata(pdev);
> +
> + device_remove_file(&data->olpc_bat->dev, &olpc_bat_error);
> + device_remove_bin_file(&data->olpc_bat->dev, &olpc_bat_eeprom);
> return 0;
> }
>
> --
> 2.19.0
>
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists