| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20181019213013.GW22824@google.com>
Date: Fri, 19 Oct 2018 14:30:13 -0700
From: Matthias Kaehlcke <mka@...omium.org>
To: Taniya Das <tdas@...eaurora.org>
Cc: "Rafael J. Wysocki" <rjw@...ysocki.net>,
Viresh Kumar <viresh.kumar@...aro.org>,
linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
Stephen Boyd <sboyd@...nel.org>,
Rajendra Nayak <rnayak@...eaurora.org>,
devicetree@...r.kernel.org, robh@...nel.org,
skannan@...eaurora.org, linux-arm-msm@...r.kernel.org,
amit.kucheria@...aro.org, evgreen@...gle.com
Subject: Re: [PATCH 1/2] dt-bindings: cpufreq: Introduce QCOM CPUFREQ
Firmware bindings
On Thu, Oct 11, 2018 at 05:06:00PM +0530, Taniya Das wrote:
> Add QCOM cpufreq firmware device bindings for Qualcomm Technology Inc's
> SoCs. This is required for managing the cpu frequency transitions which are
> controlled by the hardware engine.
>
> Signed-off-by: Taniya Das <tdas@...eaurora.org>
> ---
> .../bindings/cpufreq/cpufreq-qcom-hw.txt | 173 +++++++++++++++++++++
> 1 file changed, 173 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
>
> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
> new file mode 100644
> index 0000000..712643f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
> @@ -0,0 +1,173 @@
> +Qualcomm Technologies, Inc. CPUFREQ Bindings
> +
> +CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
> +SoCs to manage frequency in hardware. It is capable of controlling frequency
> +for multiple clusters.
> +
> +Properties:
> +- compatible
> + Usage: required
> + Value type: <string>
> + Definition: must be "qcom,cpufreq-hw".
> +
> +- clocks
> + Usage: required
> + Value type: <phandle> From common clock binding.
> + Definition: clock handle for XO clock and GPLL0 clock.
> +
> +- clock-names
> + Usage: required
> + Value type: <string> From common clock binding.
> + Definition: must be "xo", "cpu_clk".
> +
> +- reg
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: Addresses and sizes for the memory of the HW bases in
> + each frequency domain.
> +- reg-names
> + Usage: Optional
> + Value type: <string>
> + Definition: Frequency domain name i.e.
> + "freq-domain0", "freq-domain1".
> +
> +- freq-domain-cells:
> + Usage: required.
> + Definition: Number of cells in a freqency domain specifier.
> +
> +* Property qcom,freq-domain
> +Devices supporting freq-domain must set their "qcom,freq-domain" property with
> +phandle to a cpufreq_hw followed by the Domain ID(0/1) in the CPU DT node.
> +
> +
> +Example:
> +
> +Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch
> +DCVS state together.
> +
> +/ {
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + CPU0: cpu@0 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + qcom,freq-domain = <&cpufreq_hw 0>;
> + L2_0: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + L3_0: l3-cache {
> + compatible = "cache";
> + };
> + };
> + };
> +
> + CPU1: cpu@100 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x100>;
> + enable-method = "psci";
> + next-level-cache = <&L2_100>;
> + qcom,freq-domain = <&cpufreq_hw 0>;
> + L2_100: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU2: cpu@200 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x200>;
> + enable-method = "psci";
> + next-level-cache = <&L2_200>;
> + qcom,freq-domain = <&cpufreq_hw 0>;
> + L2_200: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU3: cpu@300 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x300>;
> + enable-method = "psci";
> + next-level-cache = <&L2_300>;
> + qcom,freq-domain = <&cpufreq_hw 0>;
> + L2_300: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU4: cpu@400 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x400>;
> + enable-method = "psci";
> + next-level-cache = <&L2_400>;
> + qcom,freq-domain = <&cpufreq_hw 1>;
> + L2_400: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU5: cpu@500 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x500>;
> + enable-method = "psci";
> + next-level-cache = <&L2_500>;
> + qcom,freq-domain = <&cpufreq_hw 1>;
> + L2_500: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU6: cpu@600 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x600>;
> + enable-method = "psci";
> + next-level-cache = <&L2_600>;
> + qcom,freq-domain = <&cpufreq_hw 1>;
> + L2_600: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU7: cpu@700 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x700>;
> + enable-method = "psci";
> + next-level-cache = <&L2_700>;
> + qcom,freq-domain = <&cpufreq_hw 1>;
> + L2_700: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> + };
> +
> + soc {
> + cpufreq_hw: cpufreq@...43000 {
> + compatible = "qcom,cpufreq-hw";
> + reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
> + reg-names = "freq-domain0", "freq-domain1";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
> + clock-names = "xo", "cpu_clk";
> +
> + #freq-domain-cells = <1>
semicolon is missing.
> +
delete empty line
> + };
> +}
Thanks
Matthias
Powered by blists - more mailing lists