[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181020133823.27103-1-paul.walmsley@sifive.com>
Date: Sat, 20 Oct 2018 06:38:21 -0700
From: Paul Walmsley <paul.walmsley@...ive.com>
To: linux-clk@...r.kernel.org, devicetree@...r.kernel.org
Cc: Paul Walmsley <paul.walmsley@...ive.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Albert Ou <aou@...s.berkeley.edu>,
"Wesley W . Terpstra" <wesley@...ive.com>,
Palmer Dabbelt <palmer@...ive.com>,
Megan Wachs <megan@...ive.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-riscv@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH 0/3] clk: add driver for the SiFive FU540 PRCI and PLLs it controls
Add a driver for the SiFive FU540 PRCI IP block, which handles clock and
some device reset control for the SiFive FU540 chip. Also add a driver-
independent library for the Analog Bits Wide-Range PLL (WRPLL), used by
the PRCI driver to monitor and control the WRPLL instances on the FU540
chip.
It's been a long time since I've worked on Linux clock code, so Mike &
Stephen, I'd appreciate a close look at the PRCI driver to make sure
what it's doing makes sense.
Boot-tested on a SiFive HiFive Unleashed board. COREPLL rate changes
and notification were also tested on the same board.
This patch series is also available at:
https://github.com/sifive/riscv-linux/tree/dev/paulw/prci-v4.19-rc7
Paul Walmsley (3):
clk: analogbits: add Wide-Range PLL library
dt-bindings: clk: add documentation for the SiFive PRCI driver
clk: sifive: add a driver for the SiFive FU540 PRCI IP block
.../bindings/clock/sifive/fu540-prci.txt | 40 ++
MAINTAINERS | 6 +
drivers/clk/Kconfig | 2 +
drivers/clk/Makefile | 2 +
drivers/clk/analogbits/Kconfig | 3 +
drivers/clk/analogbits/Makefile | 2 +
drivers/clk/analogbits/wrpll-cln28hpc.c | 387 +++++++++++
drivers/clk/sifive/Kconfig | 18 +
drivers/clk/sifive/Makefile | 1 +
drivers/clk/sifive/fu540-prci.c | 634 ++++++++++++++++++
include/linux/clk/analogbits-wrpll-cln28hpc.h | 99 +++
include/linux/clk/sifive-fu540-prci.h | 27 +
12 files changed, 1221 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt
create mode 100644 drivers/clk/analogbits/Kconfig
create mode 100644 drivers/clk/analogbits/Makefile
create mode 100644 drivers/clk/analogbits/wrpll-cln28hpc.c
create mode 100644 drivers/clk/sifive/Kconfig
create mode 100644 drivers/clk/sifive/Makefile
create mode 100644 drivers/clk/sifive/fu540-prci.c
create mode 100644 include/linux/clk/analogbits-wrpll-cln28hpc.h
create mode 100644 include/linux/clk/sifive-fu540-prci.h
Cc: Michael Turquette <mturquette@...libre.com>
Cc: Stephen Boyd <sboyd@...nel.org>
Cc: Albert Ou <aou@...s.berkeley.edu>
Cc: Wesley W. Terpstra <wesley@...ive.com>
Cc: Palmer Dabbelt <palmer@...ive.com>
Cc: Megan Wachs <megan@...ive.com>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: Mark Rutland <mark.rutland@....com>
Cc: devicetree@...r.kernel.org
Cc: linux-riscv@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org
Cc: linux-clk@...r.kernel.org
--
2.19.1
Powered by blists - more mailing lists