linux-kernel - [PATCH v2 2/3] dt-bindings: clk: add documentation for the SiFive PRCI driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181020135024.28573-3-paul.walmsley@sifive.com>
Date:   Sat, 20 Oct 2018 06:50:23 -0700
From:   Paul Walmsley <paul.walmsley@...ive.com>
To:     linux-clk@...r.kernel.org, devicetree@...r.kernel.org
Cc:     Paul Walmsley <paul.walmsley@...ive.com>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Palmer Dabbelt <palmer@...ive.com>,
        Megan Wachs <megan@...ive.com>,
        linux-riscv@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Paul Walmsley <paul@...an.com>
Subject: [PATCH v2 2/3] dt-bindings: clk: add documentation for the SiFive PRCI driver

Add DT binding documentation for the Linux driver for the SiFive
PRCI clock & reset control IP block, as found on the SiFive
FU540 chip.

Cc: Michael Turquette <mturquette@...libre.com>
Cc: Stephen Boyd <sboyd@...nel.org>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: Mark Rutland <mark.rutland@....com>
Cc: Palmer Dabbelt <palmer@...ive.com>
Cc: Megan Wachs <megan@...ive.com>
Cc: linux-clk@...r.kernel.org
Cc: devicetree@...r.kernel.org
Cc: linux-riscv@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org
Signed-off-by: Paul Walmsley <paul.walmsley@...ive.com>
Signed-off-by: Paul Walmsley <paul@...an.com>
---
v2: remove out-of-date example, add documentation for the compatible
    string and for the required PCB clock nodes

.../bindings/clock/sifive/fu540-prci.txt      | 43 +++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt

diff --git a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt
new file mode 100644
index 000000000000..d7c1e83fa5ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt
@@ -0,0 +1,43 @@
+SiFive FU540 PRCI bindings
+
+On the FU540 family of SoCs, most system-wide clock and reset integration
+is via the PRCI IP block.
+
+Required properties:
+- compatible: Should be "sifive,<chip>-prci<version>".  As of the time this
+              file was written, only one value is supported:
+	      "sifive,fu540-c000-prci0"
+- reg: Should describe the PRCI's register target physical address region
+- clocks: Should point to the hfclk device tree node and the rtcclk
+          device tree node.  The RTC clock here is not a time-of-day clock,
+	  but is instead a high-stability clock source for system timers
+	  and cycle counters.
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock via the clock ID
+macros defined in include/linux/clk/sifive-fu540-prci.h.  These macros
+begin with PRCI_CLK_.
+
+The hfclk and rtcclk nodes are required, and represent physical
+crystals or resonators located on the PCB.
+
+Examples:
+
+hfclk: hfclk {
+	#clock-cells = <0>;
+	compatible = "fixed-clock";
+	clock-frequency = <33333333>;
+	clock-output-names = "hfclk";
+};
+rtcclk: rtcclk {
+	#clock-cells = <0>;
+	compatible = "fixed-clock";
+	clock-frequency = <1000000>;
+	clock-output-names = "rtcclk";
+};
+prci0: prci@...00000 {
+	compatible = "sifive,fu540-c000-prci0";
+	reg = <0x0 0x10000000 0x0 0x1000>;
+	clocks = <&hfclk>, <&rtcclk>;
+	#clock-cells = <1>;
+};
-- 
2.19.1