[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20181020023318.21663-1-qiangqing.zhang@nxp.com>
Date: Sat, 20 Oct 2018 02:35:36 +0000
From: Joakim Zhang <qiangqing.zhang@....com>
To: "shawnguo@...nel.org" <shawnguo@...nel.org>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
Fabio Estevam <fabio.estevam@....com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>
CC: dl-linux-imx <linux-imx@....com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"A.s. Dong" <aisheng.dong@....com>,
Joakim Zhang <qiangqing.zhang@....com>
Subject: [PATCH v2 1/1] ARM: dts: imx6sx-sdb: Add flexcan support
From: Dong Aisheng <aisheng.dong@....com>
CAN transceiver is different on RevA and RevB board.
It's active high on RevA while active low on Rev B.
Signed-off-by: Dong Aisheng <aisheng.dong@....com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@....com>
---
arch/arm/boot/dts/imx6sx-sdb-reva.dts | 12 ++++++++
arch/arm/boot/dts/imx6sx-sdb.dts | 5 ++++
arch/arm/boot/dts/imx6sx-sdb.dtsi | 42 +++++++++++++++++++++++++++
3 files changed, 59 insertions(+)
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index 9cc6ff206aea..d98dcf00b9c4 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -10,6 +10,18 @@
/ {
model = "Freescale i.MX6 SoloX SDB RevA Board";
+
+ /* Transceiver EN/STBY is active high on RevA board */
+ reg_can_en: regulator-can-en {
+ gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can_stby: regulator-can-stby {
+ gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_can_en>;
+ };
};
&i2c1 {
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 6dd9bebfe027..092b8de142a8 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -10,6 +10,11 @@
/ {
model = "Freescale i.MX6 SoloX SDB RevB Board";
+
+ /* Transceiver EN/STBY is active low on RevB board */
+ reg_can_stby: regulator-can-stby {
+ gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
+ };
};
&i2c1 {
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index f8f31872fa14..e37ec4b396a2 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -136,6 +136,20 @@
regulator-max-microvolt = <5000000>;
};
+ reg_can_en: regulator-can-en {
+ compatible = "regulator-fixed";
+ regulator-name = "can-en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_can_stby: regulator-can-stby {
+ compatible = "regulator-fixed";
+ regulator-name = "can-stby";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
sound {
compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
model = "wm8962-audio";
@@ -202,6 +216,20 @@
status = "okay";
};
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can_stby>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can_stby>;
+ status = "okay";
+};
+
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -397,6 +425,20 @@
>;
};
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020
+ MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b020
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020
+ MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b020
+ >;
+ };
+
pinctrl_gpio_keys: gpio_keysgrp {
fsl,pins = <
MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
--
2.17.1
Powered by blists - more mailing lists