linux-kernel - Re: [PATCH 2/2] perf script: flush output stream after events in verbose mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4444017.LnbBPIbh24@agathebauer>
Date:   Mon, 22 Oct 2018 12:09:22 +0200
From:   Milian Wolff <milian.wolff@...b.com>
To:     Jiri Olsa <jolsa@...hat.com>
Cc:     acme@...nel.org, jolsa@...nel.org, Linux-kernel@...r.kernel.org,
        linux-perf-users@...r.kernel.org
Subject: Re: [PATCH 2/2] perf script: flush output stream after events in
 verbose mode

On Montag, 22. Oktober 2018 11:43:17 CEST Jiri Olsa wrote:
> On Sun, Oct 21, 2018 at 09:14:24PM +0200, Milian Wolff wrote:
> > When the perf script output is written to a terminal stream,
> > the normal output of `perf script` would get buffered, but its
> > debug output would be written directly. This made it quite hard
> > to figure out where a given debug output is coming from. We can
> > improve on this by flushing the output buffer after processing an
> > event. To see the value, compare the following output for a
> > `perf script -v` run:
> > 
> > Before this patch:
> > ```
> > unwind: reg 16, val 7faf7dfdc000
> > unwind: reg 7, val 7ffc80811e30
> > unwind: find_proc_info dso /usr/lib/ld-2.28.so
> > unwind: reg 6, val 0
> > unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
> > unwind: reg 16, val 7faf7dfdc000
> > unwind: reg 7, val 7ffc80811e30
> > unwind: find_proc_info dso /usr/lib/ld-2.28.so
> > unwind: reg 6, val 0
> > unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
> > unwind: reg 16, val 7faf7dfdc000
> > unwind: reg 7, val 7ffc80811e30
> > unwind: find_proc_info dso /usr/lib/ld-2.28.so
> > unwind: reg 6, val 0
> > unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
> > unwind: reg 16, val 7faf7dfdc000
> > unwind: reg 7, val 7ffc80811e30
> > ... lots and lots of verbose debug output
> > 
> > cpp-inlining 24617 90229.122036534:          1 cycles:uppp:
> >             7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)
> > 
> > cpp-inlining 24617 90229.122043974:          1 cycles:uppp:
> >             7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)
> > 
> > ...
> > ```
> > 
> > After this patch:
> > ```
> > ...
> > unwind: reg 16, val 7faf7dfdc000
> > unwind: reg 7, val 7ffc80811e30
> > unwind: find_proc_info dso /usr/lib/ld-2.28.so
> > unwind: reg 6, val 0
> > unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
> > 
> > cpp-inlining 24617 90229.122036534:          1 cycles:uppp:
> >             7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)
> > 
> > unwind: reg 16, val 7faf7dfdc000
> > unwind: reg 7, val 7ffc80811e30
> > unwind: find_proc_info dso /usr/lib/ld-2.28.so
> > unwind: reg 6, val 0
> > unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
> > 
> > cpp-inlining 24617 90229.122043974:          1 cycles:uppp:
> >             7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)
> > 
> > ...
> > ```
> > 
> > This new output format makes it much easier to use perf script
> > output for debugging purposes, e.g. to investigate broken dwarf
> > unwinding.
> 
> yep, I plan to check on this ;-)
> 
> > Signed-off-by: Milian Wolff <milian.wolff@...b.com>
> > Cc: Arnaldo Carvalho de Melo <acme@...nel.org>
> > ---
> > 
> >  tools/perf/builtin-script.c | 3 +++
> >  1 file changed, 3 insertions(+)
> > 
> > diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c
> > index bd468b90801b..ca09b7d2adb7 100644
> > --- a/tools/perf/builtin-script.c
> > +++ b/tools/perf/builtin-script.c
> > @@ -1737,6 +1737,9 @@ static void process_event(struct perf_script
> > *script,
> > 
> >  	if (PRINT_FIELD(METRIC))
> >  	
> >  		perf_sample__fprint_metric(script, thread, evsel, sample, fp);
> > 
> > +
> > +	if (verbose)
> > +		fflush(fp);
> 
> should we call fflush(NULL) to dump all the streams?
> 
> the verbose goes to stderr and fp seems to be stdout byt default

stderr isn't buffered, so we don't need to flush it. So personally, I don't 
see a need to dump all streams - fp should be enough? Can you maybe explain 
where it would be required to flush more buffers?

Thanks

-- 
Milian Wolff | milian.wolff@...b.com | Senior Software Engineer
KDAB (Deutschland) GmbH, a KDAB Group company
Tel: +49-30-521325470
KDAB - The Qt, C++ and OpenGL Experts
Download attachment "smime.p7s" of type "application/pkcs7-signature" (3826 bytes)