[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181023160319.27003-1-jbrunet@baylibre.com>
Date: Tue, 23 Oct 2018 18:03:19 +0200
From: Jerome Brunet <jbrunet@...libre.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Kevin Hilman <khilman@...libre.com>,
Carlo Caione <carlo@...one.org>
Cc: Jerome Brunet <jbrunet@...libre.com>, linux-gpio@...r.kernel.org,
linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH] pinctrl: meson: fix pinconf bias disable
If a bias is enabled on a pin of an Amlogic SoC, calling .pin_config_set()
with PIN_CONFIG_BIAS_DISABLE will not disable the bias. Instead it will
force a pull-down bias on the pin.
Instead of the pull type register bank, the driver should access the pull
enable register bank.
Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs")
Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
---
drivers/pinctrl/meson/pinctrl-meson.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c
index 29a458da78db..4f3ab18636a3 100644
--- a/drivers/pinctrl/meson/pinctrl-meson.c
+++ b/drivers/pinctrl/meson/pinctrl-meson.c
@@ -192,7 +192,7 @@ static int meson_pinconf_set(struct pinctrl_dev *pcdev, unsigned int pin,
dev_dbg(pc->dev, "pin %u: disable bias\n", pin);
meson_calc_reg_and_bit(bank, pin, REG_PULL, ®, &bit);
- ret = regmap_update_bits(pc->reg_pull, reg,
+ ret = regmap_update_bits(pc->reg_pullen, reg,
BIT(bit), 0);
if (ret)
return ret;
--
2.17.2
Powered by blists - more mailing lists