| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20181024021122.3942-2-andy.tang@nxp.com>
Date: Wed, 24 Oct 2018 10:11:21 +0800
From: andy.tang@....com
To: sboyd@...nel.org, mturquette@...libre.com, oss@...error.net
Cc: robh+dt@...nel.org, mark.rutland@....com, benh@...nel.crashing.org,
paulus@...ba.org, mpe@...erman.id.au, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linuxppc-dev@...ts.ozlabs.org, Yuantian Tang <andy.tang@....com>
Subject: [PATCH 2/3 v2] clk: qoriq: remove legacy bindings and add more compatibles
From: Yuantian Tang <andy.tang@....com>
The new bindings will be used, so delete the old bindings.
Add more SOC compatibles as needed as well.
Signed-off-by: Tang Yuantian <andy.tang@....com>
---
v2:
- involve more chips
.../devicetree/bindings/clock/qoriq-clock.txt | 112 +------------------
1 files changed, 6 insertions(+), 106 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
index 97f46ad..8484d90 100644
--- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
+++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
@@ -28,6 +28,12 @@ Required properties:
* "fsl,p4080-clockgen"
* "fsl,p5020-clockgen"
* "fsl,p5040-clockgen"
+ * "fsl,t1023-clockgen"
+ * "fsl,t1024-clockgen"
+ * "fsl,t1040-clockgen"
+ * "fsl,t1042-clockgen"
+ * "fsl,t2080-clockgen"
+ * "fsl,t2081-clockgen"
* "fsl,t4240-clockgen"
* "fsl,b4420-clockgen"
* "fsl,b4860-clockgen"
@@ -96,109 +102,3 @@ second cell is the clock index for the specified type.
...
};
}
-4. Legacy Child Nodes
-
-NOTE: These nodes are deprecated. Kernels should continue to support
-device trees with these nodes, but new device trees should not use them.
-
-Most of the bindings are from the common clock binding[1].
- [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : Should include one of the following:
- * "fsl,qoriq-core-pll-1.0" for core PLL clocks (v1.0)
- * "fsl,qoriq-core-pll-2.0" for core PLL clocks (v2.0)
- * "fsl,qoriq-core-mux-1.0" for core mux clocks (v1.0)
- * "fsl,qoriq-core-mux-2.0" for core mux clocks (v2.0)
- * "fsl,qoriq-sysclk-1.0": for input system clock (v1.0).
- It takes parent's clock-frequency as its clock.
- * "fsl,qoriq-sysclk-2.0": for input system clock (v2.0).
- It takes parent's clock-frequency as its clock.
- * "fsl,qoriq-platform-pll-1.0" for the platform PLL clock (v1.0)
- * "fsl,qoriq-platform-pll-2.0" for the platform PLL clock (v2.0)
-- #clock-cells: From common clock binding. The number of cells in a
- clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
- clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks.
- For "fsl,qoriq-core-pll-[1,2].0" clocks, the single
- clock-specifier cell may take the following values:
- * 0 - equal to the PLL frequency
- * 1 - equal to the PLL frequency divided by 2
- * 2 - equal to the PLL frequency divided by 4
-
-Recommended properties:
-- clocks: Should be the phandle of input parent clock
-- clock-names: From common clock binding, indicates the clock name
-- clock-output-names: From common clock binding, indicates the names of
- output clocks
-- reg: Should be the offset and length of clock block base address.
- The length should be 4.
-
-Legacy Example:
-/ {
- clockgen: global-utilities@...00 {
- compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
- ranges = <0x0 0xe1000 0x1000>;
- clock-frequency = <133333333>;
- reg = <0xe1000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-1.0";
- clock-output-names = "sysclk";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2";
- };
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux0";
- };
-
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux1";
- };
-
- platform-pll: platform-pll@c00 {
- #clock-cells = <1>;
- reg = <0xc00 0x4>;
- compatible = "fsl,qoriq-platform-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "platform-pll", "platform-pll-div2";
- };
- };
-};
-
-Example for legacy clock consumer:
-
-/ {
- cpu0: PowerPC,e5500@0 {
- ...
- clocks = <&mux0>;
- ...
- };
-};
--
1.7.1
Powered by blists - more mailing lists