| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CADRPPNS4brR5f3PiAujLQSy3kpniaR+pzKRn0LhBSSsawJ-vag@mail.gmail.com>
Date: Thu, 25 Oct 2018 14:49:16 -0500
From: Li Yang <leoyang.li@....com>
To: Vabhav Sharma <vabhav.sharma@....com>
Cc: Sudeep Holla <sudeep.holla@....com>, Scott Wood <oss@...error.net>,
lkml <linux-kernel@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linuxppc-dev <linuxppc-dev@...ts.ozlabs.org>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>,
Michael Turquette <mturquette@...libre.com>, sboyd@...nel.org,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Viresh Kumar <viresh.kumar@...aro.org>,
linux-clk <linux-clk@...r.kernel.org>, linux-pm@...r.kernel.org,
linux-kernel-owner@...r.kernel.org,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Arnd Bergmann <arnd@...db.de>,
Kate Stewart <kstewart@...uxfoundation.org>,
yamada.masahiro@...ionext.com, Shawn Guo <shawnguo@...nel.org>,
Russell King <linux@...linux.org.uk>,
Adrian Hunter <adrian.hunter@...el.com>,
Ulf Hansson <ulf.hansson@...aro.org>, V.Sethi@....com,
udit.kumar@....com, pankaj.bansal@....com,
Ramneek Mehresh <ramneek.mehresh@....com>,
Ying Zhang <ying.zhang22455@....com>, nipun.gupta@....com,
Priyanka Jain <priyanka.jain@....com>,
yogeshnarayan.gaur@....com, Sriram Dash <sriram.dash@....com>,
Horia Geanta <horia.geanta@....com>,
Ran Wang <ran.wang_1@....com>, Yinbo Zhu <yinbo.zhu@....com>
Subject: Re: [PATCH v6 5/6] arm64: dts: add QorIQ LX2160A SoC support
On Thu, Oct 25, 2018 at 2:03 AM Vabhav Sharma <vabhav.sharma@....com> wrote:
>
> LX2160A SoC is based on Layerscape Chassis Generation 3.2 Architecture.
>
> LX2160A features an advanced 16 64-bit ARM v8 CortexA72 processor cores
> in 8 cluster, CCN508, GICv3,two 64-bit DDR4 memory controller, 8 I2C
> controllers, 3 dspi, 2 esdhc,2 USB 3.0, mmu 500, 3 SATA, 4 PL011 SBSA
> UARTs etc.
>
> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@....com>
> Signed-off-by: Zhang Ying-22455 <ying.zhang22455@....com>
> Signed-off-by: Nipun Gupta <nipun.gupta@....com>
> Signed-off-by: Priyanka Jain <priyanka.jain@....com>
> Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@....com>
> Signed-off-by: Sriram Dash <sriram.dash@....com>
> Signed-off-by: Vabhav Sharma <vabhav.sharma@....com>
> Signed-off-by: Horia Geanta <horia.geanta@....com>
> Signed-off-by: Ran Wang <ran.wang_1@....com>
> Signed-off-by: Yinbo Zhu <yinbo.zhu@....com>
> ---
> arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 766 +++++++++++++++++++++++++
> 1 file changed, 766 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> new file mode 100644
> index 0000000..9fcfd48
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -0,0 +1,766 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +//
> +// Device Tree Include file for Layerscape-LX2160A family SoC.
> +//
> +// Copyright 2018 NXP
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/memreserve/ 0x80000000 0x00010000;
> +
> +/ {
> + compatible = "fsl,lx2160a";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + // 8 clusters having 2 Cortex-A72 cores each
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + enable-method = "psci";
> + reg = <0x0>;
> + clocks = <&clockgen 1 0>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + i-cache-size = <0xC000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <192>;
> + next-level-cache = <&cluster0_l2>;
> + };
> +
> + cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + enable-method = "psci";
> + reg = <0x1>;
> + clocks = <&clockgen 1 0>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + i-cache-size = <0xC000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <192>;
> + next-level-cache = <&cluster0_l2>;
> + };
> +
> + cpu@100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + enable-method = "psci";
> + reg = <0x100>;
> + clocks = <&clockgen 1 1>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + i-cache-size = <0xC000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <192>;
> + next-level-cache = <&cluster1_l2>;
> + };
> +
> + cpu@101 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + enable-method = "psci";
> + reg = <0x101>;
> + clocks = <&clockgen 1 1>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + i-cache-size = <0xC000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <192>;
> + next-level-cache = <&cluster1_l2>;
> + };
> +
> + cpu@200 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + enable-method = "psci";
> + reg = <0x200>;
> + clocks = <&clockgen 1 2>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + i-cache-size = <0xC000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <192>;
> + next-level-cache = <&cluster2_l2>;
> + };
> +
> + cpu@201 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + enable-method = "psci";
> + reg = <0x201>;
> + clocks = <&clockgen 1 2>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + i-cache-size = <0xC000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <192>;
> + next-level-cache = <&cluster2_l2>;
> + };
> +
> + cpu@300 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + enable-method = "psci";
> + reg = <0x300>;
> + clocks = <&clockgen 1 3>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + i-cache-size = <0xC000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <192>;
> + next-level-cache = <&cluster3_l2>;
> + };
> +
> + cpu@301 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + enable-method = "psci";
> + reg = <0x301>;
> + clocks = <&clockgen 1 3>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + i-cache-size = <0xC000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <192>;
> + next-level-cache = <&cluster3_l2>;
> + };
> +
> + cpu@400 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + enable-method = "psci";
> + reg = <0x400>;
> + clocks = <&clockgen 1 4>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + i-cache-size = <0xC000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <192>;
> + next-level-cache = <&cluster4_l2>;
> + };
> +
> + cpu@401 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + enable-method = "psci";
> + reg = <0x401>;
> + clocks = <&clockgen 1 4>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + i-cache-size = <0xC000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <192>;
> + next-level-cache = <&cluster4_l2>;
> + };
> +
> + cpu@500 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + enable-method = "psci";
> + reg = <0x500>;
> + clocks = <&clockgen 1 5>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + i-cache-size = <0xC000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <192>;
> + next-level-cache = <&cluster5_l2>;
> + };
> +
> + cpu@501 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + enable-method = "psci";
> + reg = <0x501>;
> + clocks = <&clockgen 1 5>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + i-cache-size = <0xC000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <192>;
> + next-level-cache = <&cluster5_l2>;
> + };
> +
> + cpu@600 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + enable-method = "psci";
> + reg = <0x600>;
> + clocks = <&clockgen 1 6>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + i-cache-size = <0xC000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <192>;
> + next-level-cache = <&cluster6_l2>;
> + };
> +
> + cpu@601 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + enable-method = "psci";
> + reg = <0x601>;
> + clocks = <&clockgen 1 6>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + i-cache-size = <0xC000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <192>;
> + next-level-cache = <&cluster6_l2>;
> + };
> +
> + cpu@700 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + enable-method = "psci";
> + reg = <0x700>;
> + clocks = <&clockgen 1 7>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + i-cache-size = <0xC000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <192>;
> + next-level-cache = <&cluster7_l2>;
> + };
> +
> + cpu@701 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + enable-method = "psci";
> + reg = <0x701>;
> + clocks = <&clockgen 1 7>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + i-cache-size = <0xC000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <192>;
> + next-level-cache = <&cluster7_l2>;
> + };
> +
> + cluster0_l2: l2-cache0 {
> + compatible = "cache";
> + cache-size = <0x100000>;
> + cache-line-size = <64>;
> + cache-sets = <1024>;
> + cache-level = <2>;
> + };
> +
> + cluster1_l2: l2-cache1 {
> + compatible = "cache";
> + cache-size = <0x100000>;
> + cache-line-size = <64>;
> + cache-sets = <1024>;
> + cache-level = <2>;
> + };
> +
> + cluster2_l2: l2-cache2 {
> + compatible = "cache";
> + cache-size = <0x100000>;
> + cache-line-size = <64>;
> + cache-sets = <1024>;
> + cache-level = <2>;
> + };
> +
> + cluster3_l2: l2-cache3 {
> + compatible = "cache";
> + cache-size = <0x100000>;
> + cache-line-size = <64>;
> + cache-sets = <1024>;
> + cache-level = <2>;
> + };
> +
> + cluster4_l2: l2-cache4 {
> + compatible = "cache";
> + cache-size = <0x100000>;
> + cache-line-size = <64>;
> + cache-sets = <1024>;
> + cache-level = <2>;
> + };
> +
> + cluster5_l2: l2-cache5 {
> + compatible = "cache";
> + cache-size = <0x100000>;
> + cache-line-size = <64>;
> + cache-sets = <1024>;
> + cache-level = <2>;
> + };
> +
> + cluster6_l2: l2-cache6 {
> + compatible = "cache";
> + cache-size = <0x100000>;
> + cache-line-size = <64>;
> + cache-sets = <1024>;
> + cache-level = <2>;
> + };
> +
> + cluster7_l2: l2-cache7 {
> + compatible = "cache";
> + cache-size = <0x100000>;
> + cache-line-size = <64>;
> + cache-sets = <1024>;
> + cache-level = <2>;
> + };
> + };
> +
> + gic: interrupt-controller@...0000 {
> + compatible = "arm,gic-v3";
> + reg = <0x0 0x06000000 0 0x10000>, // GIC Dist
> + <0x0 0x06200000 0 0x200000>, // GICR (RD_base +
> + // SGI_base)
> + <0x0 0x0c0c0000 0 0x2000>, // GICC
> + <0x0 0x0c0d0000 0 0x1000>, // GICH
> + <0x0 0x0c0e0000 0 0x20000>; // GICV
> + #interrupt-cells = <3>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + interrupt-controller;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +
> + its: gic-its@...0000 {
> + compatible = "arm,gic-v3-its";
> + msi-controller;
> + reg = <0x0 0x6020000 0 0x20000>;
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + pmu {
> + compatible = "arm,cortex-a72-pmu";
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + };
> +
> + memory@...00000 {
> + // DRAM space - 1, size : 2 GB DRAM
> + device_type = "memory";
> + reg = <0x00000000 0x80000000 0 0x80000000>;
> + };
> +
> + ddr1: memory-controller@...0000 {
> + compatible = "fsl,qoriq-memory-controller";
> + reg = <0x0 0x1080000 0x0 0x1000>;
> + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> + little-endian;
> + };
> +
> + ddr2: memory-controller@...0000 {
> + compatible = "fsl,qoriq-memory-controller";
> + reg = <0x0 0x1090000 0x0 0x1000>;
> + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> + little-endian;
> + };
> +
> + // One clock unit-sysclk node which bootloader require during DT fix-up
> + sysclk: sysclk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <100000000>;
Would be even better if you can add a comment "fixed up by bootloader"
to the property too.
> + clock-output-names = "sysclk";
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + crypto: crypto@...0000 {
> + compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
> + fsl,sec-era = <10>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x00 0x8000000 0x100000>;
> + reg = <0x00 0x8000000 0x0 0x100000>;
> + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> + dma-coherent;
> + status = "disabled";
> +
> + sec_jr0: jr@...00 {
> + compatible = "fsl,sec-v5.0-job-ring",
> + "fsl,sec-v4.0-job-ring";
> + reg = <0x10000 0x10000>;
> + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + sec_jr1: jr@...00 {
> + compatible = "fsl,sec-v5.0-job-ring",
> + "fsl,sec-v4.0-job-ring";
> + reg = <0x20000 0x10000>;
> + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + sec_jr2: jr@...00 {
> + compatible = "fsl,sec-v5.0-job-ring",
> + "fsl,sec-v4.0-job-ring";
> + reg = <0x30000 0x10000>;
> + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + sec_jr3: jr@...00 {
> + compatible = "fsl,sec-v5.0-job-ring",
> + "fsl,sec-v4.0-job-ring";
> + reg = <0x40000 0x10000>;
> + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + clockgen: clock-controller@...0000 {
> + compatible = "fsl,lx2160a-clockgen";
> + reg = <0 0x1300000 0 0xa0000>;
> + #clock-cells = <2>;
> + clocks = <&sysclk>;
> + };
> +
> + dcfg: syscon@...0000 {
> + compatible = "fsl,lx2160a-dcfg", "syscon";
> + reg = <0x0 0x1e00000 0x0 0x10000>;
> + little-endian;
> + };
> +
> + i2c0: i2c@...0000 {
> + compatible = "fsl,vf610-i2c";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0 0x2000000 0x0 0x10000>;
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "i2c";
> + clocks = <&clockgen 4 7>;
> + scl-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@...0000 {
> + compatible = "fsl,vf610-i2c";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0 0x2010000 0x0 0x10000>;
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "i2c";
> + clocks = <&clockgen 4 7>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@...0000 {
> + compatible = "fsl,vf610-i2c";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0 0x2020000 0x0 0x10000>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "i2c";
> + clocks = <&clockgen 4 7>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c@...0000 {
> + compatible = "fsl,vf610-i2c";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0 0x2030000 0x0 0x10000>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "i2c";
> + clocks = <&clockgen 4 7>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c@...0000 {
> + compatible = "fsl,vf610-i2c";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0 0x2040000 0x0 0x10000>;
> + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "i2c";
> + clocks = <&clockgen 4 7>;
> + scl-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;
> + status = "disabled";
> + };
> +
> + i2c5: i2c@...0000 {
> + compatible = "fsl,vf610-i2c";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0 0x2050000 0x0 0x10000>;
> + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "i2c";
> + clocks = <&clockgen 4 7>;
> + status = "disabled";
> + };
> +
> + i2c6: i2c@...0000 {
> + compatible = "fsl,vf610-i2c";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0 0x2060000 0x0 0x10000>;
> + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "i2c";
> + clocks = <&clockgen 4 7>;
> + status = "disabled";
> + };
> +
> + i2c7: i2c@...0000 {
> + compatible = "fsl,vf610-i2c";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0 0x2070000 0x0 0x10000>;
> + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "i2c";
> + clocks = <&clockgen 4 7>;
> + status = "disabled";
> + };
> +
> + esdhc0: esdhc@...0000 {
> + compatible = "fsl,esdhc";
> + reg = <0x0 0x2140000 0x0 0x10000>;
> + interrupts = <0 28 0x4>; /* Level high type */
> + clocks = <&clockgen 4 1>;
> + voltage-ranges = <1800 1800 3300 3300>;
> + sdhci,auto-cmd12;
> + little-endian;
> + bus-width = <4>;
> + status = "disabled";
> + };
> +
> + esdhc1: esdhc@...0000 {
> + compatible = "fsl,esdhc";
> + reg = <0x0 0x2150000 0x0 0x10000>;
> + interrupts = <0 63 0x4>; /* Level high type */
> + clocks = <&clockgen 4 1>;
> + voltage-ranges = <1800 1800 3300 3300>;
> + sdhci,auto-cmd12;
> + broken-cd;
> + little-endian;
> + bus-width = <4>;
> + status = "disabled";
> + };
> +
> + uart0: serial@...0000 {
> + compatible = "arm,sbsa-uart","arm,pl011";
> + reg = <0x0 0x21c0000 0x0 0x1000>;
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> + current-speed = <115200>;
> + status = "disabled";
> + };
> +
> + uart1: serial@...0000 {
> + compatible = "arm,sbsa-uart","arm,pl011";
> + reg = <0x0 0x21d0000 0x0 0x1000>;
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> + current-speed = <115200>;
> + status = "disabled";
> + };
> +
> + uart2: serial@...0000 {
> + compatible = "arm,sbsa-uart","arm,pl011";
> + reg = <0x0 0x21e0000 0x0 0x1000>;
> + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
> + current-speed = <115200>;
> + status = "disabled";
> + };
> +
> + uart3: serial@...0000 {
> + compatible = "arm,sbsa-uart","arm,pl011";
> + reg = <0x0 0x21f0000 0x0 0x1000>;
> + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
> + current-speed = <115200>;
> + status = "disabled";
> + };
> +
> + gpio0: gpio@...0000 {
> + compatible = "fsl,qoriq-gpio";
> + reg = <0x0 0x2300000 0x0 0x10000>;
> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + little-endian;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio1: gpio@...0000 {
> + compatible = "fsl,qoriq-gpio";
> + reg = <0x0 0x2310000 0x0 0x10000>;
> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + little-endian;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio2: gpio@...0000 {
> + compatible = "fsl,qoriq-gpio";
> + reg = <0x0 0x2320000 0x0 0x10000>;
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + little-endian;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio3: gpio@...0000 {
> + compatible = "fsl,qoriq-gpio";
> + reg = <0x0 0x2330000 0x0 0x10000>;
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + little-endian;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + watchdog@...0000 {
> + compatible = "arm,sbsa-gwdt";
> + reg = <0x0 0x23a0000 0 0x1000>,
> + <0x0 0x2390000 0 0x1000>;
> + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
> + timeout-sec = <30>;
> + };
> +
> + usb0: usb@...0000 {
> + compatible = "snps,dwc3";
> + reg = <0x0 0x3100000 0x0 0x10000>;
> + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> + dr_mode = "host";
> + snps,quirk-frame-length-adjustment = <0x20>;
> + snps,dis_rxdet_inp3_quirk;
> + status = "disabled";
> + };
> +
> + usb1: usb@...0000 {
> + compatible = "snps,dwc3";
> + reg = <0x0 0x3110000 0x0 0x10000>;
> + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
> + dr_mode = "host";
> + snps,quirk-frame-length-adjustment = <0x20>;
> + snps,dis_rxdet_inp3_quirk;
> + status = "disabled";
> + };
> +
> + smmu: iommu@...0000 {
> + compatible = "arm,mmu-500";
> + reg = <0 0x5000000 0 0x800000>;
> + #iommu-cells = <1>;
> + #global-interrupts = <14>;
> + // global secure fault
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
> + // combined secure
> + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
> + // global non-secure fault
> + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
> + // combined non-secure
> + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
> + // performance counter interrupts 0-9
> + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
> + // per context interrupt, 64 interrupts
> + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
> + dma-coherent;
> + };
> + };
> +};
> --
> 2.7.4
>
Powered by blists - more mailing lists