linux-kernel - Re: [PATCH 1/3] dt-bindings: new binding for Himax HX8357D display panels

Open Source and information security mailing list archives

Message-ID: <20181025214234.GA5036@bogus>
Date:   Thu, 25 Oct 2018 16:42:34 -0500
From:   Rob Herring <robh@...nel.org>
To:     Eric Anholt <eric@...olt.net>
Cc:     dri-devel@...ts.freedesktop.org,
        Noralf Trønnes <noralf@...nnes.org>,
        Mark Rutland <mark.rutland@....com>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Heiner Kallweit <hkallweit1@...il.com>
Subject: Re: [PATCH 1/3] dt-bindings: new binding for Himax HX8357D display
 panels

On Wed, Oct 24, 2018 at 11:43:11AM -0700, Eric Anholt wrote:
> This adds a new binding for Himax HX8357D display panels. It includes
> a compatible string for one display (more can be added in the future).
> 
> The YX350HV15 panel[1] is found in the Adafruit PiTFT 3.5" Touch
> Screen for Raspberry Pi.
> 
> [1] https://learn.adafruit.com/adafruit-pitft-3-dot-5-touch-screen-for-raspberry-pi/downloads
> 
> This binding is closely modeled after the ili9341 binding, for a
> similar product from adafruit.  The primary difference is that the
> hx8367d doesn't have a reset line that I can find in the schematics.
> 
> Signed-off-by: Eric Anholt <eric@...olt.net>
> ---
>  .../bindings/display/himax,hx8357d.txt        | 25 +++++++++++++++++++
>  1 file changed, 25 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/himax,hx8357d.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/himax,hx8357d.txt b/Documentation/devicetree/bindings/display/himax,hx8357d.txt
> new file mode 100644
> index 000000000000..48586e570be0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/himax,hx8357d.txt
> @@ -0,0 +1,25 @@
> +Himax HX8357D display panels
> +
> +This binding is for display panels using a Himax HX8357D controller in SPI
> +mode, such as the Adafruit 3.5" TFT for Raspberry Pi.
> +
> +Required properties:
> +- compatible:	"adafruit,yx350hv15", "himax,hx8357d"
> +- dc-gpios:	D/C pin

You forgot reg. Otherwise,

Reviewed-by: Rob Herring <robh@...nel.org>

> +
> +The node for this driver must be a child node of a SPI controller, hence
> +all mandatory properties described in ../spi/spi-bus.txt must be specified.
> +
> +Optional properties:
> +- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
> +- backlight:	phandle of the backlight device attached to the panel
> +
> +Example:
> +	display@0{
> +		compatible = "adafruit,yx350hv15", "himax,hx8357d";
> +		reg = <0>;
> +		spi-max-frequency = <32000000>;
> +		dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
> +		rotation = <90>;
> +		backlight = <&backlight>;
> +	};
> -- 
> 2.19.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@...ts.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives