lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181025141853.214051-40-sashal@kernel.org>
Date:   Thu, 25 Oct 2018 10:17:55 -0400
From:   Sasha Levin <sashal@...nel.org>
To:     stable@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Wenyou Yang <wenyou.yang@...el.com>,
        Nicolas Ferre <nicolas.ferre@...el.com>,
        Sasha Levin <sashal@...nel.org>
Subject: [PATCH AUTOSEL 3.18 40/98] ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree

From: Wenyou Yang <wenyou.yang@...el.com>

[ Upstream commit b8659752c37ec157ee254cff443b1c9d523aea22 ]

Appearance: On some SAMA5D4EK boards, after power up, the Eth1 doesn't work.

Reason: The PIOE2 pin is connected to the NAND_Tree# of KSZ8081,
But it outputs LOW during the reset period, which cause the NAND_Tree# enabled.

Add phy_fixup() to disable NAND_Tree by overriding the Operation
Mode Strap Override register(i.e. Register 16h) to clear the NAND_Tree bit.

Signed-off-by: Wenyou Yang <wenyou.yang@...el.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@...el.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 arch/arm/mach-at91/board-dt-sama5.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
index 129e2917506b..5e4cedfa5c51 100644
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ b/arch/arm/mach-at91/board-dt-sama5.c
@@ -17,6 +17,7 @@
 #include <linux/of_platform.h>
 #include <linux/phy.h>
 #include <linux/clk-provider.h>
+#include <linux/phy.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -27,8 +28,25 @@
 #include "at91_aic.h"
 #include "generic.h"
 
+static int ksz8081_phy_fixup(struct phy_device *phy)
+{
+	int value;
+
+	value = phy_read(phy, 0x16);
+	value &= ~0x20;
+	phy_write(phy, 0x16, value);
+
+	return 0;
+}
+
 static void __init sama5_dt_device_init(void)
 {
+	if (of_machine_is_compatible("atmel,sama5d4ek") &&
+	   IS_ENABLED(CONFIG_PHYLIB)) {
+		phy_register_fixup_for_id("fc028000.etherne:00",
+						ksz8081_phy_fixup);
+	}
+
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ