[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3E73AB92-AFD7-4DA6-AF42-725B894DE114@aosc.io>
Date: Fri, 26 Oct 2018 08:08:43 +0800
From: Icenowy Zheng <icenowy@...c.io>
To: linux-arm-kernel@...ts.infradead.org, Rob Herring <robh@...nel.org>
CC: devicetree@...r.kernel.org, Archit Taneja <architt@...eaurora.org>,
David Airlie <airlied@...ux.ie>, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org,
Andrzej Hajda <a.hajda@...sung.com>,
linux-sunxi@...glegroups.com,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Maxime Ripard <maxime.ripard@...tlin.com>,
Chen-Yu Tsai <wens@...e.org>
Subject: Re: [PATCH 4/9] dt-bindings: Add ANX6345 DP/eDP transmitter binding
于 2018年10月26日 GMT+08:00 上午2:30:03, Rob Herring <robh@...nel.org> 写到:
>On Thu, Oct 18, 2018 at 08:40:11PM +0800, Icenowy Zheng wrote:
>> 在 2018-10-18四的 14:23 +0300,Laurent Pinchart写道:
>> > Hi Icenowy,
>> >
>> > On Thursday, 18 October 2018 13:00:05 EEST Icenowy Zheng wrote:
>> > > 在 2018-10-18四的 11:53 +0300,Laurent Pinchart写道:
>> > > > On Thursday, 18 October 2018 10:33:22 EEST Icenowy Zheng wrote:
>> > > > > The ANX6345 is an ultra-low power DisplayPort/eDP transmitter
>> > > > > designed
>> > > > > for portable devices.
>> > > > >
>> > > > > Add a binding document for it.
>> > > > >
>> > > > > Signed-off-by: Icenowy Zheng <icenowy@...c.io>
>> > > > > ---
>> > > > >
>> > > > > .../bindings/display/bridge/anx6345.txt | 39
>> > > > > +++++++++++++++++++
>> > > > >
>> > > > > 1 file changed, 39 insertions(+)
>> > > > > create mode 100644
>> > > > >
>> > > > > Documentation/devicetree/bindings/display/bridge/anx6345.txt
>> > > > >
>> > > > > diff --git
>> > > > >
>a/Documentation/devicetree/bindings/display/bridge/anx6345.txt
>> > > > >
>b/Documentation/devicetree/bindings/display/bridge/anx6345.txt
>> > > > > new
>> > > > > file
>> > > > > mode 100644
>> > > > > index 000000000000..0689d4eb5f65
>> > > > > --- /dev/null
>> > > > > +++
>> > > > >
>b/Documentation/devicetree/bindings/display/bridge/anx6345.txt
>> > > > > @@ -0,0 +1,39 @@
>> > > > > +Analogix ANX6345 eDP Transmitter
>> > > > > +--------------------------------
>> > > > > +
>> > > > > +The ANX6345 is an ultra-low power Full-HD eDP transmitter
>> > > > > designed
>> > > > > for
>> > > > > +portable devices.
>> > > > > +
>> > > > > +Required properties:
>> > > > > +
>> > > > > + - compatible : "analogix,anx6345"
>> > > > > + - reg : I2C address of the device
>> > > > > + - reset-gpios : Which GPIO to use for reset
>> > > > > +
>> > > > > +Optional properties:
>> > > > > +
>> > > > > + - dvdd12-supply : Regulator for 1.2V digital core
>> > > > > power.
>> > > > > + - dvdd25-supply : Regulator for 2.5V digital core
>> > > > > power.
>> > > >
>> > > > Shouldn't these to supplies be mandatory ?
>> > >
>> > > Yes they should.
>> > >
>> > > > > + - panel-supply : Regulator for the power of
>> > > > > the panel.
>> > > >
>> > > > Shouldn't the panel supply for specified in the DT node of the
>> > > > panel
>> > > > ?
>> > >
>> > > However, eDP panel can be probed, may vary on the same device,
>and
>> > > we
>> > > don't have a generic binding for it...
>> >
>> > Shouldn't we fix that ? :-)
>>
>> Maybe we should create a connector binding instead of a panel
>binding?
>
>There's not any such thing as a standard eDP connector, is there?
>Otherwise, that's just creating a generic panel binding in disguise.
>Maybe if eDP interface is standardized enough in terms of power
>control,
>control lines, EDID at least sometimes present, etc., then we could
eDP has the same display signal set with DP, including AUX which
carries DPCD and EDID (if present).
But I don't know whether other lines are standardized, including power, backlight, etc.
>have
>some sort of generic eDP panel/connector binding.
>
>Rob
>
>_______________________________________________
>linux-arm-kernel mailing list
>linux-arm-kernel@...ts.infradead.org
>http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Powered by blists - more mailing lists