linux-kernel - [PATCH v3 5/7] arm64: dts: hisilicon: poplar: Standardize LED labels and triggers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 29 Oct 2018 15:12:43 +0530
From:   Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To:     robh@...nel.org, heiko@...ech.de, ezequiel@...labora.com,
        xuwei5@...ilicon.com, michal.simek@...inx.com, pavel@....cz,
        andy.gross@...aro.org
Cc:     linux-leds@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-rockchip@...ts.infradead.org, linux-arm-msm@...r.kernel.org,
        linux-soc@...r.kernel.org, daniel.thompson@...aro.org,
        amit.kucheria@...aro.org, linus.walleij@...aro.org,
        koen.kooi@...aro.org, nicolas.dechesne@...aro.org,
        Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH v3 5/7] arm64: dts: hisilicon: poplar: Standardize LED labels and triggers

For all 96Boards, the following standard is used for onboard LEDs.

green:user1  default-trigger: heartbeat
green:user2  default-trigger: mmc0/disk-activity(onboard-storage)
green:user3  default-trigger: mmc1 (SD-card)
green:user4  default-trigger: none, panic-indicator
yellow:wlan  default-trigger: phy0tx
blue:bt      default-trigger: hci0-power

So lets adopt the same for Poplar, which is one of the 96Boards
Enterprise edition platform.

Due to absence of WLAN and BT support, corresponding LED nodes are not
considered.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
 .../arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
index d30f6eb8a5ee..32716c96b457 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
@@ -35,30 +35,31 @@
 		compatible = "gpio-leds";
 
 		user-led0 {
-			label = "USER-LED0";
+			label = "green:user1";
 			gpios = <&gpio6 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
 		user-led1 {
-			label = "USER-LED1";
+			label = "green:user2";
 			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
 		user-led2 {
-			label = "USER-LED2";
+			label = "green:user3";
 			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
+			linux,default-trigger = "mmc1";
 			default-state = "off";
 		};
 
 		user-led3 {
-			label = "USER-LED3";
+			label = "green:user4";
 			gpios = <&gpio10 6 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "cpu0";
+			linux,default-trigger = "none";
+			panic-indicator;
 			default-state = "off";
 		};
 	};
-- 
2.17.1