linux-kernel - Re: [PATCH v3 12/25] drm/sun4i: sun6i_mipi

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAMty3ZBHU5eXRLLJmUroLgSKcF6O9gHOHRM1XBnt9_Lp7B8rEA@mail.gmail.com>
Date:   Mon, 29 Oct 2018 19:56:27 +0530
From:   Jagan Teki <jagan@...rulasolutions.com>
To:     Maxime Ripard <maxime.ripard@...tlin.com>
Cc:     Chen-Yu Tsai <wens@...e.org>, Icenowy Zheng <icenowy@...c.io>,
        Jernej Skrabec <jernej.skrabec@...l.net>,
        Vasily Khoruzhick <anarsoul@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will.deacon@....com>,
        David Airlie <airlied@...ux.ie>,
        dri-devel <dri-devel@...ts.freedesktop.org>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        linux-clk <linux-clk@...r.kernel.org>,
        Michael Trimarchi <michael@...rulasolutions.com>,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
        devicetree <devicetree@...r.kernel.org>,
        linux-kernel <linux-kernel@...r.kernel.org>,
        linux-sunxi@...glegroups.com
Subject: Re: [PATCH v3 12/25] drm/sun4i: sun6i_mipi_dsi: Add DSI hblk packet overhead

On Mon, Oct 29, 2018 at 2:52 PM Maxime Ripard <maxime.ripard@...tlin.com> wrote:
>
> On Fri, Oct 26, 2018 at 08:13:31PM +0530, Jagan Teki wrote:
> > Add 10 bytes packet overhead for hblk where blank is set using
> > a blanking packet like (4 bytes + 4 bytes + payload + 2 bytes)
> >
> > This is according to BSP code from BPI-M64-bsp
> > (in drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)
> > dsi_hblk = (ht-hspw)*dsi_pixel_bits[format]/8-(4+4+2);
> >
> > So, add 10 bytes packet overhead for DSI hblk.
> >
> > Tested on 2-lane, 4-lane MIPI-DSI LCD panels.
> >
> > Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
> > Tested-by: Jagan Teki <jagan@...rulasolutions.com>
> > ---
> > Changes for v3:
> > - new patch
> > Changes for v2:
> > - none
> >
> >  drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 9 +++++++--
> >  1 file changed, 7 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > index 596e560263bf..cf42be1f1ba1 100644
> > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > @@ -461,7 +461,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
> >  {
> >       struct mipi_dsi_device *device = dsi->device;
> >       unsigned int Bpp = mipi_dsi_pixel_format_to_bpp(device->format) / 8;
> > -     u16 hbp, hfp, hsa, hblk, vblk;
> > +     u16 hbp, hfp, hsa, hblk_max, hblk, vblk;
> >       size_t bytes;
> >       u8 *buffer;
> >
> > @@ -494,8 +494,13 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
> >
> >       /*
> >        * hblk seems to be the line + porches length.
> > +      * The blank is set using a blanking packet (4 bytes + 4 bytes +
> > +      * payload + 2 bytes). So minimal size is 10 bytes
> >        */
> > -     hblk = (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp;
> > +#define HBLK_PACKET_OVERHEAD 10
> > +     hblk_max = (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp;
> > +     hblk_max -= HBLK_PACKET_OVERHEAD;
> > +     hblk = max((unsigned int)HBLK_PACKET_OVERHEAD, hblk_max);
>
> I'd rather use the same convention than the other assignments done
> before in that function.

Yes, old code did use hsa. but it's added 10 bytes packet head instead
of subtracting it.

hblk = mode->htotal * Bpp - hsa;
=> mode->htotal * Bpp - (mode->hsync_end - mode->hsync_start) * Bpp -
HSA_PACKET_OVERHEAD);
=> (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp +
HSA_PACKET_OVERHEAD;

And it should be
(mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp -
HSA_PACKET_OVERHEAD;

This patch is simply doing the same by explicitly adding packet over
ahead macro, which again used in hfp.