linux-kernel - [PATCH AUTOSEL 3.18 14/22] scsi: esp_scsi: Track residual for PIO transfers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181031231206.29509-14-sashal@kernel.org>
Date:   Wed, 31 Oct 2018 19:11:58 -0400
From:   Sasha Levin <sashal@...nel.org>
To:     stable@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Finn Thain <fthain@...egraphics.com.au>,
        "Martin K . Petersen" <martin.petersen@...cle.com>,
        Sasha Levin <sashal@...nel.org>
Subject: [PATCH AUTOSEL 3.18 14/22] scsi: esp_scsi: Track residual for PIO transfers

From: Finn Thain <fthain@...egraphics.com.au>

[ Upstream commit fd47d919d0c336e7c22862b51ee94927ffea227a ]

If a target disconnects during a PIO data transfer the command may fail
when the target reconnects:

scsi host1: DMA length is zero!
scsi host1: cur adr[04380000] len[00000000]

The scsi bus is then reset. This happens because the residual reached
zero before the transfer was completed.

The usual residual calculation relies on the Transfer Count registers.
That works for DMA transfers but not for PIO transfers. Fix the problem
by storing the PIO transfer residual and using that to correctly
calculate bytes_sent.

Fixes: 6fe07aaffbf0 ("[SCSI] m68k: new mac_esp scsi driver")
Tested-by: Stan Johnson <userm57@...oo.com>
Signed-off-by: Finn Thain <fthain@...egraphics.com.au>
Tested-by: Michael Schmitz <schmitzmic@...il.com>
Signed-off-by: Martin K. Petersen <martin.petersen@...cle.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/scsi/esp_scsi.c | 1 +
 drivers/scsi/esp_scsi.h | 2 ++
 drivers/scsi/mac_esp.c  | 2 ++
 3 files changed, 5 insertions(+)

diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index 55548dc5cec3..cc674370b4b0 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -1316,6 +1316,7 @@ static int esp_data_bytes_sent(struct esp *esp, struct esp_cmd_entry *ent,
 
 	bytes_sent = esp->data_dma_len;
 	bytes_sent -= ecount;
+	bytes_sent -= esp->send_cmd_residual;
 
 	if (!(ent->flags & ESP_CMD_FLAG_WRITE))
 		bytes_sent -= fifo_cnt;
diff --git a/drivers/scsi/esp_scsi.h b/drivers/scsi/esp_scsi.h
index cd68805e8d78..20b229b53639 100644
--- a/drivers/scsi/esp_scsi.h
+++ b/drivers/scsi/esp_scsi.h
@@ -524,6 +524,8 @@ struct esp {
 
 	void			*dma;
 	int			dmarev;
+
+	u32			send_cmd_residual;
 };
 
 /* A front-end driver for the ESP chip should do the following in
diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c
index 79fb6a4f661f..ec9d1a7f3dad 100644
--- a/drivers/scsi/mac_esp.c
+++ b/drivers/scsi/mac_esp.c
@@ -426,6 +426,8 @@ static void mac_esp_send_pio_cmd(struct esp *esp, u32 addr, u32 esp_count,
 			scsi_esp_cmd(esp, ESP_CMD_TI);
 		}
 	}
+
+	esp->send_cmd_residual = esp_count;
 }
 
 static int mac_esp_irq_pending(struct esp *esp)
-- 
2.17.1