[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181031194425.32132-3-TheSven73@googlemail.com>
Date: Wed, 31 Oct 2018 15:44:22 -0400
From: thesven73@...il.com
To: svendev@...x.com, lee.jones@...aro.org, robh+dt@...nel.org,
mark.rutland@....com, afaerber@...e.de, treding@...dia.com,
david@...hnology.com, noralf@...nnes.org, johan@...nel.org,
monstr@...str.eu, michal.vokac@...ft.com, arnd@...db.de,
gregkh@...uxfoundation.org, john.garry@...wei.com,
geert+renesas@...der.be, robin.murphy@....com,
paul.gortmaker@...driver.com,
sebastien.bourdelin@...oirfairelinux.com, icenowy@...c.io,
stuyoder@...il.com, linus.walleij@...aro.org,
maxime.ripard@...tlin.com
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: [PATCH anybus v2 2/5] dt-bindings: anybus-bridge: document devicetree binding.
From: Sven Van Asbroeck <svendev@...x.com>
This patch adds devicetree binding documentation for the
Arcx anybus bridge.
Signed-off-by: Sven Van Asbroeck <svendev@...x.com>
---
.../bindings/misc/arcx,anybus-bridge.txt | 34 +++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
2 files changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/arcx,anybus-bridge.txt
diff --git a/Documentation/devicetree/bindings/misc/arcx,anybus-bridge.txt b/Documentation/devicetree/bindings/misc/arcx,anybus-bridge.txt
new file mode 100644
index 000000000000..cb801b7568b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/arcx,anybus-bridge.txt
@@ -0,0 +1,34 @@
+* Arcx anybus bridge
+
+This chip communicates with the SoC over a parallel bus. It is
+expected that its Device Tree node is specified as the child of a node
+corresponding to the parallel bus used for communication.
+
+Required properties:
+
+ - compatible : The following chip-specific string:
+ "arcx,anybus-bridge"
+
+ - reg : bus memory area where the cpld registers are located.
+
+ - reset-gpios : the GPIO pin connected to the reset line of the bridge.
+
+ - #reset-cells : Must be 1.
+ this bridge is a reset provider to its two embedded Anybus-S slots.
+
+Example of usage:
+
+This example places the bridge on top of the i.MX WEIM parallel bus, see:
+Documentation/devicetree/bindings/bus/imx-weim.txt
+
+&weim {
+ anybus_bridge: bridge@0,0 {
+ compatible = "arcx,anybus-bridge";
+ reg = <0 0 0x100>;
+ reset-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ #reset-cells = <1>;
+ /* fsl,weim-cs-timing is a i.MX WEIM bus specific property */
+ fsl,weim-cs-timing = <0x024400b1 0x00001010 0x20081100
+ 0x00000000 0xa0000240 0x00000000>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 2c3fc512e746..1bf07b20a8af 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -35,6 +35,7 @@ aptina Aptina Imaging
arasan Arasan Chip Systems
archermind ArcherMind Technology (Nanjing) Co., Ltd.
arctic Arctic Sand
+arcx Arcx/Archronix Inc.
aries Aries Embedded GmbH
arm ARM Ltd.
armadeus ARMadeus Systems SARL
--
2.17.1
Powered by blists - more mailing lists