lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20181102232946.98461-7-namit@vmware.com>
Date:   Fri, 2 Nov 2018 16:29:45 -0700
From:   Nadav Amit <namit@...are.com>
To:     Ingo Molnar <mingo@...hat.com>
CC:     <linux-kernel@...r.kernel.org>, <x86@...nel.org>,
        "H. Peter Anvin" <hpa@...or.com>,
        Thomas Gleixner <tglx@...utronix.de>,
        Borislav Petkov <bp@...en8.de>,
        Dave Hansen <dave.hansen@...ux.intel.com>,
        Nadav Amit <namit@...are.com>,
        Andy Lutomirski <luto@...nel.org>,
        Kees Cook <keescook@...omium.org>,
        Peter Zijlstra <peterz@...radead.org>,
        Dave Hansen <dave.hansen@...el.com>,
        Masami Hiramatsu <mhiramat@...nel.org>
Subject: [PATCH v3 6/7] x86/alternatives: use temporary mm for text poking

text_poke() can potentially compromise the security as it sets temporary
PTEs in the fixmap. These PTEs might be used to rewrite the kernel code
from other cores accidentally or maliciously, if an attacker gains the
ability to write onto kernel memory.

Moreover, since remote TLBs are not flushed after the temporary PTEs are
removed, the time-window in which the code is writable is not limited if
the fixmap PTEs - maliciously or accidentally - are cached in the TLB.
To address these potential security hazards, we use a temporary mm for
patching the code.

More adventurous developers can try to reorder the init sequence or use
text_poke_early() instead of text_poke() to remove the use of fixmap for
patching completely.

Finally, text_poke() is also not conservative enough when mapping pages,
as it always tries to map 2 pages, even when a single one is sufficient.
So try to be more conservative, and do not map more than needed.

Cc: Andy Lutomirski <luto@...nel.org>
Cc: Kees Cook <keescook@...omium.org>
Cc: Peter Zijlstra <peterz@...radead.org>
Cc: Dave Hansen <dave.hansen@...el.com>
Cc: Masami Hiramatsu <mhiramat@...nel.org>
Signed-off-by: Nadav Amit <namit@...are.com>
---
 arch/x86/include/asm/fixmap.h |   2 -
 arch/x86/kernel/alternative.c | 112 +++++++++++++++++++++++++++-------
 2 files changed, 91 insertions(+), 23 deletions(-)

diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 50ba74a34a37..9da8cccdf3fb 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -103,8 +103,6 @@ enum fixed_addresses {
 #ifdef CONFIG_PARAVIRT
 	FIX_PARAVIRT_BOOTMAP,
 #endif
-	FIX_TEXT_POKE1,	/* reserve 2 pages for text_poke() */
-	FIX_TEXT_POKE0, /* first page is last, because allocation is backward */
 #ifdef	CONFIG_X86_INTEL_MID
 	FIX_LNW_VRTC,
 #endif
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 9ceae28db1af..1a40df4db450 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -11,6 +11,7 @@
 #include <linux/stop_machine.h>
 #include <linux/slab.h>
 #include <linux/kdebug.h>
+#include <linux/mmu_context.h>
 #include <asm/text-patching.h>
 #include <asm/alternative.h>
 #include <asm/sections.h>
@@ -699,41 +700,110 @@ __ro_after_init unsigned long poking_addr;
  */
 void *text_poke(void *addr, const void *opcode, size_t len)
 {
-	unsigned long flags;
-	char *vaddr;
+	bool cross_page_boundary = offset_in_page(addr) + len > PAGE_SIZE;
+	temporary_mm_state_t prev;
 	struct page *pages[2];
-	int i;
+	unsigned long flags;
+	pte_t pte, *ptep;
+	spinlock_t *ptl;
 
 	/*
-	 * While boot memory allocator is runnig we cannot use struct
-	 * pages as they are not yet initialized.
+	 * While boot memory allocator is running we cannot use struct pages as
+	 * they are not yet initialized.
 	 */
 	BUG_ON(!after_bootmem);
 
 	if (!core_kernel_text((unsigned long)addr)) {
 		pages[0] = vmalloc_to_page(addr);
-		pages[1] = vmalloc_to_page(addr + PAGE_SIZE);
+		if (cross_page_boundary)
+			pages[1] = vmalloc_to_page(addr + PAGE_SIZE);
 	} else {
 		pages[0] = virt_to_page(addr);
 		WARN_ON(!PageReserved(pages[0]));
-		pages[1] = virt_to_page(addr + PAGE_SIZE);
+		if (cross_page_boundary)
+			pages[1] = virt_to_page(addr + PAGE_SIZE);
 	}
+
+	/* TODO: let the caller deal with a failure and fail gracefully. */
 	BUG_ON(!pages[0]);
+	BUG_ON(cross_page_boundary && !pages[1]);
 	local_irq_save(flags);
-	set_fixmap(FIX_TEXT_POKE0, page_to_phys(pages[0]));
-	if (pages[1])
-		set_fixmap(FIX_TEXT_POKE1, page_to_phys(pages[1]));
-	vaddr = (char *)fix_to_virt(FIX_TEXT_POKE0);
-	memcpy(&vaddr[(unsigned long)addr & ~PAGE_MASK], opcode, len);
-	clear_fixmap(FIX_TEXT_POKE0);
-	if (pages[1])
-		clear_fixmap(FIX_TEXT_POKE1);
-	local_flush_tlb();
-	sync_core();
-	/* Could also do a CLFLUSH here to speed up CPU recovery; but
-	   that causes hangs on some VIA CPUs. */
-	for (i = 0; i < len; i++)
-		BUG_ON(((char *)addr)[i] != ((char *)opcode)[i]);
+
+	/*
+	 * The lock is not really needed, but this allows to avoid open-coding.
+	 */
+	ptep = get_locked_pte(poking_mm, poking_addr, &ptl);
+
+	/*
+	 * If we failed to allocate a PTE, fail silently. The caller (text_poke)
+	 * will detect that the write failed when it compares the memory with
+	 * the new opcode.
+	 */
+	if (unlikely(!ptep))
+		goto out;
+
+	pte = mk_pte(pages[0], PAGE_KERNEL);
+	set_pte_at(poking_mm, poking_addr, ptep, pte);
+
+	if (cross_page_boundary) {
+		pte = mk_pte(pages[1], PAGE_KERNEL);
+		set_pte_at(poking_mm, poking_addr + PAGE_SIZE, ptep + 1, pte);
+	}
+
+	/*
+	 * Loading the temporary mm behaves as a compiler barrier, which
+	 * guarantees that the PTE will be set at the time memcpy() is done.
+	 */
+	prev = use_temporary_mm(poking_mm);
+
+	kasan_disable_current();
+	memcpy((u8 *)poking_addr + offset_in_page(addr), opcode, len);
+	kasan_enable_current();
+
+	/*
+	 * Ensure that the PTE is only cleared after the instructions of memcpy
+	 * were issued by using a compiler barrier.
+	 */
+	barrier();
+
+	pte_clear(poking_mm, poking_addr, ptep);
+
+	/*
+	 * __flush_tlb_one_user() performs a redundant TLB flush when PTI is on,
+	 * as it also flushes the corresponding "user" address spaces, which
+	 * does not exist.
+	 *
+	 * Poking, however, is already very inefficient since it does not try to
+	 * batch updates, so we ignore this problem for the time being.
+	 *
+	 * Since the PTEs do not exist in other kernel address-spaces, we do
+	 * not use __flush_tlb_one_kernel(), which when PTI is on would cause
+	 * more unwarranted TLB flushes.
+	 *
+	 * There is a slight anomaly here: the PTE is a supervisor-only and
+	 * (potentially) global and we use __flush_tlb_one_user() but this
+	 * should be fine.
+	 */
+	__flush_tlb_one_user(poking_addr);
+	if (cross_page_boundary) {
+		pte_clear(poking_mm, poking_addr + PAGE_SIZE, ptep + 1);
+		__flush_tlb_one_user(poking_addr + PAGE_SIZE);
+	}
+
+	/*
+	 * Loading the previous page-table hierarchy requires a serializing
+	 * instruction that already allows the core to see the updated version.
+	 * Xen-PV is assumed to serialize execution in a similar manner.
+	 */
+	unuse_temporary_mm(prev);
+
+	pte_unmap_unlock(ptep, ptl);
+out:
+	/*
+	 * TODO: allow the callers to deal with potential failures and do not
+	 * panic so easily.
+	 */
+	BUG_ON(memcmp(addr, opcode, len));
 	local_irq_restore(flags);
 	return addr;
 }
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ