linux-kernel - [PATCH 04/10] drm/sun4i: sun6i_mipi

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181103100900.30313-5-jagan@amarulasolutions.com>
Date:   Sat,  3 Nov 2018 15:38:54 +0530
From:   Jagan Teki <jagan@...rulasolutions.com>
To:     Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
        Maxime Ripard <maxime.ripard@...tlin.com>,
        Sean Paul <sean@...rly.run>, David Airlie <airlied@...ux.ie>,
        Rob Herring <robh+dt@...nel.org>, Chen-Yu Tsai <wens@...e.org>,
        Icenowy Zheng <icenowy@...c.io>,
        Jernej Skrabec <jernej.skrabec@...l.net>,
        Vasily Khoruzhick <anarsoul@...il.com>,
        Thierry Reding <thierry.reding@...il.com>,
        Mark Rutland <mark.rutland@....com>,
        dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        Michael Trimarchi <michael@...rulasolutions.com>,
        TL Lim <tllim@...e64.org>, linux-sunxi@...glegroups.com
Cc:     Jagan Teki <jagan@...rulasolutions.com>
Subject: [PATCH 04/10] drm/sun4i: sun6i_mipi_dsi: Setup burst mode

Setting up burst mode display would require to compute
- Horizontal timing edge values to fill burst drq register
- Line, sync values to fill burst line register

Since there is no direct documentation for these computations
the edge and line formulas are taken from BSP code
(in drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)
line_num = panel->lcd_ht*dsi_pixel_bits[panel->lcd_dsi_format]/
	  (8*panel->lcd_dsi_lane);
edge1 = sync_point+(panel->lcd_x+panel->lcd_hbp+20)*
	dsi_pixel_bits[panel->lcd_dsi_format] /(8*panel->lcd_dsi_lane);
edge1 = (edge1>line_num)?line_num:edge1;
edge0 = edge1+(panel->lcd_x+40)*tcon_div/8;
edge0 = (edge0>line_num)?(edge0-line_num):1;

Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
---
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 48 +++++++++++++++++++++-----
 1 file changed, 40 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 4965b2c71e4c..b6c01891df36 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -375,20 +375,52 @@ static void sun6i_dsi_setup_burst(struct sun6i_dsi *dsi,
 				  struct drm_display_mode *mode)
 {
 	struct mipi_dsi_device *device = dsi->device;
+	unsigned int Bpp = mipi_dsi_pixel_format_to_bpp(device->format);
+	u32 line_num, edge0, edge1, hact_sync_bp;
+	u32 sync_point, tcon_div;
 	u32 val = 0;
 
-	if ((mode->hsync_start - mode->hdisplay) > 20) {
-		/* Maaaaaagic */
-		u16 drq = (mode->hsync_start - mode->hdisplay) - 20;
+	if (device->mode_flags != MIPI_DSI_MODE_VIDEO_BURST) {
+		if ((mode->hsync_start - mode->hdisplay) > 20) {
+			/* Maaaaaagic */
+			u16 drq = (mode->hsync_start - mode->hdisplay) - 20;
 
-		drq *= mipi_dsi_pixel_format_to_bpp(device->format);
-		drq /= 32;
+			drq *= Bpp;
+			drq /= 32;
 
-		val = (SUN6I_DSI_TCON_DRQ_ENABLE_MODE |
-		       SUN6I_DSI_TCON_DRQ_SET(drq));
+			val = (SUN6I_DSI_TCON_DRQ_ENABLE_MODE |
+			       SUN6I_DSI_TCON_DRQ_SET(drq));
+		}
+
+		regmap_write(dsi->regs, SUN6I_DSI_TCON_DRQ_REG, val);
+
+		return;
 	}
 
-	regmap_write(dsi->regs, SUN6I_DSI_TCON_DRQ_REG, val);
+	sync_point = 40;
+	tcon_div = 8;	/* FIXME need to retrive the divider from TCON */
+
+	line_num = mode->htotal * Bpp / (8 * device->lanes);
+	/* Horizental timings duration excluding front porch */
+	hact_sync_bp = (mode->hdisplay + mode->htotal - mode->hsync_start);
+	edge1 = sync_point + ((hact_sync_bp + 20) * Bpp / (8 * device->lanes));
+	if (edge1 > line_num)
+		edge1 = line_num;
+
+	edge0 = edge1 + (mode->hdisplay + 40) * tcon_div / 8;
+	if (edge0 > line_num)
+		edge0 -= line_num;
+	else
+		edge0 = 1;
+
+	regmap_write(dsi->regs, SUN6I_DSI_BURST_DRQ_REG,
+		     SUN6I_DSI_BURST_DRQ_EDGE1(edge1) |
+		     SUN6I_DSI_BURST_DRQ_EDGE0(edge0));
+	regmap_write(dsi->regs, SUN6I_DSI_TCON_DRQ_REG,
+		     SUN6I_DSI_TCON_DRQ_ENABLE_MODE);
+	regmap_write(dsi->regs, SUN6I_DSI_BURST_LINE_REG,
+		     SUN6I_DSI_BURST_LINE_NUM(line_num) |
+		     SUN6I_DSI_BURST_LINE_SYNC_POINT(sync_point));
 }
 
 static void sun6i_dsi_setup_inst_loop(struct sun6i_dsi *dsi,
-- 
2.18.0.321.gffc6fa0e3