linux-kernel - [PATCH v3 04/28] clk: sunxi-ng: h6: Set video PLLs limits

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181104182705.18047-5-jernej.skrabec@siol.net>
Date:   Sun,  4 Nov 2018 19:26:41 +0100
From:   Jernej Skrabec <jernej.skrabec@...l.net>
To:     maxime.ripard@...tlin.com, wens@...e.org
Cc:     robh+dt@...nel.org, mturquette@...libre.com, sboyd@...nel.org,
        airlied@...ux.ie, architt@...eaurora.org, a.hajda@...sung.com,
        Laurent.pinchart@...asonboard.com, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-clk@...r.kernel.org, dri-devel@...ts.freedesktop.org,
        linux-sunxi@...glegroups.com, jernej.skrabec@...l.net
Subject: [PATCH v3 04/28] clk: sunxi-ng: h6: Set video PLLs limits

Video PLL factors can be set in a way that final PLL rate is outside
stable range. H6 user manual specifically says that N factor should not
be below 12. While it doesn't says anything about maximum stable rate, it
is clear that PLL doesn't work at 6.096 GHz (254 * 24 MHz).

Set minimum allowed PLL video rate to 288 MHz (12 * 24 MHz) and maximum
to 2.4 GHz, which is maximum in BSP driver.

Signed-off-by: Jernej Skrabec <jernej.skrabec@...l.net>
---
 drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
index 2193e1495086..19ff09f610e4 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
@@ -120,6 +120,8 @@ static struct ccu_nm pll_video0_clk = {
 	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
 	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
 	.fixed_post_div	= 4,
+	.min_rate	= 288000000,
+	.max_rate	= 2400000000UL,
 	.common		= {
 		.reg		= 0x040,
 		.features	= CCU_FEATURE_FIXED_POSTDIV,
@@ -136,6 +138,8 @@ static struct ccu_nm pll_video1_clk = {
 	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
 	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
 	.fixed_post_div	= 4,
+	.min_rate	= 288000000,
+	.max_rate	= 2400000000UL,
 	.common		= {
 		.reg		= 0x048,
 		.features	= CCU_FEATURE_FIXED_POSTDIV,
-- 
2.19.1