[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181105073054.24407-3-lkundrak@v3.sk>
Date: Mon, 5 Nov 2018 08:30:45 +0100
From: Lubomir Rintel <lkundrak@...sk>
To: Mauro Carvalho Chehab <mchehab@...nel.org>,
Jonathan Corbet <corbet@....net>, linux-media@...r.kernel.org
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Lubomir Rintel <lkundrak@...sk>,
James Cameron <quozl@...top.org>, Pavel Machek <pavel@....cz>
Subject: [PATCH 02/11] media: ov7670: control clock along with power
This provides more power saving when the sensor is off.
While at that, do the delay on power/clock enable even if the sensor driver
itself doesn't control the GPIOs. This is required for the OLPC XO-1
platform, that lacks the proper power/reset properties in its DT, but
needs the delay after the sensor is clocked up.
Signed-off-by: Lubomir Rintel <lkundrak@...sk>
---
drivers/media/i2c/ov7670.c | 37 +++++++++++++++++++++----------------
1 file changed, 21 insertions(+), 16 deletions(-)
diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
index d87f2362bf40..a3e72c62382c 100644
--- a/drivers/media/i2c/ov7670.c
+++ b/drivers/media/i2c/ov7670.c
@@ -241,6 +241,7 @@ struct ov7670_info {
struct v4l2_mbus_framefmt format;
struct ov7670_format_struct *fmt; /* Current format */
struct clk *clk;
+ int on;
struct gpio_desc *resetb_gpio;
struct gpio_desc *pwdn_gpio;
unsigned int mbus_config; /* Media bus configuration flags */
@@ -1610,15 +1611,26 @@ static int ov7670_s_power(struct v4l2_subdev *sd, int on)
{
struct ov7670_info *info = to_state(sd);
+ if (info->on == on)
+ return 0;
+
+ if (on)
+ clk_prepare_enable(info->clk);
+ else
+ clk_disable_unprepare(info->clk);
+
if (info->pwdn_gpio)
gpiod_set_value(info->pwdn_gpio, !on);
if (on && info->resetb_gpio) {
gpiod_set_value(info->resetb_gpio, 1);
usleep_range(500, 1000);
gpiod_set_value(info->resetb_gpio, 0);
- usleep_range(3000, 5000);
}
+ if (on && (info->pwdn_gpio || info->resetb_gpio || info->clk))
+ usleep_range(3000, 5000);
+
+ info->on = on;
return 0;
}
@@ -1817,24 +1829,20 @@ static int ov7670_probe(struct i2c_client *client,
else
return ret;
}
- if (info->clk) {
- ret = clk_prepare_enable(info->clk);
- if (ret)
- return ret;
+ ret = ov7670_init_gpio(client, info);
+ if (ret)
+ return ret;
+
+ ov7670_s_power(sd, 1);
+ if (info->clk) {
info->clock_speed = clk_get_rate(info->clk) / 1000000;
if (info->clock_speed < 10 || info->clock_speed > 48) {
ret = -EINVAL;
- goto clk_disable;
+ goto power_off;
}
}
- ret = ov7670_init_gpio(client, info);
- if (ret)
- goto clk_disable;
-
- ov7670_s_power(sd, 1);
-
/* Make sure it's an ov7670 */
ret = ov7670_detect(sd);
if (ret) {
@@ -1913,6 +1921,7 @@ static int ov7670_probe(struct i2c_client *client,
if (ret < 0)
goto entity_cleanup;
+ ov7670_s_power(sd, 0);
return 0;
entity_cleanup:
@@ -1921,12 +1930,9 @@ static int ov7670_probe(struct i2c_client *client,
v4l2_ctrl_handler_free(&info->hdl);
power_off:
ov7670_s_power(sd, 0);
-clk_disable:
- clk_disable_unprepare(info->clk);
return ret;
}
-
static int ov7670_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
@@ -1934,7 +1940,6 @@ static int ov7670_remove(struct i2c_client *client)
v4l2_async_unregister_subdev(sd);
v4l2_ctrl_handler_free(&info->hdl);
- clk_disable_unprepare(info->clk);
media_entity_cleanup(&info->sd.entity);
ov7670_s_power(sd, 0);
return 0;
--
2.19.1
Powered by blists - more mailing lists