[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181105103625.9644-4-bugalski.piotr@gmail.com>
Date: Mon, 5 Nov 2018 11:36:22 +0100
From: Piotr Bugalski <bugalski.piotr@...il.com>
To: Mark Brown <broonie@...nel.org>, linux-spi@...r.kernel.org,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
Boris Brezillon <boris.brezillon@...tlin.com>,
Marek Vasut <marek.vasut@...il.com>,
Richard Weinberger <richard@....at>,
linux-mtd@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Cyrille Pitchen <cyrille.pitchen@...rochip.com>,
Tudor Ambarus <tudor.ambarus@...rochip.com>,
Piotr Bugalski <bugalski.piotr@...il.com>
Subject: [PATCH v3 3/6] mtd: spi-nor: atmel-quadspi: Use spi-mem interface for atmel-quadspi driver
Previously added spi-mem interface is now used instead of older approach.
Suggested-by: Boris Brezillon <boris.brezillon@...tlin.com>
Signed-off-by: Piotr Bugalski <bugalski.piotr@...il.com>
---
drivers/mtd/spi-nor/atmel-quadspi.c | 91 ++++++++-----------------------------
1 file changed, 18 insertions(+), 73 deletions(-)
diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
index 896478a290ec..644e3f0c1558 100644
--- a/drivers/mtd/spi-nor/atmel-quadspi.c
+++ b/drivers/mtd/spi-nor/atmel-quadspi.c
@@ -766,27 +766,9 @@ static ssize_t atmel_qspi_read(struct spi_nor *nor, loff_t from, size_t len,
static int atmel_qspi_init(struct atmel_qspi *aq)
{
- unsigned long src_rate;
- u32 mr, scr, scbr;
-
/* Reset the QSPI controller */
qspi_writel(aq, QSPI_CR, QSPI_CR_SWRST);
- /* Set the QSPI controller in Serial Memory Mode */
- mr = QSPI_MR_NBBITS(8) | QSPI_MR_SMM;
- qspi_writel(aq, QSPI_MR, mr);
-
- src_rate = clk_get_rate(aq->clk);
- if (!src_rate)
- return -EINVAL;
-
- /* Compute the QSPI baudrate */
- scbr = DIV_ROUND_UP(src_rate, aq->clk_rate);
- if (scbr > 0)
- scbr--;
- scr = QSPI_SCR_SCBR(scbr);
- qspi_writel(aq, QSPI_SCR, scr);
-
/* Enable the QSPI controller */
qspi_writel(aq, QSPI_CR, QSPI_CR_QSPIEN);
@@ -814,38 +796,25 @@ static irqreturn_t atmel_qspi_interrupt(int irq, void *dev_id)
static int atmel_qspi_probe(struct platform_device *pdev)
{
- const struct spi_nor_hwcaps hwcaps = {
- .mask = SNOR_HWCAPS_READ |
- SNOR_HWCAPS_READ_FAST |
- SNOR_HWCAPS_READ_1_1_2 |
- SNOR_HWCAPS_READ_1_2_2 |
- SNOR_HWCAPS_READ_2_2_2 |
- SNOR_HWCAPS_READ_1_1_4 |
- SNOR_HWCAPS_READ_1_4_4 |
- SNOR_HWCAPS_READ_4_4_4 |
- SNOR_HWCAPS_PP |
- SNOR_HWCAPS_PP_1_1_4 |
- SNOR_HWCAPS_PP_1_4_4 |
- SNOR_HWCAPS_PP_4_4_4,
- };
- struct device_node *child, *np = pdev->dev.of_node;
+ struct spi_controller *ctrl;
struct atmel_qspi *aq;
struct resource *res;
- struct spi_nor *nor;
- struct mtd_info *mtd;
int irq, err = 0;
- if (of_get_child_count(np) != 1)
- return -ENODEV;
- child = of_get_next_child(np, NULL);
+ ctrl = spi_alloc_master(&pdev->dev, sizeof(*aq));
+ if (!ctrl)
+ return -ENOMEM;
- aq = devm_kzalloc(&pdev->dev, sizeof(*aq), GFP_KERNEL);
- if (!aq) {
- err = -ENOMEM;
- goto exit;
- }
+ ctrl->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_DUAL | SPI_TX_QUAD;
+ ctrl->setup = atmel_qspi_setup;
+ ctrl->bus_num = -1;
+ ctrl->mem_ops = &atmel_qspi_mem_ops;
+ ctrl->num_chipselect = 1;
+ ctrl->dev.of_node = pdev->dev.of_node;
+ platform_set_drvdata(pdev, ctrl);
+
+ aq = spi_controller_get_devdata(ctrl);
- platform_set_drvdata(pdev, aq);
init_completion(&aq->cmd_completion);
aq->pdev = pdev;
@@ -894,54 +863,30 @@ static int atmel_qspi_probe(struct platform_device *pdev)
if (err)
goto disable_clk;
- /* Setup the spi-nor */
- nor = &aq->nor;
- mtd = &nor->mtd;
-
- nor->dev = &pdev->dev;
- spi_nor_set_flash_node(nor, child);
- nor->priv = aq;
- mtd->priv = nor;
-
- nor->read_reg = atmel_qspi_read_reg;
- nor->write_reg = atmel_qspi_write_reg;
- nor->read = atmel_qspi_read;
- nor->write = atmel_qspi_write;
- nor->erase = atmel_qspi_erase;
-
- err = of_property_read_u32(child, "spi-max-frequency", &aq->clk_rate);
- if (err < 0)
- goto disable_clk;
-
err = atmel_qspi_init(aq);
if (err)
goto disable_clk;
- err = spi_nor_scan(nor, NULL, &hwcaps);
- if (err)
- goto disable_clk;
-
- err = mtd_device_register(mtd, NULL, 0);
+ err = spi_register_controller(ctrl);
if (err)
goto disable_clk;
- of_node_put(child);
-
return 0;
disable_clk:
clk_disable_unprepare(aq->clk);
exit:
- of_node_put(child);
+ spi_controller_put(ctrl);
return err;
}
static int atmel_qspi_remove(struct platform_device *pdev)
{
- struct atmel_qspi *aq = platform_get_drvdata(pdev);
+ struct spi_controller *ctrl = platform_get_drvdata(pdev);
+ struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
- mtd_device_unregister(&aq->nor.mtd);
+ spi_unregister_controller(ctrl);
qspi_writel(aq, QSPI_CR, QSPI_CR_QSPIDIS);
clk_disable_unprepare(aq->clk);
return 0;
--
2.11.0
Powered by blists - more mailing lists