| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20181106074314.GA11430@nishad>
Date: Tue, 6 Nov 2018 13:13:19 +0530
From: Nishad Kamdar <nishadkamdar@...il.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Jens Frederich <jfrederich@...il.com>,
Daniel Drake <dsd@...top.org>,
Jon Nettleton <jon.nettleton@...il.com>,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3] staging: olpc_dcon: olpc_dcon_xo_1.c: Switch to the gpio
descriptor interface
Use the gpiod interface instead of the deprecated old non-descriptor
interface in olpc_dcon_xo_1.c.
---
Changes in v3:
- Resolve a few compilation errors.
Changes in v2:
- Resolve a few compilation errors.
- Add a level of indirection to read and write gpios.
Signed-off-by: Nishad Kamdar <nishadkamdar@...il.com>
---
drivers/staging/olpc_dcon/olpc_dcon_xo_1.c | 90 +++++++++++-----------
1 file changed, 47 insertions(+), 43 deletions(-)
diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
index ff145d493e1b..80b8d4153414 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
@@ -11,35 +11,51 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/cs5535.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/delay.h>
+#include <linux/i2c.h>
#include <asm/olpc.h>
#include "olpc_dcon.h"
+enum dcon_gpios {
+ OLPC_DCON_STAT0,
+ OLPC_DCON_STAT1,
+ OLPC_DCON_IRQ,
+ OLPC_DCON_LOAD,
+ OLPC_DCON_BLANK,
+};
+
+struct dcon_gpio {
+ const char *name;
+ unsigned long flags;
+};
+
+static const struct dcon_gpio gpios_asis[] = {
+ [OLPC_DCON_STAT0] = { .name = "dcon_stat0", .flags = GPIOD_ASIS },
+ [OLPC_DCON_STAT1] = { .name = "dcon_stat1", .flags = GPIOD_ASIS },
+ [OLPC_DCON_IRQ] = { .name = "dcon_irq", .flags = GPIOD_ASIS },
+ [OLPC_DCON_LOAD] = { .name = "dcon_load", .flags = GPIOD_ASIS },
+ [OLPC_DCON_BLANK] = { .name = "dcon_blank", .flags = GPIOD_ASIS },
+};
+
+struct gpio_desc *gpios[5];
+
static int dcon_init_xo_1(struct dcon_priv *dcon)
{
unsigned char lob;
-
- if (gpio_request(OLPC_GPIO_DCON_STAT0, "OLPC-DCON")) {
- pr_err("failed to request STAT0 GPIO\n");
- return -EIO;
- }
- if (gpio_request(OLPC_GPIO_DCON_STAT1, "OLPC-DCON")) {
- pr_err("failed to request STAT1 GPIO\n");
- goto err_gp_stat1;
- }
- if (gpio_request(OLPC_GPIO_DCON_IRQ, "OLPC-DCON")) {
- pr_err("failed to request IRQ GPIO\n");
- goto err_gp_irq;
- }
- if (gpio_request(OLPC_GPIO_DCON_LOAD, "OLPC-DCON")) {
- pr_err("failed to request LOAD GPIO\n");
- goto err_gp_load;
- }
- if (gpio_request(OLPC_GPIO_DCON_BLANK, "OLPC-DCON")) {
- pr_err("failed to request BLANK GPIO\n");
- goto err_gp_blank;
+ int ret, i;
+ struct dcon_gpio *pin = &gpios_asis[0];
+
+ for (i = 0; i < ARRAY_SIZE(gpios_asis); i++) {
+ gpios[i] = devm_gpiod_get(&dcon->client->dev, pin[i].name,
+ pin[i].flags);
+ if (IS_ERR(gpios[i])) {
+ ret = PTR_ERR(gpios[i]);
+ pr_err("failed to request %s GPIO: %d\n", pin[i].name,
+ ret);
+ return ret;
+ }
}
/* Turn off the event enable for GPIO7 just to be safe */
@@ -61,12 +77,12 @@ static int dcon_init_xo_1(struct dcon_priv *dcon)
dcon->pending_src = dcon->curr_src;
/* Set the directions for the GPIO pins */
- gpio_direction_input(OLPC_GPIO_DCON_STAT0);
- gpio_direction_input(OLPC_GPIO_DCON_STAT1);
- gpio_direction_input(OLPC_GPIO_DCON_IRQ);
- gpio_direction_input(OLPC_GPIO_DCON_BLANK);
- gpio_direction_output(OLPC_GPIO_DCON_LOAD,
- dcon->curr_src == DCON_SOURCE_CPU);
+ gpiod_direction_input(gpios[OLPC_DCON_STAT0]);
+ gpiod_direction_input(gpios[OLPC_DCON_STAT1]);
+ gpiod_direction_input(gpios[OLPC_DCON_IRQ]);
+ gpiod_direction_input(gpios[OLPC_DCON_BLANK]);
+ gpiod_direction_output(gpios[OLPC_DCON_LOAD],
+ dcon->curr_src == DCON_SOURCE_CPU);
/* Set up the interrupt mappings */
@@ -84,7 +100,7 @@ static int dcon_init_xo_1(struct dcon_priv *dcon)
/* Register the interrupt handler */
if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", dcon)) {
pr_err("failed to request DCON's irq\n");
- goto err_req_irq;
+ return -EIO;
}
/* Clear INV_EN for GPIO7 (DCONIRQ) */
@@ -125,18 +141,6 @@ static int dcon_init_xo_1(struct dcon_priv *dcon)
cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_EVENTS_ENABLE);
return 0;
-
-err_req_irq:
- gpio_free(OLPC_GPIO_DCON_BLANK);
-err_gp_blank:
- gpio_free(OLPC_GPIO_DCON_LOAD);
-err_gp_load:
- gpio_free(OLPC_GPIO_DCON_IRQ);
-err_gp_irq:
- gpio_free(OLPC_GPIO_DCON_STAT1);
-err_gp_stat1:
- gpio_free(OLPC_GPIO_DCON_STAT0);
- return -EIO;
}
static void dcon_wiggle_xo_1(void)
@@ -180,13 +184,13 @@ static void dcon_wiggle_xo_1(void)
static void dcon_set_dconload_1(int val)
{
- gpio_set_value(OLPC_GPIO_DCON_LOAD, val);
+ gpiod_set_value(gpios[OLPC_DCON_LOAD], val);
}
static int dcon_read_status_xo_1(u8 *status)
{
- *status = gpio_get_value(OLPC_GPIO_DCON_STAT0);
- *status |= gpio_get_value(OLPC_GPIO_DCON_STAT1) << 1;
+ *status = gpiod_get_value(gpios[OLPC_DCON_STAT0]);
+ *status |= gpiod_get_value(gpios[OLPC_DCON_STAT1]) << 1;
/* Clear the negative edge status for GPIO7 */
cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_NEGATIVE_EDGE_STS);
--
2.17.1
Powered by blists - more mailing lists