[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <30c1ff317baefde88a0f4d0a002b19010290d16b.camel@analog.com>
Date: Tue, 6 Nov 2018 09:24:44 +0000
From: "Ardelean, Alexandru" <alexandru.Ardelean@...log.com>
To: "lars@...afoo.de" <lars@...afoo.de>,
"knaack.h@....de" <knaack.h@....de>,
"jic23@...nel.org" <jic23@...nel.org>,
"Hennerich, Michael" <Michael.Hennerich@...log.com>,
"renatogeh@...il.com" <renatogeh@...il.com>,
"giuliano.belinassi@....br" <giuliano.belinassi@....br>,
"pmeerw@...erw.net" <pmeerw@...erw.net>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-iio@...r.kernel.org" <linux-iio@...r.kernel.org>,
"devel@...verdev.osuosl.org" <devel@...verdev.osuosl.org>,
"kernel-usp@...glegroups.com" <kernel-usp@...glegroups.com>
Subject: Re: [PATCH v4 1/2] staging: iio: ad7780: update voltage on read
On Mon, 2018-11-05 at 17:14 -0200, Renato Lui Geh wrote:
> The ad7780 driver previously did not read the correct device output, as
> it read an outdated value set at initialization. It now updates its
> voltage on read.
>
Looks good from my side.
Alex
> Signed-off-by: Renato Lui Geh <renatogeh@...il.com>
> ---
> Changes in v3:
> - removed initialization (int voltage_uv = 0)
> - returns error when voltage_uv is null
> Changes in v4:
> - returns error when voltage_uv is negative
>
> drivers/staging/iio/adc/ad7780.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/staging/iio/adc/ad7780.c
> b/drivers/staging/iio/adc/ad7780.c
> index b67412db0318..c7cb05cedbbc 100644
> --- a/drivers/staging/iio/adc/ad7780.c
> +++ b/drivers/staging/iio/adc/ad7780.c
> @@ -87,12 +87,16 @@ static int ad7780_read_raw(struct iio_dev *indio_dev,
> long m)
> {
> struct ad7780_state *st = iio_priv(indio_dev);
> + int voltage_uv;
>
> switch (m) {
> case IIO_CHAN_INFO_RAW:
> return ad_sigma_delta_single_conversion(indio_dev, chan,
> val);
> case IIO_CHAN_INFO_SCALE:
> - *val = st->int_vref_mv * st->gain;
> + voltage_uv = regulator_get_voltage(st->reg);
> + if (voltage_uv < 0)
> + return voltage_uv;
> + *val = (voltage_uv / 1000) * st->gain;
> *val2 = chan->scan_type.realbits - 1;
> return IIO_VAL_FRACTIONAL_LOG2;
> case IIO_CHAN_INFO_OFFSET:
Powered by blists - more mailing lists