linux-kernel - Re: [PATCH 1/3] drm/meson: Support Overlay plane for video rendering

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAMO6nay=te3W67b83LKv35tXL8+09rvE9EaFwLDrRBhwpEgMvQ@mail.gmail.com>
Date:   Wed, 7 Nov 2018 10:41:27 +0100
From:   Maxime Jourdan <mjourdan@...libre.com>
To:     Neil Armstrong <narmstrong@...libre.com>
Cc:     dri-devel@...ts.freedesktop.org, linux-amlogic@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 1/3] drm/meson: Support Overlay plane for video rendering

On Tue, Nov 6, 2018 at 10:40 AM Neil Armstrong <narmstrong@...libre.com> wrote:
>
> The Amlogic Meson GX SoCs support an Overlay plane behind the primary
> plane for video rendering.
>
> This Overlay plane support various YUV layouts :
> - YUYV
> - NV12 / NV21
> - YUV444 / 422 / 420 / 411 / 410
>
> The scaler supports a wide range of scaling ratios, but for simplicity,
> plane atomic check limits the scaling from x5 to /5 in vertical and
> horizontal scaling.
>
> The z-order is fixed and always behind the primary plane and cannot be changed.
>
> The scaling parameter algorithm was taken from the Amlogic vendor kernel
> code and rewritten to match the atomic universal plane requirements.
>
> The video rendering using this overlay plane support has been tested using
> the new Kodi DRM-KMS Prime rendering path along the in-review V4L2 Mem2Mem
> Hardware Video Decoder up to 3840x2160 NV12 frames on various display modes.
>
> Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
> ---
>  drivers/gpu/drm/meson/Makefile          |   2 +-
>  drivers/gpu/drm/meson/meson_canvas.c    |   7 +-
>  drivers/gpu/drm/meson/meson_canvas.h    |  11 +-
>  drivers/gpu/drm/meson/meson_crtc.c      | 216 +++++++++++-
>  drivers/gpu/drm/meson/meson_drv.c       |  29 +-
>  drivers/gpu/drm/meson/meson_drv.h       |  52 +++
>  drivers/gpu/drm/meson/meson_overlay.c   | 586 ++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/meson/meson_overlay.h   |  14 +
>  drivers/gpu/drm/meson/meson_registers.h |   3 +
>  drivers/gpu/drm/meson/meson_viu.c       |  15 +
>  drivers/gpu/drm/meson/meson_vpp.c       |  44 ++-
>  11 files changed, 971 insertions(+), 8 deletions(-)
>  create mode 100644 drivers/gpu/drm/meson/meson_overlay.c
>  create mode 100644 drivers/gpu/drm/meson/meson_overlay.h
>

Tested by rendering video with:
 - gstreamer 1.14.4 using kmssink
 - ffmpeg-drm (https://github.com/Elyotna/ffmpeg-drm),
by applying this patch on top of the video decoder patch series.

Used different resolutions and pixel aspect ratios.

Tested-by: Maxime Jourdan <mjourdan@...libre.com>

[snip]