linux-kernel - [PATCH v3 3/8] drm/sun4i: tcon: Support an active-low DE signal with RGB interface

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181107181843.27628-4-contact@paulk.fr>
Date:   Wed,  7 Nov 2018 19:18:38 +0100
From:   Paul Kocialkowski <contact@...lk.fr>
To:     dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc:     Thierry Reding <thierry.reding@...il.com>,
        David Airlie <airlied@...ux.ie>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Maxime Ripard <maxime.ripard@...tlin.com>,
        Chen-Yu Tsai <wens@...e.org>, linux-sunxi@...glegroups.com,
        Mark Van den Borre <mark@...dem.org>,
        Gerry Demaret <gerry@...dem.org>,
        Luc Verhaegen <libv@...net.be>,
        Paul Kocialkowski <contact@...lk.fr>
Subject: [PATCH v3 3/8] drm/sun4i: tcon: Support an active-low DE signal with RGB interface

Some panels need an active-low data enable (DE) signal for the RGB
interface. This requires flipping a bit in the TCON0 polarity register
when setting up the mode for the RGB interface.

Match the associated bus flag and use it to set the polarity inversion
bit for the DE signal when required.

Signed-off-by: Paul Kocialkowski <contact@...lk.fr>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 7 ++++++-
 drivers/gpu/drm/sun4i/sun4i_tcon.h | 1 +
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 262ffb6b0f82..0420f5c978b9 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -543,6 +543,9 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
 	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
 		val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE;
 
+	if (display_info.bus_flags & DRM_BUS_FLAG_DE_LOW)
+		val |= SUN4I_TCON0_IO_POL_DE_NEGATIVE;
+
 	/*
 	 * On A20 and similar SoCs, the only way to achieve Positive Edge
 	 * (Rising Edge), is setting dclk clock phase to 2/3(240°).
@@ -565,7 +568,9 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
 		clk_set_phase(tcon->dclk, 0);
 
 	regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG,
-			   SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | SUN4I_TCON0_IO_POL_VSYNC_POSITIVE,
+			   SUN4I_TCON0_IO_POL_HSYNC_POSITIVE |
+			   SUN4I_TCON0_IO_POL_VSYNC_POSITIVE |
+			   SUN4I_TCON0_IO_POL_DE_NEGATIVE,
 			   val);
 
 	/* Map output pins to channel 0 */
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h
index 3d492c8be1fc..b5214d71610f 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.h
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h
@@ -116,6 +116,7 @@
 
 #define SUN4I_TCON0_IO_POL_REG			0x88
 #define SUN4I_TCON0_IO_POL_DCLK_PHASE(phase)		((phase & 3) << 28)
+#define SUN4I_TCON0_IO_POL_DE_NEGATIVE			BIT(27)
 #define SUN4I_TCON0_IO_POL_HSYNC_POSITIVE		BIT(25)
 #define SUN4I_TCON0_IO_POL_VSYNC_POSITIVE		BIT(24)
 
-- 
2.19.1