[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <f9657cd4-faea-8a5e-2c2a-35320ba3c72a@linux.intel.com>
Date: Wed, 7 Nov 2018 14:49:50 -0600
From: Richard Gong <richard.gong@...ux.intel.com>
To: Moritz Fischer <mdf@...nel.org>
Cc: gregkh@...uxfoundation.org, catalin.marinas@....com,
will.deacon@....com, dinguyen@...nel.org, robh+dt@...nel.org,
mark.rutland@....com, atull@...nel.org, arnd@...db.de,
corbet@....net, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-fpga@...r.kernel.org, linux-doc@...r.kernel.org,
todd.riffel@...el.com, richard.gong@...el.com
Subject: Re: [PATCHv10 8/8] firmware: add remote status update client support
Hi Moritz,
On 11/6/18 11:22 AM, Moritz Fischer wrote:
> Hi Richard,
>
> On Tue, Nov 06, 2018 at 10:52:52AM -0600, richard.gong@...ux.intel.com wrote:
>> From: Richard Gong <richard.gong@...el.com>
>>
>> Extend Intel Stratix10 service layer to support the second service layer
>> client, Remote Status Update (RSU).
>>
>> RSU is used to provide our customers with protection against loading bas
> Nit: 'bas' -> 'bad'
>> bitstreams onto their devices when those device are booting from flash.
>>
I will correct that in the next submission.
>> Signed-off-by: Richard Gong <richard.gong@...el.com>
>> Signed-off-by: Alan Tull <atull@...nel.org>
>> ---
>> v7: this patch is added in patch set version 7
>> v8: no change
>> v9: add case for COMMAND_RSU_UPDATE at svc_thread_recv_status_ok() at
>> stratix10-svc.c file
>> add RSU related definitions at stratix10-smc.h file
>> v10: s/misc/firmware at commit header
>> ---
>> drivers/firmware/stratix10-svc.c | 35 +++++++++++++++-
>> include/linux/firmware/intel/stratix10-smc.h | 47 ++++++++++++++++++++++
>> .../linux/firmware/intel/stratix10-svc-client.h | 20 ++++++++-
>> 3 files changed, 98 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/firmware/stratix10-svc.c b/drivers/firmware/stratix10-svc.c
>> index 898e588..ae99221 100644
>> --- a/drivers/firmware/stratix10-svc.c
>> +++ b/drivers/firmware/stratix10-svc.c
>> @@ -34,7 +34,7 @@
>> * timeout is set to 30 seconds (30 * 1000) at Intel Stratix10 SoC.
>> */
>> #define SVC_NUM_DATA_IN_FIFO 32
>> -#define SVC_NUM_CHANNEL 1
>> +#define SVC_NUM_CHANNEL 2
>> #define FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS 200
>> #define FPGA_CONFIG_STATUS_TIMEOUT_SEC 30
>>
>> @@ -271,7 +271,7 @@ static void svc_thread_cmd_config_status(struct stratix10_svc_controller *ctrl,
>> * @cb_data: pointer to callback data structure to service client
>> * @res: result from SMC or HVC call
>> *
>> - * Send back the correspond status to the service client (FPGA manager etc).
>> + * Send back the correspond status to the service clients.
>> */
>> static void svc_thread_recv_status_ok(struct stratix10_svc_data *p_data,
>> struct stratix10_svc_cb_data *cb_data,
>> @@ -295,6 +295,9 @@ static void svc_thread_recv_status_ok(struct stratix10_svc_data *p_data,
>> case COMMAND_RECONFIG_STATUS:
>> cb_data->status = BIT(SVC_STATUS_RECONFIG_COMPLETED);
>> break;
>> + case COMMAND_RSU_UPDATE:
>> + cb_data->status = BIT(SVC_STATUS_RSU_OK);
>> + break;
>> default:
>> pr_warn("it shouldn't happen\n");
>> break;
>> @@ -373,6 +376,16 @@ static int svc_normal_to_secure_thread(void *data)
>> a1 = 0;
>> a2 = 0;
>> break;
>> + case COMMAND_RSU_STATUS:
>> + a0 = INTEL_SIP_SMC_RSU_STATUS;
>> + a1 = 0;
>> + a2 = 0;
>> + break;
>> + case COMMAND_RSU_UPDATE:
>> + a0 = INTEL_SIP_SMC_RSU_UPDATE;
>> + a1 = pdata->arg[0];
>> + a2 = 0;
>> + break;
>> default:
>> pr_warn("it shouldn't happen\n");
>> break;
>> @@ -389,6 +402,19 @@ static int svc_normal_to_secure_thread(void *data)
>> (unsigned int)res.a1, (unsigned int)res.a2);
>> pr_debug(" res.a3=0x%016x\n", (unsigned int)res.a3);
>>
>> + if (pdata->command == COMMAND_RSU_STATUS) {
>> + if (res.a0 == INTEL_SIP_SMC_RSU_ERROR)
>> + cbdata->status = BIT(SVC_STATUS_RSU_ERROR);
>> + else
>> + cbdata->status = BIT(SVC_STATUS_RSU_OK);
>> +
>> + cbdata->kaddr1 = &res;
>> + cbdata->kaddr2 = NULL;
>> + cbdata->kaddr3 = NULL;
>> + pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata);
>> + continue;
>> + }
>> +
>> switch (res.a0) {
>> case INTEL_SIP_SMC_STATUS_OK:
>> svc_thread_recv_status_ok(pdata, cbdata, res);
>> @@ -941,6 +967,11 @@ static int stratix10_svc_drv_probe(struct platform_device *pdev)
>> chans[0].name = SVC_CLIENT_FPGA;
>> spin_lock_init(&chans[0].lock);
>>
>> + chans[1].scl = NULL;
>> + chans[1].ctrl = controller;
>> + chans[1].name = SVC_CLIENT_RSU;
>> + spin_lock_init(&chans[1].lock);
>> +
>> list_add_tail(&controller->node, &svc_ctrl);
>> platform_set_drvdata(pdev, controller);
>>
>> diff --git a/include/linux/firmware/intel/stratix10-smc.h b/include/linux/firmware/intel/stratix10-smc.h
>> index a109e4c..5be5dab 100644
>> --- a/include/linux/firmware/intel/stratix10-smc.h
>> +++ b/include/linux/firmware/intel/stratix10-smc.h
>> @@ -67,6 +67,12 @@
>> *
>> * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR:
>> * There is error during the FPGA configuration process.
>> + *
>> + * INTEL_SIP_SMC_REG_ERROR:
>> + * There is error during a read or write operation of the protected registers.
>> + *
>> + * INTEL_SIP_SMC_RSU_ERROR:
>> + * There is error during a remote status update.
>> */
>> #define INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION 0xFFFFFFFF
>> #define INTEL_SIP_SMC_STATUS_OK 0x0
>> @@ -74,6 +80,7 @@
>> #define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_REJECTED 0x2
>> #define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR 0x4
>> #define INTEL_SIP_SMC_REG_ERROR 0x5
>> +#define INTEL_SIP_SMC_RSU_ERROR 0x7
>>
>> /**
>> * Request INTEL_SIP_SMC_FPGA_CONFIG_START
>> @@ -262,4 +269,44 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
>> #define INTEL_SIP_SMC_REG_UPDATE \
>> INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_UPDATE)
>>
>> +/*
>> + * Request INTEL_SIP_SMC_RSU_STATUS
>> + *
>> + * Request remote status update boot log, call is synchronous.
>> + *
>> + * Call register usage:
>> + * a0 INTEL_SIP_SMC_RSU_STATUS
>> + * a1-7 not used
>> + *
>> + * Return status
>> + * a0: Current Image
>> + * a1: Last Failing Image
>> + * a2: Version | State
>> + * a3: Error details | Error location
>> + *
>> + * Or
>> + *
>> + * a0: INTEL_SIP_SMC_RSU_ERROR
>> + */
>> +#define INTEL_SIP_SMC_FUNCID_RSU_STATUS 11
>> +#define INTEL_SIP_SMC_RSU_STATUS \
>> + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_STATUS)
>> +
>> +/*
>> + * Request INTEL_SIP_SMC_RSU_UPDATE
>> + *
>> + * Request to set the offset of the bitstream to boot after reboot, call
>> + * is synchronous.
>> + *
>> + * Call register usage:
>> + * a0 INTEL_SIP_SMC_RSU_UPDATE
>> + * a1 64bit physical address of the configuration data memory in flash
>> + * a2-7 not used
>> + *
>> + * Return status
>> + * a0 INTEL_SIP_SMC_STATUS_OK
>> + */
>> +#define INTEL_SIP_SMC_FUNCID_RSU_UPDATE 12
>> +#define INTEL_SIP_SMC_RSU_UPDATE \
>> + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_UPDATE)
>> #endif
>> diff --git a/include/linux/firmware/intel/stratix10-svc-client.h b/include/linux/firmware/intel/stratix10-svc-client.h
>> index f2fda7e..e521f17 100644
>> --- a/include/linux/firmware/intel/stratix10-svc-client.h
>> +++ b/include/linux/firmware/intel/stratix10-svc-client.h
>> @@ -10,8 +10,10 @@
>> * Service layer driver supports client names
>> *
>> * fpga: for FPGA configuration
>> + * rsu: for remote status update
>> */
>> #define SVC_CLIENT_FPGA "fpga"
>> +#define SVC_CLIENT_RSU "rsu"
>>
>> /**
>> * Status of the sent command, in bit number
>> @@ -36,6 +38,9 @@
>> *
>> * SVC_COMMAND_STATUS_RECONFIG_ERROR:
>> * Error encountered during FPGA configuration.
>> + *
>> + * SVC_STATUS_RSU_OK:
>> + * Secure firmware accepts the request of remote status update (RSU).
>> */
>> #define SVC_STATUS_RECONFIG_REQUEST_OK 0
>> #define SVC_STATUS_RECONFIG_BUFFER_SUBMITTED 1
>> @@ -43,7 +48,8 @@
>> #define SVC_STATUS_RECONFIG_COMPLETED 3
>> #define SVC_STATUS_RECONFIG_BUSY 4
>> #define SVC_STATUS_RECONFIG_ERROR 5
>> -
>> +#define SVC_STATUS_RSU_OK 6
>> +#define SVC_STATUS_RSU_ERROR 7
>> /**
>> * Flag bit for COMMAND_RECONFIG
>> *
>> @@ -56,9 +62,11 @@
>> /**
>> * Timeout settings for service clients:
>> * timeout value used in Stratix10 FPGA manager driver.
>> + * timeout value used in RSU driver
>> */
>> #define SVC_RECONFIG_REQUEST_TIMEOUT_MS 100
>> #define SVC_RECONFIG_BUFFER_TIMEOUT_MS 240
>> +#define SVC_RSU_REQUEST_TIMEOUT_MS 300
>>
>> struct stratix10_svc_chan;
>>
>> @@ -81,13 +89,21 @@ struct stratix10_svc_chan;
>> * @COMMAND_RECONFIG_STATUS: check the status of the configuration, return
>> * status is SVC_STATUS_RECONFIG_COMPLETED, or SVC_STATUS_RECONFIG_BUSY, or
>> * SVC_STATUS_RECONFIG_ERROR
>> + *
>> + * @COMMAND_RSU_STATUS: request remote system update boot log, return status
>> + * is log data or SVC_STATUS_RSU_ERROR
>> + *
>> + * @COMMAND_RSU_UPDATE: set the offset of the bitstream to boot after reboot,
>> + * return status is SVC_STATUS_RSU_OK or SVC_STATUS_RSU_ERROR
>> */
>> enum stratix10_svc_command_code {
>> COMMAND_NOOP = 0,
>> COMMAND_RECONFIG,
>> COMMAND_RECONFIG_DATA_SUBMIT,
>> COMMAND_RECONFIG_DATA_CLAIM,
>> - COMMAND_RECONFIG_STATUS
>> + COMMAND_RECONFIG_STATUS,
>> + COMMAND_RSU_STATUS,
>> + COMMAND_RSU_UPDATE
>> };
>>
>> /**
>> --
>> 2.7.4
>>
>
> Thanks,
> Moritz
>
Regards,
Richard
Powered by blists - more mailing lists