[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20181108003617.10334-1-grygorii.strashko@ti.com>
Date: Wed, 7 Nov 2018 18:36:12 -0600
From: Grygorii Strashko <grygorii.strashko@...com>
To: "David S. Miller" <davem@...emloft.net>,
Kishon Vijay Abraham I <kishon@...com>
CC: <netdev@...r.kernel.org>, Sekhar Nori <nsekhar@...com>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Tony Lindgren <tony@...mide.com>,
<linux-amlogic@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Antoine Tenart <antoine.tenart@...e-electrons.com>,
Quentin Schulz <quentin.schulz@...tlin.com>,
Vivek Gautam <vivek.gautam@...eaurora.org>,
Maxime Ripard <maxime.ripard@...tlin.com>,
Chen-Yu Tsai <wens@...e.org>, Carlo Caione <carlo@...one.org>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Manu Gautam <mgautam@...eaurora.org>,
Grygorii Strashko <grygorii.strashko@...com>
Subject: [PATCH 0/5] hy: core: rework phy_set_mode to accept phy mode and submode
Hi Kishon, All,
As was discussed in [1] I'm posting series which introduces rework of
phy_set_mode to accept phy mode and submode. I've dropped TI specific patches as
this change is pretty big by itself.
Patch 1 is cumulative change which refactors PHY framework code to
support dual level PHYs mode configuration - PHY mode and PHY submode. It
extends .set_mode() callback to support additional parameter "int submode"
and converts all corresponding PHY drivers to support new .set_mode()
callback declaration.
The new extended PHY API
int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode)
is introduced to support dual level PHYs mode configuration and existing
phy_set_mode() API is converted to macros, so PHY framework consumers do
not need to be changed (~21 matches).
Patches 2-4: Add new PHY's mode to be used by Ethernet PHY interface drivers or
multipurpose PHYs like serdes and convert ocelot-serdes and mvebu-cp110-comphy
PHY drivers to use recently introduced PHY_MODE_ETHERNET and phy_set_mode_ext().
Patch 5 - removes unused, ethernet specific phy modes from enum phy_mode.
[1] https://lkml.org/lkml/2018/10/25/366
Grygorii Strashko (5):
phy: core: rework phy_set_mode to accept phy mode and submode
phy: core: add PHY_MODE_ETHERNET
phy: ocelot-serdes: convert to use eth phy mode and submode
phy: mvebu-cp110-comphy: convert to use eth phy mode and submode
phy: core: clean up unused ethernet specific phy modes
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 21 ++-----
drivers/net/ethernet/mscc/ocelot.c | 9 +--
drivers/phy/allwinner/phy-sun4i-usb.c | 3 +-
drivers/phy/amlogic/phy-meson-gxl-usb2.c | 5 +-
drivers/phy/amlogic/phy-meson-gxl-usb3.c | 5 +-
drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 83 ++++++++++++++-----------
drivers/phy/mediatek/phy-mtk-tphy.c | 2 +-
drivers/phy/mediatek/phy-mtk-xsphy.c | 2 +-
drivers/phy/mscc/phy-ocelot-serdes.c | 16 +++--
drivers/phy/phy-core.c | 6 +-
drivers/phy/qualcomm/phy-qcom-qmp.c | 3 +-
drivers/phy/qualcomm/phy-qcom-qusb2.c | 3 +-
drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c | 3 +-
drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c | 3 +-
drivers/phy/qualcomm/phy-qcom-usb-hs.c | 3 +-
drivers/phy/ti/phy-da8xx-usb.c | 3 +-
drivers/phy/ti/phy-tusb1210.c | 2 +-
include/linux/phy/phy.h | 18 +++---
18 files changed, 100 insertions(+), 90 deletions(-)
--
2.10.5
Powered by blists - more mailing lists