| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20181108083754.1746-10-peter.ujfalusi@ti.com>
Date: Thu, 8 Nov 2018 10:37:54 +0200
From: Peter Ujfalusi <peter.ujfalusi@...com>
To: Mark Brown <broonie@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
<jarkko.nikula@...mer.com>, <tony@...mide.com>, <nsekhar@...com>
CC: <alsa-devel@...a-project.org>, <linux-omap@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <jsarha@...com>
Subject: [RFC 9/9] ASoC: ti: Kconfig: Remove the deprecated options
We no longer have these options used anywhere.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@...com>
---
sound/soc/ti/Kconfig | 159 -------------------------------------------
1 file changed, 159 deletions(-)
diff --git a/sound/soc/ti/Kconfig b/sound/soc/ti/Kconfig
index 698810c770f0..4bf3c15d4e51 100644
--- a/sound/soc/ti/Kconfig
+++ b/sound/soc/ti/Kconfig
@@ -46,14 +46,10 @@ config SND_SOC_OMAP_DMIC
Say Y or M here if you want to have support for DMIC IP found in
OMAP4 and OMAP5.
-config SND_OMAP_SOC_MCBSP
- tristate
-
config SND_SOC_OMAP_MCBSP
tristate "Multichannel Buffered Serial Port (McBSP) support"
depends on ARCH_OMAP || ARCH_OMAP1 || COMPILE_TEST
select SND_SOC_TI_SDMA_PCM
- select SND_OMAP_SOC_MCBSP
help
Say Y or M here if you want to have support for McBSP IP found in
Texas Instruments OMAP1/2/3/4/5 SoCs.
@@ -209,160 +205,5 @@ config SND_SOC_DM365_VOICE_CODEC
Say Y if you want to add support for SoC On-chip voice codec
endchoice
-menu "Deprecated kconfig options:"
-
-config SND_AM33XX_SOC_EVM
- tristate "SoC Audio for the AM33XX chip based boards"
- depends on SOC_AM33XX && I2C
- select SND_SOC_TLV320AIC3X
- select SND_SOC_DAVINCI_MCASP
- help
- Say Y or M if you want to add support for SoC audio on AM33XX
- boards using McASP and TLV320AIC3X codec. For example AM335X-EVM,
- AM335X-EVMSK, and BeagelBone with AudioCape boards have this
- setup.
-
-config SND_DAVINCI_SOC_EVM
- tristate "SoC Audio support for DaVinci DM6446, DM355 or DM365 EVM"
- depends on ARCH_DAVINCI && I2C
- depends on MACH_DAVINCI_EVM || MACH_DAVINCI_DM355_EVM || MACH_DAVINCI_DM365_EVM
- select SND_SOC_DAVINCI_EVM
- help
- Say Y if you want to add support for SoC audio on TI
- DaVinci DM6446, DM355 or DM365 EVM platforms.
-
-choice
- prompt "DM365 codec select"
- depends on SND_DAVINCI_SOC_EVM
- depends on MACH_DAVINCI_DM365_EVM
-
-config SND_DM365_AIC3X_CODEC
- tristate "Audio Codec - AIC3101"
- select SND_SOC_DM365_AIC3X_CODEC
- help
- Say Y if you want to add support for AIC3101 audio codec
-
-config SND_DM365_VOICE_CODEC
- tristate "Voice Codec - CQ93VC"
- select SND_SOC_DM365_VOICE_CODEC
- help
- Say Y if you want to add support for SoC On-chip voice codec
-endchoice
-
-config SND_DM6467_SOC_EVM
- tristate "SoC Audio support for DaVinci DM6467 EVM"
- depends on MACH_DAVINCI_DM6467_EVM && I2C
- select SND_SOC_DAVINCI_EVM
-
- help
- Say Y if you want to add support for SoC audio on TI
-
-config SND_DA830_SOC_EVM
- tristate "SoC Audio support for DA830/OMAP-L137 EVM"
- depends on MACH_DAVINCI_DA830_EVM && I2C
- select SND_SOC_DAVINCI_EVM
-
- help
- Say Y if you want to add support for SoC audio on TI
- DA830/OMAP-L137 EVM
-
-config SND_DA850_SOC_EVM
- tristate "SoC Audio support for DA850/OMAP-L138 EVM"
- depends on MACH_DAVINCI_DA850_EVM && I2C
- select SND_SOC_DAVINCI_EVM
- help
- Say Y if you want to add support for SoC audio on TI
- DA850/OMAP-L138 EVM
-
-config SND_OMAP_SOC_HDMI_AUDIO
- tristate "HDMI audio support for OMAP4+ based SoCs"
- select SND_SOC_OMAP_HDMI
- help
- For HDMI audio to work OMAPDSS HDMI support should be
- enabled.
- The hdmi audio driver implements cpu-dai component using the
- callbacks provided by OMAPDSS and registers the component
- under DSS HDMI device. Omap-pcm is registered for platform
- component also under DSS HDMI device. Dummy codec is used as
- as codec component. The hdmi audio driver implements also
- the card and registers it under its own platform device.
- The device for the driver is registered by OMAPDSS hdmi
- driver.
-
-config SND_OMAP_SOC_N810
- tristate "SoC Audio support for Nokia N810"
- depends on MACH_NOKIA_N810 && I2C
- select SND_SOC_NOKIA_N810
- help
- Say Y if you want to add support for SoC audio on Nokia N810.
-
-config SND_OMAP_SOC_RX51
- tristate "SoC Audio support for Nokia N900 (RX-51)"
- depends on ARM && I2C && GPIOLIB && ARCH_OMAP3
- select SND_SOC_NOKIA_RX51
- help
- Say Y if you want to add support for SoC audio on Nokia N900
- cellphone.
-
-config SND_OMAP_SOC_AMS_DELTA
- tristate "SoC Audio support for Amstrad E3 (Delta) videophone"
- depends on MACH_AMS_DELTA && TTY
- select SND_SOC_OMAP_AMS_DELTA
- help
- Say Y if you want to add support for SoC audio device connected to
- a handset and a speakerphone found on Amstrad E3 (Delta) videophone.
-
- Note that in order to get those devices fully supported, you have to
- build the kernel with standard serial port driver included and
- configured for at least 4 ports. Then, from userspace, you must load
- a line discipline #19 on the modem (ttyS3) serial line. The simplest
- way to achieve this is to install util-linux-ng and use the included
- ldattach utility. This can be started automatically from udev,
- a simple rule like this one should do the trick (it does for me):
- ACTION=="add", KERNEL=="controlC0", \
- RUN+="/usr/sbin/ldattach 19 /dev/ttyS3"
-
-config SND_OMAP_SOC_OSK5912
- tristate "SoC Audio support for omap osk5912"
- depends on MACH_OMAP_OSK && I2C
- select SND_SOC_OMAP_OSK5912
- help
- Say Y if you want to add support for SoC audio on osk5912.
-
-config SND_OMAP_SOC_OMAP_TWL4030
- tristate "SoC Audio support for TI SoC based boards with twl4030 codec"
- depends on TWL4030_CORE
- select SND_SOC_OMAP3_TWL4030
- help
- Say Y if you want to add support for SoC audio on TI SoC based boards
- using twl4030 as c codec. This driver currently supports:
- - Beagleboard or Devkit8000
- - Gumstix Overo or CompuLab CM-T35/CM-T3730
- - IGEP v2
- - OMAP3EVM
- - SDP3430
- - Zoom2
-
-config SND_OMAP_SOC_OMAP_ABE_TWL6040
- tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec"
- depends on TWL6040_CORE && COMMON_CLK
- depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST
- select SND_SOC_OMAP_ABE_TWL6040
- help
- Say Y if you want to add support for SoC audio on OMAP boards using
- ABE and twl6040 codec. This driver currently supports:
- - SDP4430/Blaze boards
- - PandaBoard (4430)
- - PandaBoardES (4460)
- - omap5-uevm (5432)
-
-config SND_OMAP_SOC_OMAP3_PANDORA
- tristate "SoC Audio support for OMAP3 Pandora"
- depends on TWL4030_CORE
- select SND_SOC_OMAP3_PANDORA
- help
- Say Y if you want to add support for SoC audio on the OMAP3 Pandora.
-endmenu
-
endmenu
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Powered by blists - more mailing lists