[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181108175049.7090-19-vkoul@kernel.org>
Date: Thu, 8 Nov 2018 23:20:49 +0530
From: Vinod Koul <vkoul@...nel.org>
To: Andy Gross <andy.gross@...aro.org>,
David Brown <david.brown@...aro.org>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Vinod Koul <vkoul@...nel.org>
Subject: [PATCH v3 18/18] arm64: dts: qcom: pms405: Add pon and pwrkey nodes
PMS405 also features PON block, so add PON and PWRKEY nodes
Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Signed-off-by: Vinod Koul <vkoul@...nel.org>
---
arch/arm64/boot/dts/qcom/pms405.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index 02b758cfd758..a1272a444e02 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -2,6 +2,7 @@
// Copyright (c) 2018, Linaro Limited
#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/input/linux-event-codes.h>
&spmi_bus {
pms405_0: pms405@0 {
@@ -26,6 +27,21 @@
<0 0xcb 0 IRQ_TYPE_NONE>;
};
+ pon@800 {
+ compatible = "qcom,pms405-pon";
+ reg = <0x0800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+ };
+
rtc@...0 {
compatible = "qcom,pm8941-rtc";
reg = <0x6000>;
--
2.14.4
Powered by blists - more mailing lists