linux-kernel - [PATCH v2 4/5] mtd: spi_nor: pass DMA-able buffer to spi_nor_read

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20181109165644.30534-5-tudor.ambarus@microchip.com>
Date:   Fri, 9 Nov 2018 16:56:54 +0000
From:   <Tudor.Ambarus@...rochip.com>
To:     <boris.brezillon@...tlin.com>, <marek.vasut@...il.com>,
        <dwmw2@...radead.org>, <computersforpeace@...il.com>,
        <richard@....at>
CC:     <linux-mtd@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
        <yogeshnarayan.gaur@....com>, <cyrille.pitchen@...ev4u.fr>,
        <Tudor.Ambarus@...rochip.com>
Subject: [PATCH v2 4/5] mtd: spi_nor: pass DMA-able buffer to
 spi_nor_read_raw()

spi_nor_read_raw() calls nor->read() which might be implemented
by the m25p80 driver. m25p80 uses the spi-mem layer which requires
DMA-able in/out buffers. Pass kmalloc'ed dma buffer to spi_nor_read_raw().

Fixes: b038e8e3be72 ("mtd: spi-nor: parse SFDP Sector Map Parameter Table")
Signed-off-by: Tudor Ambarus <tudor.ambarus@...rochip.com>
---
v2: drop GFP_DMA, rename buf, add comment

 drivers/mtd/spi-nor/spi-nor.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 04a1c5b825e6..458ca8321999 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2161,7 +2161,7 @@ spi_nor_set_pp_settings(struct spi_nor_pp_command *pp,
  * @nor:	pointer to a 'struct spi_nor'
  * @addr:	offset in the serial flash memory
  * @len:	number of bytes to read
- * @buf:	buffer where the data is copied into
+ * @buf:	buffer where the data is copied into (dma-safe memory)
  *
  * Return: 0 on success, -errno otherwise.
  */
@@ -2868,11 +2868,17 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
 					 u8 smpt_len)
 {
 	const u32 *ret;
+	u8 *buf;
 	u32 addr;
 	int err;
 	u8 i;
 	u8 addr_width, read_opcode, read_dummy;
-	u8 read_data_mask, data_byte, map_id;
+	u8 read_data_mask, map_id;
+
+	/* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */
+	buf = kmalloc(sizeof(*buf), GFP_KERNEL);
+	if (!buf)
+		return ERR_PTR(-ENOMEM);
 
 	addr_width = nor->addr_width;
 	read_dummy = nor->read_dummy;
@@ -2890,7 +2896,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
 		nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]);
 		addr = smpt[i + 1];
 
-		err = spi_nor_read_raw(nor, addr, 1, &data_byte);
+		err = spi_nor_read_raw(nor, addr, 1, buf);
 		if (err) {
 			ret = ERR_PTR(err);
 			goto out;
@@ -2900,7 +2906,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
 		 * Build an index value that is used to select the Sector Map
 		 * Configuration that is currently in use.
 		 */
-		map_id = map_id << 1 | !!(data_byte & read_data_mask);
+		map_id = map_id << 1 | !!(*buf & read_data_mask);
 	}
 
 	/*
@@ -2931,6 +2937,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
 
 	/* fall through */
 out:
+	kfree(buf);
 	nor->addr_width = addr_width;
 	nor->read_dummy = read_dummy;
 	nor->read_opcode = read_opcode;
-- 
2.9.4