| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 11 Nov 2018 12:59:41 +0800
From: Leo Yan <leo.yan@...aro.org>
To: Arnaldo Carvalho de Melo <acme@...nel.org>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
Alexander Shishkin <alexander.shishkin@...ux.intel.com>,
Jiri Olsa <jolsa@...hat.com>,
Namhyung Kim <namhyung@...nel.org>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Mike Leach <mike.leach@...aro.org>,
Robert Walker <robert.walker@....com>,
Al Grant <Al.Grant@....com>,
Coresight ML <coresight@...ts.linaro.org>
Cc: Leo Yan <leo.yan@...aro.org>
Subject: [PATCH v1 3/5] perf cs-etm: Support for NO_SYNC packet
As described in OpenCSD (CoreSight decoder lib), in the decoding stream
it includes one trace element with type OCSD_GEN_TRC_ELEM_NO_SYNC; the
element indicates 'either at start of decode, or after overflow / bad
packet', we should take it as a signal for the tracing off and this will
cause tracing discontinuity. From the trace dump with 'perf script',
sometimes the element OCSD_GEN_TRC_ELEM_NO_SYNC collaborates with
element OCSD_GEN_TRC_ELEM_TRACE_ON to show the tracing flow have been
turned off and on, in this case the cs-etm code has handled TRACE_ON
packet well so we observe the tracing discontinuity; but in another case
it only inserts the element OCSD_GEN_TRC_ELEM_NO_SYNC into instructions
packets, we miss to handle the case if has only standalone NO_SYNC
element and users cannot receive the info for tracing discontinuity.
This patch introduces new type CS_ETM_TRACE_OFF to generate packet for
receiving element OCSD_GEN_TRC_ELEM_NO_SYNC from decoder; when generate
sample, CS_ETM_TRACE_OFF packet has almost the same behaviour with
CS_ETM_TRACE_ON packet: both of them invokes cs_etm__flush() to generate
samples for the previous instructions packet, and in cs_etm__sample() it
also needs to generate samples if TRACE_OFF packet is followed by one
sequential instructions packet. This patch also converts the address to
0 for TRACE_OFF packet, this is same with TRACE_ON packet as well.
Signed-off-by: Leo Yan <leo.yan@...aro.org>
---
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c | 10 ++++++++++
tools/perf/util/cs-etm-decoder/cs-etm-decoder.h | 7 ++++---
tools/perf/util/cs-etm.c | 15 +++++++++++----
3 files changed, 25 insertions(+), 7 deletions(-)
diff --git a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c
index 5efb616..9d52727 100644
--- a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c
+++ b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c
@@ -369,6 +369,14 @@ cs_etm_decoder__buffer_range(struct cs_etm_decoder *decoder,
}
static ocsd_datapath_resp_t
+cs_etm_decoder__buffer_trace_off(struct cs_etm_decoder *decoder,
+ const uint8_t trace_chan_id)
+{
+ return cs_etm_decoder__buffer_packet(decoder, trace_chan_id,
+ CS_ETM_TRACE_OFF);
+}
+
+static ocsd_datapath_resp_t
cs_etm_decoder__buffer_trace_on(struct cs_etm_decoder *decoder,
const uint8_t trace_chan_id)
{
@@ -389,6 +397,8 @@ static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer(
case OCSD_GEN_TRC_ELEM_UNKNOWN:
break;
case OCSD_GEN_TRC_ELEM_NO_SYNC:
+ resp = cs_etm_decoder__buffer_trace_off(decoder,
+ trace_chan_id);
decoder->trace_on = false;
break;
case OCSD_GEN_TRC_ELEM_TRACE_ON:
diff --git a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.h b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.h
index 9351bd1..a38c97c 100644
--- a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.h
+++ b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.h
@@ -23,9 +23,10 @@ struct cs_etm_buffer {
};
enum cs_etm_sample_type {
- CS_ETM_EMPTY = 0,
- CS_ETM_RANGE = 1 << 0,
- CS_ETM_TRACE_ON = 1 << 1,
+ CS_ETM_EMPTY = 0,
+ CS_ETM_RANGE = 1 << 0,
+ CS_ETM_TRACE_ON = 1 << 1,
+ CS_ETM_TRACE_OFF = 1 << 2,
};
enum cs_etm_isa {
diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
index f4fa877..2a0cef9 100644
--- a/tools/perf/util/cs-etm.c
+++ b/tools/perf/util/cs-etm.c
@@ -517,8 +517,9 @@ static inline int cs_etm__t32_instr_size(struct cs_etm_queue *etmq,
static inline u64 cs_etm__first_executed_instr(struct cs_etm_packet *packet)
{
- /* Returns 0 for the CS_ETM_TRACE_ON packet */
- if (packet->sample_type == CS_ETM_TRACE_ON)
+ /* Returns 0 for TRACE_ON and TRACE_OFF packets */
+ if (packet->sample_type == CS_ETM_TRACE_ON ||
+ packet->sample_type == CS_ETM_TRACE_OFF)
return 0;
return packet->start_addr;
@@ -527,8 +528,9 @@ static inline u64 cs_etm__first_executed_instr(struct cs_etm_packet *packet)
static inline
u64 cs_etm__last_executed_instr(const struct cs_etm_packet *packet)
{
- /* Returns 0 for the CS_ETM_TRACE_ON packet */
- if (packet->sample_type == CS_ETM_TRACE_ON)
+ /* Returns 0 for TRACE_ON and TRACE_OFF packets */
+ if (packet->sample_type == CS_ETM_TRACE_ON ||
+ packet->sample_type == CS_ETM_TRACE_OFF)
return 0;
return packet->end_addr - packet->last_instr_size;
@@ -930,6 +932,10 @@ static int cs_etm__sample(struct cs_etm_queue *etmq)
if (etmq->prev_packet->sample_type == CS_ETM_TRACE_ON)
generate_sample = true;
+ /* Generate sample for tracing off packet */
+ if (etmq->prev_packet->sample_type == CS_ETM_TRACE_OFF)
+ generate_sample = true;
+
/* Generate sample for branch taken packet */
if (etmq->prev_packet->sample_type == CS_ETM_RANGE &&
etmq->prev_packet->last_instr_taken_branch)
@@ -1085,6 +1091,7 @@ static int cs_etm__run_decoder(struct cs_etm_queue *etmq)
cs_etm__sample(etmq);
break;
case CS_ETM_TRACE_ON:
+ case CS_ETM_TRACE_OFF:
/*
* Discontinuity in trace, flush
* previous branch stack
--
2.7.4
Powered by blists - more mailing lists