linux-kernel - RE: [PATCH V1 1/4] ARM: dts: imx6sx: Add flexcan stop mode wakeup support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Mon, 12 Nov 2018 01:58:35 +0000
From:   Joakim Zhang <qiangqing.zhang@....com>
To:     Shawn Guo <shawnguo@...nel.org>
CC:     "s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
        "kernel@...gutronix.de" <kernel@...gutronix.de>,
        Fabio Estevam <fabio.estevam@....com>,
        dl-linux-imx <linux-imx@....com>,
        "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "A.s. Dong" <aisheng.dong@....com>
Subject: RE: [PATCH V1 1/4] ARM: dts: imx6sx: Add flexcan stop mode wakeup
 support


> -----Original Message-----
> From: Shawn Guo <shawnguo@...nel.org>
> Sent: 2018年11月4日 15:40
> To: Joakim Zhang <qiangqing.zhang@....com>
> Cc: s.hauer@...gutronix.de; kernel@...gutronix.de; Fabio Estevam
> <fabio.estevam@....com>; dl-linux-imx <linux-imx@....com>;
> robh+dt@...nel.org; linux-arm-kernel@...ts.infradead.org;
> devicetree@...r.kernel.org; linux-kernel@...r.kernel.org; A.s. Dong
> <aisheng.dong@....com>
> Subject: Re: [PATCH V1 1/4] ARM: dts: imx6sx: Add flexcan stop mode wakeup
> support
> 
> On Tue, Oct 23, 2018 at 05:30:44AM +0000, Joakim Zhang wrote:
> > From: Dong Aisheng <aisheng.dong@....com>
> >
> > Add stop-mode property which is required by stop mode wakeup feature.
> >
> > Signed-off-by: Dong Aisheng <aisheng.dong@....com>
> > Signed-off-by: Joakim Zhang <qiangqing.zhang@....com>
> > ---
> >  arch/arm/boot/dts/imx6sx.dtsi | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx6sx.dtsi
> > b/arch/arm/boot/dts/imx6sx.dtsi index 844caa39364f..3f459d6da7fc
> > 100644
> > --- a/arch/arm/boot/dts/imx6sx.dtsi
> > +++ b/arch/arm/boot/dts/imx6sx.dtsi
> > @@ -448,6 +448,7 @@
> >  				clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
> >  					 <&clks IMX6SX_CLK_CAN1_SERIAL>;
> >  				clock-names = "ipg", "per";
> > +				stop-mode = <&gpr 0x10 1 0x10 17>;
> 
> Is it supported by upstream?  I cannot find this property in ether flexcan
> bindings doc or kernel driver.
> 
> Shawn

Hi Shawn,
This property has been reviewed by maintainer in flexcan bindings and kernel driver has sent to review.

Best Regards,
Joakim Zhang

> >  				status = "disabled";
> >  			};
> >
> > @@ -458,6 +459,7 @@
> >  				clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
> >  					 <&clks IMX6SX_CLK_CAN2_SERIAL>;
> >  				clock-names = "ipg", "per";
> > +				stop-mode = <&gpr 0x10 2 0x10 18>;
> >  				status = "disabled";
> >  			};
> >
> > --
> > 2.17.1
> >