[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181112080557.22698-2-bjorn.andersson@linaro.org>
Date: Mon, 12 Nov 2018 00:05:55 -0800
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Andy Gross <andy.gross@...aro.org>,
David Brown <david.brown@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 1/3] dt-bindings: soc: qcom: Add AOSS QMP binding
Add binding for the QMP based side-channel communication mechanism to
the AOSS, which is used to control resources not exposed through the
RPMh interface.
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
.../bindings/soc/qcom/qcom,aoss-qmp.txt | 63 +++++++++++++++++++
include/dt-bindings/power/qcom-aoss-qmp.h | 15 +++++
2 files changed, 78 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
create mode 100644 include/dt-bindings/power/qcom-aoss-qmp.h
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
new file mode 100644
index 000000000000..e3c8cb4372f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
@@ -0,0 +1,63 @@
+Qualcomm Always-On Subsystem side channel binding
+
+This binding describes the hardware component responsible for side channel
+requests to the always-on subsystem (AOSS), used for certain power management
+requests that is not handled by the standard RPMh interface. Each client in the
+SoC has it's own block of message RAM and IRQ for communication with the AOSS.
+The protocol used to communicate in the message RAM is known as QMP.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be "qcom,sdm845-aoss-qmp"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: the base address and size of the message RAM for this
+ client's communication with the AOSS
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the AOSS message IRQ for this client
+
+- mboxes:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to the mailbox representing the outgoing doorbell
+ in APCS for this client, as described in mailbox/mailbox.txt
+
+= AOSS Power-domains
+The AOSS side channel exposes control over a set of resources, used to control
+a set of debug related clocks and to affect the low power state of resources
+related to the secondary subsystems. These resources are described as a set of
+power-domains in a subnode of hte AOSS side channel node.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be "qcom,sdm845-aoss-qmp-pd"
+
+- #power-domain-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 1
+
+= EXAMPLE
+
+The following example represents the AOSS side-channel message RAM and the
+mechanism exposing the power-domains, as found in SDM845.
+
+ aoss_qmp: qmp@...0000 {
+ compatible = "qcom,sdm845-aoss-qmp";
+ reg = <0x0c300000 0x100000>;
+ interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apss_shared 0>;
+
+ aoss_qmp_pd: power-controller {
+ compatible = "qcom,sdm845-aoss-qmp-pd";
+ #power-domain-cells = <1>;
+ };
+ };
diff --git a/include/dt-bindings/power/qcom-aoss-qmp.h b/include/dt-bindings/power/qcom-aoss-qmp.h
new file mode 100644
index 000000000000..7d8ac1a4f90c
--- /dev/null
+++ b/include/dt-bindings/power/qcom-aoss-qmp.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018, Linaro Ltd. */
+
+#ifndef __DT_BINDINGS_POWER_QCOM_AOSS_QMP_H
+#define __DT_BINDINGS_POWER_QCOM_AOSS_QMP_H
+
+#define AOSS_QMP_QDSS_CLK 0
+#define AOSS_QMP_LS_CDSP 1
+#define AOSS_QMP_LS_LPASS 2
+#define AOSS_QMP_LS_MODEM 3
+#define AOSS_QMP_LS_SLPI 4
+#define AOSS_QMP_LS_SPSS 5
+#define AOSS_QMP_LS_VENUS 6
+
+#endif
--
2.18.0
Powered by blists - more mailing lists