linux-kernel - [PATCH 15/34] powerpc/dart: use the generic iommu bypass code

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181114082314.8965-16-hch@lst.de>
Date:   Wed, 14 Nov 2018 09:22:55 +0100
From:   Christoph Hellwig <hch@....de>
To:     Benjamin Herrenschmidt <benh@...nel.crashing.org>,
        Paul Mackerras <paulus@...ba.org>,
        Michael Ellerman <mpe@...erman.id.au>
Cc:     linuxppc-dev@...ts.ozlabs.org, iommu@...ts.linux-foundation.org,
        linux-mm@...ck.org, linux-arch@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH 15/34] powerpc/dart: use the generic iommu bypass code

Use the generic iommu bypass code instead of overriding set_dma_mask.

Signed-off-by: Christoph Hellwig <hch@....de>
---
 arch/powerpc/sysdev/dart_iommu.c | 45 +++++++++++---------------------
 1 file changed, 15 insertions(+), 30 deletions(-)

diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 283ce04c5844..2681a19347ba 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -360,13 +360,6 @@ static void iommu_table_dart_setup(void)
 	set_bit(iommu_table_dart.it_size - 1, iommu_table_dart.it_map);
 }
 
-static void pci_dma_dev_setup_dart(struct pci_dev *dev)
-{
-	if (dart_is_u4)
-		set_dma_offset(&dev->dev, DART_U4_BYPASS_BASE);
-	set_iommu_table_base(&dev->dev, &iommu_table_dart);
-}
-
 static void pci_dma_bus_setup_dart(struct pci_bus *bus)
 {
 	if (!iommu_table_dart_inited) {
@@ -390,27 +383,16 @@ static bool dart_device_on_pcie(struct device *dev)
 	return false;
 }
 
-static int dart_dma_set_mask(struct device *dev, u64 dma_mask)
+static void pci_dma_dev_setup_dart(struct pci_dev *dev)
 {
-	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
-		return -EIO;
-
-	/* U4 supports a DART bypass, we use it for 64-bit capable
-	 * devices to improve performances. However, that only works
-	 * for devices connected to U4 own PCIe interface, not bridged
-	 * through hypertransport. We need the device to support at
-	 * least 40 bits of addresses.
-	 */
-	if (dart_device_on_pcie(dev) && dma_mask >= DMA_BIT_MASK(40)) {
-		dev_info(dev, "Using 64-bit DMA iommu bypass\n");
-		set_dma_ops(dev, &dma_nommu_ops);
-	} else {
-		dev_info(dev, "Using 32-bit DMA via iommu\n");
-		set_dma_ops(dev, &dma_iommu_ops);
-	}
+	if (dart_is_u4 && dart_device_on_pcie(&dev->dev))
+		set_dma_offset(&dev->dev, DART_U4_BYPASS_BASE);
+	set_iommu_table_base(&dev->dev, &iommu_table_dart);
+}
 
-	*dev->dma_mask = dma_mask;
-	return 0;
+static bool iommu_bypass_supported_dart(struct pci_dev *dev, u64 mask)
+{
+	return dart_is_u4 && dart_device_on_pcie(&dev->dev);
 }
 
 void __init iommu_init_early_dart(struct pci_controller_ops *controller_ops)
@@ -430,12 +412,15 @@ void __init iommu_init_early_dart(struct pci_controller_ops *controller_ops)
 	if (dart_init(dn) != 0)
 		return;
 
-	/* Setup bypass if supported */
-	if (dart_is_u4)
-		ppc_md.dma_set_mask = dart_dma_set_mask;
-
+	/*
+	 * U4 supports a DART bypass, we use it for 64-bit capable devices to
+	 * improve performance.  However, that only works for devices connected
+	 * to the U4 own PCIe interface, not bridged through hypertransport.
+	 * We need the device to support at least 40 bits of addresses.
+	 */
 	controller_ops->dma_dev_setup = pci_dma_dev_setup_dart;
 	controller_ops->dma_bus_setup = pci_dma_bus_setup_dart;
+	controller_ops->iommu_bypass_supported = iommu_bypass_supported_dart;
 
 	/* Setup pci_dma ops */
 	set_pci_dma_ops(&dma_iommu_ops);
-- 
2.19.1