| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <75ca31ca-82f4-c9e9-0d73-29fde405c47c@baylibre.com>
Date: Wed, 14 Nov 2018 14:17:14 +0100
From: Neil Armstrong <narmstrong@...libre.com>
To: khilman@...libre.com
Cc: linux-amlogic@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 0/3] Add Amlogic Meson GX SoC Clock Measure Driver
On 14/11/2018 14:16, Neil Armstrong wrote:
> The Amlogic Meson GX SoCs embeds a clock measurer IP to measure the internal
> clocks frequencyies.
> The precision is determined by stepping into the divider until the counter
> overflows.
> The debugfs slows a pretty summary and each clock can be measured
> individually aswell.
>
> Thsi patchset includes the dt-bindings, driver and the DT node added to the
> meson-gx dtsi.
>
> Changes since v1 at [1]:
> - fixed clock names
> - added summary in debugfs and moved indivudual clocks into a subdirectory
> - added the GX table to the match data
>
> Neil Armstrong (3):
> dt-bindings: amlogic: Add Internal Clock Measurer bindings
> soc: amlogic: Add Meson GX Clock Measure driver
> ARM64: dts: meson-gx: Add Internal Clock Measurer node
>
> .../bindings/soc/amlogic/clk-measure.txt | 15 +
> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 5 +
> drivers/soc/amlogic/Kconfig | 8 +
> drivers/soc/amlogic/Makefile | 1 +
> drivers/soc/amlogic/meson-gx-clk-measure.c | 293 ++++++++++++++++++
> 5 files changed, 322 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt
> create mode 100644 drivers/soc/amlogic/meson-gx-clk-measure.c
>
For example, the debugfs summary looks like :
# cat /sys/kernel/debug/meson-clk-msr/measure_summary
clock rate precision
---------------------------------------------
ring_osc_out_ee_0 0 +/-3125Hz
ring_osc_out_ee_1 0 +/-3125Hz
ring_osc_out_ee_2 0 +/-3125Hz
a53_ring_osc 0 +/-3125Hz
gp0_pll 0 +/-3125Hz
enci 26998438 +/-3125Hz
clk81 166661458 +/-5208Hz
encp 0 +/-3125Hz
encl 0 +/-3125Hz
vdac 26998438 +/-3125Hz
rgmii_tx 0 +/-3125Hz
pdm 0 +/-3125Hz
amclk 0 +/-3125Hz
fec_0 0 +/-3125Hz
fec_1 0 +/-3125Hz
fec_2 0 +/-3125Hz
sys_pll_div16 0 +/-3125Hz
sys_cpu_div16 0 +/-3125Hz
hdmitx_sys 24000000 +/-3125Hz
rtc_osc_out 32813 +/-3125Hz
i2s_in_src0 0 +/-3125Hz
eth_phy_ref 0 +/-3125Hz
hdmi_todig 0 +/-3125Hz
sc_int 0 +/-3125Hz
sar_adc 1195313 +/-3125Hz
mpll_test_out 0 +/-3125Hz
vdec 0 +/-3125Hz
mali 0 +/-3125Hz
hdmi_tx_pixel 0 +/-3125Hz
i958 0 +/-3125Hz
vdin_meas 1484656250 +/-62500Hz
pcm_sclk 0 +/-3125Hz
pcm_mclk 0 +/-3125Hz
eth_rx_or_rmii 50000000 +/-3125Hz
mp0_out 0 +/-3125Hz
fclk_div5 0 +/-3125Hz
pwm_b 24000000 +/-3125Hz
pwm_a 0 +/-3125Hz
vpu 666625000 +/-20833Hz
ddr_dpll_pt 0 +/-3125Hz
mp1_out 0 +/-3125Hz
mp2_out 0 +/-3125Hz
mp3_out 0 +/-3125Hz
nand_core 24000000 +/-3125Hz
sd_emmc_b 0 +/-3125Hz
sd_emmc_a 0 +/-3125Hz
vid_pll_div_out 1484843750 +/-62500Hz
cci 0 +/-3125Hz
wave420l_c 0 +/-3125Hz
wave420l_b 0 +/-3125Hz
hcodec 0 +/-3125Hz
alt_32k 0 +/-3125Hz
gpio_msr 0 +/-3125Hz
hevc 0 +/-3125Hz
vid_lock 0 +/-3125Hz
pwm_f 0 +/-3125Hz
pwm_e 0 +/-3125Hz
pwm_d 23984375 +/-3125Hz
pwm_c 0 +/-3125Hz
aoclkx2_int 0 +/-3125Hz
aoclk_int 0 +/-3125Hz
rng_ring_osc_0 66746875 +/-3125Hz
rng_ring_osc_1 58442188 +/-3125Hz
rng_ring_osc_2 52098438 +/-3125Hz
rng_ring_osc_3 46662500 +/-3125Hz
vapb 249996094 +/-7812Hz
ge2d 249992188 +/-7812Hz
On the AML-S905X-CC board.
Neil
Powered by blists - more mailing lists