| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1542203269-174932-5-git-send-email-john.garry@huawei.com>
Date: Wed, 14 Nov 2018 21:47:48 +0800
From: John Garry <john.garry@...wei.com>
To: <jejb@...ux.vnet.ibm.com>, <martin.petersen@...cle.com>
CC: <hare@...e.com>, <yanaijie@...wei.com>, <linuxarm@...wei.com>,
<linux-kernel@...r.kernel.org>, <linux-scsi@...r.kernel.org>,
<joe@...ches.com>, John Garry <john.garry@...wei.com>
Subject: [PATCH 4/5] scsi: libsas: Drop SAS_DPRINTK() and revise logs levels
Like sas_printk() did previously, SAS_DPRINTK() offers little value now
that libsas logs already have the "sas" prefix through pr_fmt(fmt). So it
can be dropped.
However, after reviewing some logs in libsas, it is noticed that debug
level is too low in many instances.
So this change drops SAS_DPRINTK() and revises some logs to a more
appropriate level. However many stay at debug level, although some
are significantly promoted.
We add -DDEBUG for compilation so that we keep the debug messages by
default, as before.
All the pre-existing checkpatch errors for spanning messages across
multiple lines are untouched.
Finally, all other references to printk() are removed and replaced
with appropriate pr_xxx().
Suggested-by: Joe Perches <joe@...ches.com>
Signed-off-by: John Garry <john.garry@...wei.com>
---
drivers/scsi/libsas/Makefile | 2 +
drivers/scsi/libsas/sas_ata.c | 24 ++--
drivers/scsi/libsas/sas_discover.c | 34 +++---
drivers/scsi/libsas/sas_expander.c | 227 ++++++++++++++++++------------------
drivers/scsi/libsas/sas_init.c | 6 +-
drivers/scsi/libsas/sas_internal.h | 11 +-
drivers/scsi/libsas/sas_port.c | 23 ++--
drivers/scsi/libsas/sas_scsi_host.c | 128 ++++++++++----------
8 files changed, 224 insertions(+), 231 deletions(-)
diff --git a/drivers/scsi/libsas/Makefile b/drivers/scsi/libsas/Makefile
index c1db9027..5d51520 100644
--- a/drivers/scsi/libsas/Makefile
+++ b/drivers/scsi/libsas/Makefile
@@ -32,3 +32,5 @@ libsas-y += sas_init.o \
sas_task.o
libsas-$(CONFIG_SCSI_SAS_ATA) += sas_ata.o
libsas-$(CONFIG_SCSI_SAS_HOST_SMP) += sas_host_smp.o
+
+ccflags-y := -DDEBUG
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 4f6cdf5..640bd0c 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -75,8 +75,8 @@ static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts)
case SAS_OPEN_TO:
case SAS_OPEN_REJECT:
- SAS_DPRINTK("%s: Saw error %d. What to do?\n",
- __func__, ts->stat);
+ pr_warn("%s: Saw error %d. What to do?\n",
+ __func__, ts->stat);
return AC_ERR_OTHER;
case SAM_STAT_CHECK_CONDITION:
@@ -151,8 +151,7 @@ static void sas_ata_task_done(struct sas_task *task)
} else {
ac = sas_to_ata_err(stat);
if (ac) {
- SAS_DPRINTK("%s: SAS error %x\n", __func__,
- stat->stat);
+ pr_warn("%s: SAS error %x\n", __func__, stat->stat);
/* We saw a SAS error. Send a vague error. */
if (!link->sactive) {
qc->err_mask = ac;
@@ -237,7 +236,7 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
ret = i->dft->lldd_execute_task(task, GFP_ATOMIC);
if (ret) {
- SAS_DPRINTK("lldd_execute_task returned: %d\n", ret);
+ pr_debug("lldd_execute_task returned: %d\n", ret);
if (qc->scsicmd)
ASSIGN_SAS_TASK(qc->scsicmd, NULL);
@@ -282,9 +281,9 @@ int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
res = sas_get_report_phy_sata(dev->parent, phy->phy_id,
&dev->sata_dev.rps_resp);
if (res) {
- SAS_DPRINTK("report phy sata to %016llx:0x%x returned "
- "0x%x\n", SAS_ADDR(dev->parent->sas_addr),
- phy->phy_id, res);
+ pr_debug("report phy sata to %016llx:0x%x returned "
+ "0x%x\n", SAS_ADDR(dev->parent->sas_addr),
+ phy->phy_id, res);
return res;
}
memcpy(dev->frame_rcvd, &dev->sata_dev.rps_resp.rps.fis,
@@ -431,8 +430,7 @@ static void sas_ata_internal_abort(struct sas_task *task)
if (task->task_state_flags & SAS_TASK_STATE_ABORTED ||
task->task_state_flags & SAS_TASK_STATE_DONE) {
spin_unlock_irqrestore(&task->task_state_lock, flags);
- SAS_DPRINTK("%s: Task %p already finished.\n", __func__,
- task);
+ pr_debug("%s: Task %p already finished.\n", __func__, task);
goto out;
}
task->task_state_flags |= SAS_TASK_STATE_ABORTED;
@@ -452,7 +450,7 @@ static void sas_ata_internal_abort(struct sas_task *task)
* aborted ata tasks, otherwise we (likely) leak the sas task
* here
*/
- SAS_DPRINTK("%s: Task %p leaked.\n", __func__, task);
+ pr_warn("%s: Task %p leaked.\n", __func__, task);
if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
task->task_state_flags &= ~SAS_TASK_STATE_ABORTED;
@@ -558,7 +556,7 @@ int sas_ata_init(struct domain_device *found_dev)
ata_host = kzalloc(sizeof(*ata_host), GFP_KERNEL);
if (!ata_host) {
- SAS_DPRINTK("ata host alloc failed.\n");
+ pr_err("ata host alloc failed.\n");
return -ENOMEM;
}
@@ -566,7 +564,7 @@ int sas_ata_init(struct domain_device *found_dev)
ap = ata_sas_port_alloc(ata_host, &sata_port_info, shost);
if (!ap) {
- SAS_DPRINTK("ata_sas_port_alloc failed.\n");
+ pr_err("ata_sas_port_alloc failed.\n");
rc = -ENODEV;
goto free_host;
}
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index dde433a..ba468ce 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -128,7 +128,7 @@ static int sas_get_port_device(struct asd_sas_port *port)
SAS_FANOUT_EXPANDER_DEVICE);
break;
default:
- printk("ERROR: Unidentified device type %d\n", dev->dev_type);
+ pr_warn("ERROR: Unidentified device type %d\n", dev->dev_type);
rphy = NULL;
break;
}
@@ -186,10 +186,10 @@ int sas_notify_lldd_dev_found(struct domain_device *dev)
res = i->dft->lldd_dev_found(dev);
if (res) {
- printk("sas: driver on pcidev %s cannot handle "
- "device %llx, error:%d\n",
- dev_name(sas_ha->dev),
- SAS_ADDR(dev->sas_addr), res);
+ pr_warn("sas: driver on pcidev %s cannot handle "
+ "device %llx, error:%d\n",
+ dev_name(sas_ha->dev),
+ SAS_ADDR(dev->sas_addr), res);
}
set_bit(SAS_DEV_FOUND, &dev->state);
kref_get(&dev->kref);
@@ -456,8 +456,8 @@ static void sas_discover_domain(struct work_struct *work)
return;
dev = port->port_dev;
- SAS_DPRINTK("DOING DISCOVERY on port %d, pid:%d\n", port->id,
- task_pid_nr(current));
+ pr_debug("DOING DISCOVERY on port %d, pid:%d\n", port->id,
+ task_pid_nr(current));
switch (dev->dev_type) {
case SAS_END_DEVICE:
@@ -473,12 +473,12 @@ static void sas_discover_domain(struct work_struct *work)
error = sas_discover_sata(dev);
break;
#else
- SAS_DPRINTK("ATA device seen but CONFIG_SCSI_SAS_ATA=N so cannot attach\n");
+ pr_notice("ATA device seen but CONFIG_SCSI_SAS_ATA=N so cannot attach\n");
/* Fall through */
#endif
default:
error = -ENXIO;
- SAS_DPRINTK("unhandled device %d\n", dev->dev_type);
+ pr_err("unhandled device %d\n", dev->dev_type);
break;
}
@@ -495,8 +495,8 @@ static void sas_discover_domain(struct work_struct *work)
sas_probe_devices(port);
- SAS_DPRINTK("DONE DISCOVERY on port %d, pid:%d, result:%d\n", port->id,
- task_pid_nr(current), error);
+ pr_debug("DONE DISCOVERY on port %d, pid:%d, result:%d\n", port->id,
+ task_pid_nr(current), error);
}
static void sas_revalidate_domain(struct work_struct *work)
@@ -510,22 +510,22 @@ static void sas_revalidate_domain(struct work_struct *work)
/* prevent revalidation from finding sata links in recovery */
mutex_lock(&ha->disco_mutex);
if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) {
- SAS_DPRINTK("REVALIDATION DEFERRED on port %d, pid:%d\n",
- port->id, task_pid_nr(current));
+ pr_debug("REVALIDATION DEFERRED on port %d, pid:%d\n",
+ port->id, task_pid_nr(current));
goto out;
}
clear_bit(DISCE_REVALIDATE_DOMAIN, &port->disc.pending);
- SAS_DPRINTK("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id,
- task_pid_nr(current));
+ pr_debug("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id,
+ task_pid_nr(current));
if (ddev && (ddev->dev_type == SAS_FANOUT_EXPANDER_DEVICE ||
ddev->dev_type == SAS_EDGE_EXPANDER_DEVICE))
res = sas_ex_revalidate_domain(ddev);
- SAS_DPRINTK("done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\n",
- port->id, task_pid_nr(current), res);
+ pr_debug("done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\n",
+ port->id, task_pid_nr(current), res);
out:
mutex_unlock(&ha->disco_mutex);
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index fdc8384..9975b00 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -99,17 +99,17 @@ static int smp_execute_task_sg(struct domain_device *dev,
if (res) {
del_timer(&task->slow_task->timer);
- SAS_DPRINTK("executing SMP task failed:%d\n", res);
+ pr_notice("executing SMP task failed:%d\n", res);
break;
}
wait_for_completion(&task->slow_task->completion);
res = -ECOMM;
if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
- SAS_DPRINTK("smp task timed out or aborted\n");
+ pr_notice("smp task timed out or aborted\n");
i->dft->lldd_abort_task(task);
if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
- SAS_DPRINTK("SMP task aborted and not done\n");
+ pr_notice("SMP task aborted and not done\n");
break;
}
}
@@ -134,11 +134,11 @@ static int smp_execute_task_sg(struct domain_device *dev,
task->task_status.stat == SAS_DEVICE_UNKNOWN)
break;
else {
- SAS_DPRINTK("%s: task to dev %016llx response: 0x%x "
- "status 0x%x\n", __func__,
- SAS_ADDR(dev->sas_addr),
- task->task_status.resp,
- task->task_status.stat);
+ pr_notice("%s: task to dev %016llx response: 0x%x "
+ "status 0x%x\n", __func__,
+ SAS_ADDR(dev->sas_addr),
+ task->task_status.resp,
+ task->task_status.stat);
sas_free_task(task);
task = NULL;
}
@@ -347,11 +347,11 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state))
set_bit(DISCE_REVALIDATE_DOMAIN, &dev->port->disc.pending);
- SAS_DPRINTK("%sex %016llx phy%02d:%c:%X attached: %016llx (%s)\n",
- test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state) ? "ata: " : "",
- SAS_ADDR(dev->sas_addr), phy->phy_id,
- sas_route_char(dev, phy), phy->linkrate,
- SAS_ADDR(phy->attached_sas_addr), type);
+ pr_debug("%sex %016llx phy%02d:%c:%X attached: %016llx (%s)\n",
+ test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state) ? "ata: " : "",
+ SAS_ADDR(dev->sas_addr), phy->phy_id,
+ sas_route_char(dev, phy), phy->linkrate,
+ SAS_ADDR(phy->attached_sas_addr), type);
}
/* check if we have an existing attached ata device on this expander phy */
@@ -500,12 +500,12 @@ static int sas_ex_general(struct domain_device *dev)
RG_RESP_SIZE);
if (res) {
- SAS_DPRINTK("RG to ex %016llx failed:0x%x\n",
- SAS_ADDR(dev->sas_addr), res);
+ pr_notice("RG to ex %016llx failed:0x%x\n",
+ SAS_ADDR(dev->sas_addr), res);
goto out;
} else if (rg_resp->result != SMP_RESP_FUNC_ACC) {
- SAS_DPRINTK("RG:ex %016llx returned SMP result:0x%x\n",
- SAS_ADDR(dev->sas_addr), rg_resp->result);
+ pr_debug("RG:ex %016llx returned SMP result:0x%x\n",
+ SAS_ADDR(dev->sas_addr), rg_resp->result);
res = rg_resp->result;
goto out;
}
@@ -513,8 +513,8 @@ static int sas_ex_general(struct domain_device *dev)
ex_assign_report_general(dev, rg_resp);
if (dev->ex_dev.configuring) {
- SAS_DPRINTK("RG: ex %llx self-configuring...\n",
- SAS_ADDR(dev->sas_addr));
+ pr_debug("RG: ex %llx self-configuring...\n",
+ SAS_ADDR(dev->sas_addr));
schedule_timeout_interruptible(5*HZ);
} else
break;
@@ -568,12 +568,12 @@ static int sas_ex_manuf_info(struct domain_device *dev)
res = smp_execute_task(dev, mi_req, MI_REQ_SIZE, mi_resp,MI_RESP_SIZE);
if (res) {
- SAS_DPRINTK("MI: ex %016llx failed:0x%x\n",
- SAS_ADDR(dev->sas_addr), res);
+ pr_notice("MI: ex %016llx failed:0x%x\n",
+ SAS_ADDR(dev->sas_addr), res);
goto out;
} else if (mi_resp[2] != SMP_RESP_FUNC_ACC) {
- SAS_DPRINTK("MI ex %016llx returned SMP result:0x%x\n",
- SAS_ADDR(dev->sas_addr), mi_resp[2]);
+ pr_debug("MI ex %016llx returned SMP result:0x%x\n",
+ SAS_ADDR(dev->sas_addr), mi_resp[2]);
goto out;
}
@@ -836,10 +836,10 @@ static struct domain_device *sas_ex_discover_end_dev(
res = sas_discover_sata(child);
if (res) {
- SAS_DPRINTK("sas_discover_sata() for device %16llx at "
- "%016llx:0x%x returned 0x%x\n",
- SAS_ADDR(child->sas_addr),
- SAS_ADDR(parent->sas_addr), phy_id, res);
+ pr_notice("sas_discover_sata() for device %16llx at "
+ "%016llx:0x%x returned 0x%x\n",
+ SAS_ADDR(child->sas_addr),
+ SAS_ADDR(parent->sas_addr), phy_id, res);
goto out_list_del;
}
} else
@@ -861,16 +861,16 @@ static struct domain_device *sas_ex_discover_end_dev(
res = sas_discover_end_dev(child);
if (res) {
- SAS_DPRINTK("sas_discover_end_dev() for device %16llx "
- "at %016llx:0x%x returned 0x%x\n",
- SAS_ADDR(child->sas_addr),
- SAS_ADDR(parent->sas_addr), phy_id, res);
+ pr_notice("sas_discover_end_dev() for device %16llx "
+ "at %016llx:0x%x returned 0x%x\n",
+ SAS_ADDR(child->sas_addr),
+ SAS_ADDR(parent->sas_addr), phy_id, res);
goto out_list_del;
}
} else {
- SAS_DPRINTK("target proto 0x%x at %016llx:0x%x not handled\n",
- phy->attached_tproto, SAS_ADDR(parent->sas_addr),
- phy_id);
+ pr_notice("target proto 0x%x at %016llx:0x%x not handled\n",
+ phy->attached_tproto, SAS_ADDR(parent->sas_addr),
+ phy_id);
goto out_free;
}
@@ -927,11 +927,11 @@ static struct domain_device *sas_ex_discover_expander(
int res;
if (phy->routing_attr == DIRECT_ROUTING) {
- SAS_DPRINTK("ex %016llx:0x%x:D <--> ex %016llx:0x%x is not "
- "allowed\n",
- SAS_ADDR(parent->sas_addr), phy_id,
- SAS_ADDR(phy->attached_sas_addr),
- phy->attached_phy_id);
+ pr_warn("ex %016llx:0x%x:D <--> ex %016llx:0x%x is not "
+ "allowed\n",
+ SAS_ADDR(parent->sas_addr), phy_id,
+ SAS_ADDR(phy->attached_sas_addr),
+ phy->attached_phy_id);
return NULL;
}
child = sas_alloc_device();
@@ -1038,25 +1038,25 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
ex_phy->attached_dev_type != SAS_FANOUT_EXPANDER_DEVICE &&
ex_phy->attached_dev_type != SAS_EDGE_EXPANDER_DEVICE &&
ex_phy->attached_dev_type != SAS_SATA_PENDING) {
- SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx "
- "phy 0x%x\n", ex_phy->attached_dev_type,
- SAS_ADDR(dev->sas_addr),
- phy_id);
+ pr_warn("unknown device type(0x%x) attached to ex %016llx "
+ "phy 0x%x\n", ex_phy->attached_dev_type,
+ SAS_ADDR(dev->sas_addr),
+ phy_id);
return 0;
}
res = sas_configure_routing(dev, ex_phy->attached_sas_addr);
if (res) {
- SAS_DPRINTK("configure routing for dev %016llx "
- "reported 0x%x. Forgotten\n",
- SAS_ADDR(ex_phy->attached_sas_addr), res);
+ pr_notice("configure routing for dev %016llx "
+ "reported 0x%x. Forgotten\n",
+ SAS_ADDR(ex_phy->attached_sas_addr), res);
sas_disable_routing(dev, ex_phy->attached_sas_addr);
return res;
}
if (sas_ex_join_wide_port(dev, phy_id)) {
- SAS_DPRINTK("Attaching ex phy%d to wide port %016llx\n",
- phy_id, SAS_ADDR(ex_phy->attached_sas_addr));
+ pr_debug("Attaching ex phy%d to wide port %016llx\n",
+ phy_id, SAS_ADDR(ex_phy->attached_sas_addr));
return res;
}
@@ -1067,12 +1067,12 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
break;
case SAS_FANOUT_EXPANDER_DEVICE:
if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) {
- SAS_DPRINTK("second fanout expander %016llx phy 0x%x "
- "attached to ex %016llx phy 0x%x\n",
- SAS_ADDR(ex_phy->attached_sas_addr),
- ex_phy->attached_phy_id,
- SAS_ADDR(dev->sas_addr),
- phy_id);
+ pr_debug("second fanout expander %016llx phy 0x%x "
+ "attached to ex %016llx phy 0x%x\n",
+ SAS_ADDR(ex_phy->attached_sas_addr),
+ ex_phy->attached_phy_id,
+ SAS_ADDR(dev->sas_addr),
+ phy_id);
sas_ex_disable_phy(dev, phy_id);
break;
} else
@@ -1101,9 +1101,8 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
SAS_ADDR(child->sas_addr)) {
ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED;
if (sas_ex_join_wide_port(dev, i))
- SAS_DPRINTK("Attaching ex phy%d to wide port %016llx\n",
- i, SAS_ADDR(ex->ex_phy[i].attached_sas_addr));
-
+ pr_debug("Attaching ex phy%d to wide port %016llx\n",
+ i, SAS_ADDR(ex->ex_phy[i].attached_sas_addr));
}
}
}
@@ -1154,13 +1153,13 @@ static int sas_check_level_subtractive_boundary(struct domain_device *dev)
if (sas_find_sub_addr(child, s2) &&
(SAS_ADDR(sub_addr) != SAS_ADDR(s2))) {
- SAS_DPRINTK("ex %016llx->%016llx-?->%016llx "
- "diverges from subtractive "
- "boundary %016llx\n",
- SAS_ADDR(dev->sas_addr),
- SAS_ADDR(child->sas_addr),
- SAS_ADDR(s2),
- SAS_ADDR(sub_addr));
+ pr_notice("ex %016llx->%016llx-?->%016llx "
+ "diverges from subtractive "
+ "boundary %016llx\n",
+ SAS_ADDR(dev->sas_addr),
+ SAS_ADDR(child->sas_addr),
+ SAS_ADDR(s2),
+ SAS_ADDR(sub_addr));
sas_ex_disable_port(child, s2);
}
@@ -1239,12 +1238,12 @@ static int sas_check_ex_subtractive_boundary(struct domain_device *dev)
else if (SAS_ADDR(sub_sas_addr) !=
SAS_ADDR(phy->attached_sas_addr)) {
- SAS_DPRINTK("ex %016llx phy 0x%x "
- "diverges(%016llx) on subtractive "
- "boundary(%016llx). Disabled\n",
- SAS_ADDR(dev->sas_addr), i,
- SAS_ADDR(phy->attached_sas_addr),
- SAS_ADDR(sub_sas_addr));
+ pr_notice("ex %016llx phy 0x%x "
+ "diverges(%016llx) on subtractive "
+ "boundary(%016llx). Disabled\n",
+ SAS_ADDR(dev->sas_addr), i,
+ SAS_ADDR(phy->attached_sas_addr),
+ SAS_ADDR(sub_sas_addr));
sas_ex_disable_phy(dev, i);
}
}
@@ -1286,13 +1285,13 @@ static int sas_check_eeds(struct domain_device *child,
if (SAS_ADDR(parent->port->disc.fanout_sas_addr) != 0) {
res = -ENODEV;
- SAS_DPRINTK("edge ex %016llx phy S:0x%x <--> edge ex %016llx "
- "phy S:0x%x, while there is a fanout ex %016llx\n",
- SAS_ADDR(parent->sas_addr),
- parent_phy->phy_id,
- SAS_ADDR(child->sas_addr),
- child_phy->phy_id,
- SAS_ADDR(parent->port->disc.fanout_sas_addr));
+ pr_warn("edge ex %016llx phy S:0x%x <--> edge ex %016llx "
+ "phy S:0x%x, while there is a fanout ex %016llx\n",
+ SAS_ADDR(parent->sas_addr),
+ parent_phy->phy_id,
+ SAS_ADDR(child->sas_addr),
+ child_phy->phy_id,
+ SAS_ADDR(parent->port->disc.fanout_sas_addr));
} else if (SAS_ADDR(parent->port->disc.eeds_a) == 0) {
memcpy(parent->port->disc.eeds_a, parent->sas_addr,
SAS_ADDR_SIZE);
@@ -1310,12 +1309,12 @@ static int sas_check_eeds(struct domain_device *child,
;
else {
res = -ENODEV;
- SAS_DPRINTK("edge ex %016llx phy 0x%x <--> edge ex %016llx "
- "phy 0x%x link forms a third EEDS!\n",
- SAS_ADDR(parent->sas_addr),
- parent_phy->phy_id,
- SAS_ADDR(child->sas_addr),
- child_phy->phy_id);
+ pr_warn("edge ex %016llx phy 0x%x <--> edge ex %016llx "
+ "phy 0x%x link forms a third EEDS!\n",
+ SAS_ADDR(parent->sas_addr),
+ parent_phy->phy_id,
+ SAS_ADDR(child->sas_addr),
+ child_phy->phy_id);
}
return res;
@@ -1429,14 +1428,14 @@ static int sas_configure_present(struct domain_device *dev, int phy_id,
goto out;
res = rri_resp[2];
if (res == SMP_RESP_NO_INDEX) {
- SAS_DPRINTK("overflow of indexes: dev %016llx "
- "phy 0x%x index 0x%x\n",
- SAS_ADDR(dev->sas_addr), phy_id, i);
+ pr_warn("overflow of indexes: dev %016llx "
+ "phy 0x%x index 0x%x\n",
+ SAS_ADDR(dev->sas_addr), phy_id, i);
goto out;
} else if (res != SMP_RESP_FUNC_ACC) {
- SAS_DPRINTK("%s: dev %016llx phy 0x%x index 0x%x "
- "result 0x%x\n", __func__,
- SAS_ADDR(dev->sas_addr), phy_id, i, res);
+ pr_notice("%s: dev %016llx phy 0x%x index 0x%x "
+ "result 0x%x\n", __func__,
+ SAS_ADDR(dev->sas_addr), phy_id, i, res);
goto out;
}
if (SAS_ADDR(sas_addr) != 0) {
@@ -1500,9 +1499,9 @@ static int sas_configure_set(struct domain_device *dev, int phy_id,
goto out;
res = cri_resp[2];
if (res == SMP_RESP_NO_INDEX) {
- SAS_DPRINTK("overflow of indexes: dev %016llx phy 0x%x "
- "index 0x%x\n",
- SAS_ADDR(dev->sas_addr), phy_id, index);
+ pr_warn("overflow of indexes: dev %016llx phy 0x%x "
+ "index 0x%x\n",
+ SAS_ADDR(dev->sas_addr), phy_id, index);
}
out:
kfree(cri_req);
@@ -1549,8 +1548,8 @@ static int sas_configure_parent(struct domain_device *parent,
}
if (ex_parent->conf_route_table == 0) {
- SAS_DPRINTK("ex %016llx has self-configuring routing table\n",
- SAS_ADDR(parent->sas_addr));
+ pr_debug("ex %016llx has self-configuring routing table\n",
+ SAS_ADDR(parent->sas_addr));
return 0;
}
@@ -1611,8 +1610,8 @@ static int sas_discover_expander(struct domain_device *dev)
res = sas_expander_discover(dev);
if (res) {
- SAS_DPRINTK("expander %016llx discovery failed(0x%x)\n",
- SAS_ADDR(dev->sas_addr), res);
+ pr_warn("expander %016llx discovery failed(0x%x)\n",
+ SAS_ADDR(dev->sas_addr), res);
goto out_err;
}
@@ -1856,10 +1855,10 @@ static int sas_find_bcast_dev(struct domain_device *dev,
if (phy_id != -1) {
*src_dev = dev;
ex->ex_change_count = ex_change_count;
- SAS_DPRINTK("Expander phy change count has changed\n");
+ pr_info("Expander phy change count has changed\n");
return res;
} else
- SAS_DPRINTK("Expander phys DID NOT change\n");
+ pr_info("Expander phys DID NOT change\n");
}
list_for_each_entry(ch, &ex->children, siblings) {
if (ch->dev_type == SAS_EDGE_EXPANDER_DEVICE || ch->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
@@ -1969,8 +1968,8 @@ static int sas_discover_new(struct domain_device *dev, int phy_id)
struct domain_device *child;
int res;
- SAS_DPRINTK("ex %016llx phy%d new device attached\n",
- SAS_ADDR(dev->sas_addr), phy_id);
+ pr_debug("ex %016llx phy%d new device attached\n",
+ SAS_ADDR(dev->sas_addr), phy_id);
res = sas_ex_phy_discover(dev, phy_id);
if (res)
return res;
@@ -2048,15 +2047,15 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last)
if (ata_dev && phy->attached_dev_type == SAS_SATA_PENDING)
action = ", needs recovery";
- SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter%s\n",
- SAS_ADDR(dev->sas_addr), phy_id, action);
+ pr_debug("ex %016llx phy 0x%x broadcast flutter%s\n",
+ SAS_ADDR(dev->sas_addr), phy_id, action);
return res;
}
/* we always have to delete the old device when we went here */
- SAS_DPRINTK("ex %016llx phy 0x%x replace %016llx\n",
- SAS_ADDR(dev->sas_addr), phy_id,
- SAS_ADDR(phy->attached_sas_addr));
+ pr_info("ex %016llx phy 0x%x replace %016llx\n",
+ SAS_ADDR(dev->sas_addr), phy_id,
+ SAS_ADDR(phy->attached_sas_addr));
sas_unregister_devs_sas_addr(dev, phy_id, last);
return sas_discover_new(dev, phy_id);
@@ -2084,8 +2083,8 @@ static int sas_rediscover(struct domain_device *dev, const int phy_id)
int i;
bool last = true; /* is this the last phy of the port */
- SAS_DPRINTK("ex %016llx phy%d originated BROADCAST(CHANGE)\n",
- SAS_ADDR(dev->sas_addr), phy_id);
+ pr_debug("ex %016llx phy%d originated BROADCAST(CHANGE)\n",
+ SAS_ADDR(dev->sas_addr), phy_id);
if (SAS_ADDR(changed_phy->attached_sas_addr) != 0) {
for (i = 0; i < ex->num_phys; i++) {
@@ -2095,8 +2094,8 @@ static int sas_rediscover(struct domain_device *dev, const int phy_id)
continue;
if (SAS_ADDR(phy->attached_sas_addr) ==
SAS_ADDR(changed_phy->attached_sas_addr)) {
- SAS_DPRINTK("phy%d part of wide port with "
- "phy%d\n", phy_id, i);
+ pr_debug("phy%d part of wide port with "
+ "phy%d\n", phy_id, i);
last = false;
break;
}
@@ -2154,23 +2153,23 @@ void sas_smp_handler(struct bsg_job *job, struct Scsi_Host *shost,
case SAS_FANOUT_EXPANDER_DEVICE:
break;
default:
- printk("%s: can we send a smp request to a device?\n",
+ pr_err("%s: can we send a smp request to a device?\n",
__func__);
goto out;
}
dev = sas_find_dev_by_rphy(rphy);
if (!dev) {
- printk("%s: fail to find a domain_device?\n", __func__);
+ pr_err("%s: fail to find a domain_device?\n", __func__);
goto out;
}
/* do we need to support multiple segments? */
if (job->request_payload.sg_cnt > 1 ||
job->reply_payload.sg_cnt > 1) {
- printk("%s: multiple segments req %u, rsp %u\n",
- __func__, job->request_payload.payload_len,
- job->reply_payload.payload_len);
+ pr_info("%s: multiple segments req %u, rsp %u\n",
+ __func__, job->request_payload.payload_len,
+ job->reply_payload.payload_len);
goto out;
}
diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
index a3c25e2..221340e 100644
--- a/drivers/scsi/libsas/sas_init.c
+++ b/drivers/scsi/libsas/sas_init.c
@@ -128,19 +128,19 @@ int sas_register_ha(struct sas_ha_struct *sas_ha)
error = sas_register_phys(sas_ha);
if (error) {
- printk(KERN_NOTICE "couldn't register sas phys:%d\n", error);
+ pr_notice("couldn't register sas phys:%d\n", error);
return error;
}
error = sas_register_ports(sas_ha);
if (error) {
- printk(KERN_NOTICE "couldn't register sas ports:%d\n", error);
+ pr_notice("couldn't register sas ports:%d\n", error);
goto Undo_phys;
}
error = sas_init_events(sas_ha);
if (error) {
- printk(KERN_NOTICE "couldn't start event thread:%d\n", error);
+ pr_notice("couldn't start event thread:%d\n", error);
goto Undo_ports;
}
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index 257f8ed..f576509 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -38,9 +38,6 @@
#define pr_fmt(fmt) "sas: " fmt
-#define SAS_DPRINTK(fmt, ...) printk(KERN_DEBUG fmt, ## __VA_ARGS__)
-
-
#define TO_SAS_TASK(_scsi_cmd) ((void *)(_scsi_cmd)->host_scribble)
#define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0)
@@ -125,10 +122,10 @@ static inline void sas_smp_host_handler(struct bsg_job *job,
static inline void sas_fail_probe(struct domain_device *dev, const char *func, int err)
{
- SAS_DPRINTK("%s: for %s device %16llx returned %d\n",
- func, dev->parent ? "exp-attached" :
- "direct-attached",
- SAS_ADDR(dev->sas_addr), err);
+ pr_warn("%s: for %s device %16llx returned %d\n",
+ func, dev->parent ? "exp-attached" :
+ "direct-attached",
+ SAS_ADDR(dev->sas_addr), err);
sas_unregister_dev(dev->port, dev);
}
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
index fad23dd3..03fe479 100644
--- a/drivers/scsi/libsas/sas_port.c
+++ b/drivers/scsi/libsas/sas_port.c
@@ -110,9 +110,9 @@ static void sas_form_port(struct asd_sas_phy *phy)
wake_up(&sas_ha->eh_wait_q);
return;
} else {
- SAS_DPRINTK("%s: phy%d belongs to port%d already(%d)!\n",
- __func__, phy->id, phy->port->id,
- phy->port->num_phys);
+ pr_info("%s: phy%d belongs to port%d already(%d)!\n",
+ __func__, phy->id, phy->port->id,
+ phy->port->num_phys);
return;
}
}
@@ -125,8 +125,8 @@ static void sas_form_port(struct asd_sas_phy *phy)
if (*(u64 *) port->sas_addr &&
phy_is_wideport_member(port, phy) && port->num_phys > 0) {
/* wide port */
- SAS_DPRINTK("phy%d matched wide port%d\n", phy->id,
- port->id);
+ pr_debug("phy%d matched wide port%d\n", phy->id,
+ port->id);
break;
}
spin_unlock(&port->phy_list_lock);
@@ -147,8 +147,7 @@ static void sas_form_port(struct asd_sas_phy *phy)
}
if (i >= sas_ha->num_phys) {
- printk(KERN_NOTICE "%s: couldn't find a free port, bug?\n",
- __func__);
+ pr_err("%s: couldn't find a free port, bug?\n", __func__);
spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags);
return;
}
@@ -180,10 +179,10 @@ static void sas_form_port(struct asd_sas_phy *phy)
}
sas_port_add_phy(port->port, phy->phy);
- SAS_DPRINTK("%s added to %s, phy_mask:0x%x (%16llx)\n",
- dev_name(&phy->phy->dev), dev_name(&port->port->dev),
- port->phy_mask,
- SAS_ADDR(port->attached_sas_addr));
+ pr_debug("%s added to %s, phy_mask:0x%x (%16llx)\n",
+ dev_name(&phy->phy->dev), dev_name(&port->port->dev),
+ port->phy_mask,
+ SAS_ADDR(port->attached_sas_addr));
if (port->port_dev)
port->port_dev->pathways = port->num_phys;
@@ -279,7 +278,7 @@ void sas_porte_broadcast_rcvd(struct work_struct *work)
prim = phy->sas_prim;
spin_unlock_irqrestore(&phy->sas_prim_lock, flags);
- SAS_DPRINTK("broadcast received: %d\n", prim);
+ pr_debug("broadcast received: %d\n", prim);
sas_discover_event(phy->port, DISCE_REVALIDATE_DOMAIN);
if (phy->port)
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 3322934..ffdba37 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -93,9 +93,9 @@ static void sas_end_task(struct scsi_cmnd *sc, struct sas_task *task)
hs = DID_ERROR;
break;
case SAS_PROTO_RESPONSE:
- SAS_DPRINTK("LLDD:%s sent SAS_PROTO_RESP for an SSP "
- "task; please report this\n",
- task->dev->port->ha->sas_ha_name);
+ pr_notice("LLDD:%s sent SAS_PROTO_RESP for an SSP "
+ "task; please report this\n",
+ task->dev->port->ha->sas_ha_name);
break;
case SAS_ABORTED_TASK:
hs = DID_ABORT;
@@ -132,12 +132,12 @@ static void sas_scsi_task_done(struct sas_task *task)
if (unlikely(!task)) {
/* task will be completed by the error handler */
- SAS_DPRINTK("task done but aborted\n");
+ pr_debug("task done but aborted\n");
return;
}
if (unlikely(!sc)) {
- SAS_DPRINTK("task_done called with non existing SCSI cmnd!\n");
+ pr_debug("task_done called with non existing SCSI cmnd!\n");
sas_free_task(task);
return;
}
@@ -208,7 +208,7 @@ int sas_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
return 0;
out_free_task:
- SAS_DPRINTK("lldd_execute_task returned: %d\n", res);
+ pr_debug("lldd_execute_task returned: %d\n", res);
ASSIGN_SAS_TASK(cmd, NULL);
sas_free_task(task);
if (res == -SAS_QUEUE_FULL)
@@ -301,40 +301,38 @@ static enum task_disposition sas_scsi_find_task(struct sas_task *task)
to_sas_internal(task->dev->port->ha->core.shost->transportt);
for (i = 0; i < 5; i++) {
- SAS_DPRINTK("%s: aborting task 0x%p\n", __func__, task);
+ pr_notice("%s: aborting task 0x%p\n", __func__, task);
res = si->dft->lldd_abort_task(task);
spin_lock_irqsave(&task->task_state_lock, flags);
if (task->task_state_flags & SAS_TASK_STATE_DONE) {
spin_unlock_irqrestore(&task->task_state_lock, flags);
- SAS_DPRINTK("%s: task 0x%p is done\n", __func__,
- task);
+ pr_debug("%s: task 0x%p is done\n", __func__, task);
return TASK_IS_DONE;
}
spin_unlock_irqrestore(&task->task_state_lock, flags);
if (res == TMF_RESP_FUNC_COMPLETE) {
- SAS_DPRINTK("%s: task 0x%p is aborted\n",
- __func__, task);
+ pr_notice("%s: task 0x%p is aborted\n",
+ __func__, task);
return TASK_IS_ABORTED;
} else if (si->dft->lldd_query_task) {
- SAS_DPRINTK("%s: querying task 0x%p\n",
- __func__, task);
+ pr_notice("%s: querying task 0x%p\n", __func__, task);
res = si->dft->lldd_query_task(task);
switch (res) {
case TMF_RESP_FUNC_SUCC:
- SAS_DPRINTK("%s: task 0x%p at LU\n",
- __func__, task);
+ pr_notice("%s: task 0x%p at LU\n", __func__,
+ task);
return TASK_IS_AT_LU;
case TMF_RESP_FUNC_COMPLETE:
- SAS_DPRINTK("%s: task 0x%p not at LU\n",
- __func__, task);
+ pr_notice("%s: task 0x%p not at LU\n",
+ __func__, task);
return TASK_IS_NOT_AT_LU;
case TMF_RESP_FUNC_FAILED:
- SAS_DPRINTK("%s: task 0x%p failed to abort\n",
- __func__, task);
- return TASK_ABORT_FAILED;
- }
+ pr_notice("%s: task 0x%p failed to abort\n",
+ __func__, task);
+ return TASK_ABORT_FAILED;
+ }
}
}
@@ -350,9 +348,9 @@ static int sas_recover_lu(struct domain_device *dev, struct scsi_cmnd *cmd)
int_to_scsilun(cmd->device->lun, &lun);
- SAS_DPRINTK("eh: device %llx LUN %llx has the task\n",
- SAS_ADDR(dev->sas_addr),
- cmd->device->lun);
+ pr_notice("eh: device %llx LUN %llx has the task\n",
+ SAS_ADDR(dev->sas_addr),
+ cmd->device->lun);
if (i->dft->lldd_abort_task_set)
res = i->dft->lldd_abort_task_set(dev, lun.scsi_lun);
@@ -376,8 +374,8 @@ static int sas_recover_I_T(struct domain_device *dev)
struct sas_internal *i =
to_sas_internal(dev->port->ha->core.shost->transportt);
- SAS_DPRINTK("I_T nexus reset for dev %016llx\n",
- SAS_ADDR(dev->sas_addr));
+ pr_notice("I_T nexus reset for dev %016llx\n",
+ SAS_ADDR(dev->sas_addr));
if (i->dft->lldd_I_T_nexus_reset)
res = i->dft->lldd_I_T_nexus_reset(dev);
@@ -471,9 +469,9 @@ static int sas_queue_reset(struct domain_device *dev, int reset_type,
return SUCCESS;
}
- SAS_DPRINTK("%s reset of %s failed\n",
- reset_type == SAS_DEV_LU_RESET ? "LUN" : "Bus",
- dev_name(&dev->rphy->dev));
+ pr_warn("%s reset of %s failed\n",
+ reset_type == SAS_DEV_LU_RESET ? "LUN" : "Bus",
+ dev_name(&dev->rphy->dev));
return FAILED;
}
@@ -501,7 +499,7 @@ int sas_eh_abort_handler(struct scsi_cmnd *cmd)
if (task)
res = i->dft->lldd_abort_task(task);
else
- SAS_DPRINTK("no task to abort\n");
+ pr_notice("no task to abort\n");
if (res == TMF_RESP_FUNC_SUCC || res == TMF_RESP_FUNC_COMPLETE)
return SUCCESS;
@@ -612,34 +610,34 @@ static void sas_eh_handle_sas_errors(struct Scsi_Host *shost, struct list_head *
spin_unlock_irqrestore(&task->task_state_lock, flags);
if (need_reset) {
- SAS_DPRINTK("%s: task 0x%p requests reset\n",
- __func__, task);
+ pr_notice("%s: task 0x%p requests reset\n",
+ __func__, task);
goto reset;
}
- SAS_DPRINTK("trying to find task 0x%p\n", task);
+ pr_debug("trying to find task 0x%p\n", task);
res = sas_scsi_find_task(task);
switch (res) {
case TASK_IS_DONE:
- SAS_DPRINTK("%s: task 0x%p is done\n", __func__,
+ pr_notice("%s: task 0x%p is done\n", __func__,
task);
sas_eh_finish_cmd(cmd);
continue;
case TASK_IS_ABORTED:
- SAS_DPRINTK("%s: task 0x%p is aborted\n",
- __func__, task);
+ pr_notice("%s: task 0x%p is aborted\n",
+ __func__, task);
sas_eh_finish_cmd(cmd);
continue;
case TASK_IS_AT_LU:
- SAS_DPRINTK("task 0x%p is at LU: lu recover\n", task);
+ pr_info("task 0x%p is at LU: lu recover\n", task);
reset:
tmf_resp = sas_recover_lu(task->dev, cmd);
if (tmf_resp == TMF_RESP_FUNC_COMPLETE) {
- SAS_DPRINTK("dev %016llx LU %llx is "
- "recovered\n",
- SAS_ADDR(task->dev),
- cmd->device->lun);
+ pr_notice("dev %016llx LU %llx is "
+ "recovered\n",
+ SAS_ADDR(task->dev),
+ cmd->device->lun);
sas_eh_finish_cmd(cmd);
sas_scsi_clear_queue_lu(work_q, cmd);
goto Again;
@@ -647,14 +645,14 @@ static void sas_eh_handle_sas_errors(struct Scsi_Host *shost, struct list_head *
/* fallthrough */
case TASK_IS_NOT_AT_LU:
case TASK_ABORT_FAILED:
- SAS_DPRINTK("task 0x%p is not at LU: I_T recover\n",
- task);
+ pr_notice("task 0x%p is not at LU: I_T recover\n",
+ task);
tmf_resp = sas_recover_I_T(task->dev);
if (tmf_resp == TMF_RESP_FUNC_COMPLETE ||
tmf_resp == -ENODEV) {
struct domain_device *dev = task->dev;
- SAS_DPRINTK("I_T %016llx recovered\n",
- SAS_ADDR(task->dev->sas_addr));
+ pr_notice("I_T %016llx recovered\n",
+ SAS_ADDR(task->dev->sas_addr));
sas_eh_finish_cmd(cmd);
sas_scsi_clear_queue_I_T(work_q, dev);
goto Again;
@@ -663,12 +661,12 @@ static void sas_eh_handle_sas_errors(struct Scsi_Host *shost, struct list_head *
try_to_reset_cmd_device(cmd);
if (i->dft->lldd_clear_nexus_port) {
struct asd_sas_port *port = task->dev->port;
- SAS_DPRINTK("clearing nexus for port:%d\n",
- port->id);
+ pr_debug("clearing nexus for port:%d\n",
+ port->id);
res = i->dft->lldd_clear_nexus_port(port);
if (res == TMF_RESP_FUNC_COMPLETE) {
- SAS_DPRINTK("clear nexus port:%d "
- "succeeded\n", port->id);
+ pr_notice("clear nexus port:%d "
+ "succeeded\n", port->id);
sas_eh_finish_cmd(cmd);
sas_scsi_clear_queue_port(work_q,
port);
@@ -676,11 +674,11 @@ static void sas_eh_handle_sas_errors(struct Scsi_Host *shost, struct list_head *
}
}
if (i->dft->lldd_clear_nexus_ha) {
- SAS_DPRINTK("clear nexus ha\n");
+ pr_debug("clear nexus ha\n");
res = i->dft->lldd_clear_nexus_ha(ha);
if (res == TMF_RESP_FUNC_COMPLETE) {
- SAS_DPRINTK("clear nexus ha "
- "succeeded\n");
+ pr_notice("clear nexus ha "
+ "succeeded\n");
sas_eh_finish_cmd(cmd);
goto clear_q;
}
@@ -689,10 +687,10 @@ static void sas_eh_handle_sas_errors(struct Scsi_Host *shost, struct list_head *
* of effort could recover from errors. Quite
* possibly the HA just disappeared.
*/
- SAS_DPRINTK("error from device %llx, LUN %llx "
- "couldn't be recovered in any way\n",
- SAS_ADDR(task->dev->sas_addr),
- cmd->device->lun);
+ pr_err("error from device %llx, LUN %llx "
+ "couldn't be recovered in any way\n",
+ SAS_ADDR(task->dev->sas_addr),
+ cmd->device->lun);
sas_eh_finish_cmd(cmd);
goto clear_q;
@@ -704,7 +702,7 @@ static void sas_eh_handle_sas_errors(struct Scsi_Host *shost, struct list_head *
return;
clear_q:
- SAS_DPRINTK("--- Exit %s -- clear_q\n", __func__);
+ pr_debug("--- Exit %s -- clear_q\n", __func__);
list_for_each_entry_safe(cmd, n, work_q, eh_entry)
sas_eh_finish_cmd(cmd);
goto out;
@@ -758,8 +756,8 @@ void sas_scsi_recover_host(struct Scsi_Host *shost)
list_splice_init(&shost->eh_cmd_q, &eh_work_q);
spin_unlock_irq(shost->host_lock);
- SAS_DPRINTK("Enter %s busy: %d failed: %d\n",
- __func__, scsi_host_busy(shost), shost->host_failed);
+ pr_notice("Enter %s busy: %d failed: %d\n",
+ __func__, scsi_host_busy(shost), shost->host_failed);
/*
* Deal with commands that still have SAS tasks (i.e. they didn't
* complete via the normal sas_task completion mechanism),
@@ -800,9 +798,9 @@ void sas_scsi_recover_host(struct Scsi_Host *shost)
if (retry)
goto retry;
- SAS_DPRINTK("--- Exit %s: busy: %d failed: %d tries: %d\n",
- __func__, scsi_host_busy(shost),
- shost->host_failed, tries);
+ pr_notice("--- Exit %s: busy: %d failed: %d tries: %d\n",
+ __func__, scsi_host_busy(shost),
+ shost->host_failed, tries);
}
int sas_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
@@ -875,9 +873,9 @@ int sas_slave_configure(struct scsi_device *scsi_dev)
if (scsi_dev->tagged_supported) {
scsi_change_queue_depth(scsi_dev, SAS_DEF_QD);
} else {
- SAS_DPRINTK("device %llx, LUN %llx doesn't support "
- "TCQ\n", SAS_ADDR(dev->sas_addr),
- scsi_dev->lun);
+ pr_notice("device %llx, LUN %llx doesn't support "
+ "TCQ\n", SAS_ADDR(dev->sas_addr),
+ scsi_dev->lun);
scsi_change_queue_depth(scsi_dev, 1);
}
--
1.9.1
Powered by blists - more mailing lists