linux-kernel - [PATCH 1/3] ARM: dts: stm32: change CAN RAM mapping on stm32mp157c

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1542271942-28130-2-git-send-email-bich.hemon@st.com>
Date:   Thu, 15 Nov 2018 08:52:29 +0000
From:   Bich HEMON <bich.hemon@...com>
To:     Alexandre TORGUE <alexandre.torgue@...com>,
        "mcoquelin.stm32@...il.com" <mcoquelin.stm32@...il.com>,
        "mark.rutland@....com" <mark.rutland@....com>,
        "robh+dt@...nel.org" <robh+dt@...nel.org>
CC:     "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "linux-stm32@...md-mailman.stormreply.com" 
        <linux-stm32@...md-mailman.stormreply.com>
Subject: [PATCH 1/3] ARM: dts: stm32: change CAN RAM mapping on stm32mp157c

Split the 10Kbytes CAN message RAM to be able to use simultaneously
FDCAN1 and FDCAN2 instances.
First 5Kbytes are allocated to FDCAN1 and last 5Kbytes are used for
FDCAN2. To do so, set the offset to 0x1400 in mram-cfg for FDCAN2.

Signed-off-by: Bich Hemon <bich.hemon@...com>
---
 arch/arm/boot/dts/stm32mp157c.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 8bf1c17..ffd7457 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -684,7 +684,7 @@
 
 		m_can1: can@...0e000 {
 			compatible = "bosch,m_can";
-			reg = <0x4400e000 0x400>, <0x44011000 0x2800>;
+			reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
 			reg-names = "m_can", "message_ram";
 			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -704,7 +704,7 @@
 			interrupt-names = "int0", "int1";
 			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
 			clock-names = "hclk", "cclk";
-			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
 			status = "disabled";
 		};
 
-- 
1.9.1