[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMty3ZAEHiovm6OF6JvJVQR4aqpG1Q3ML5YqxJkF2ntwRkUO=A@mail.gmail.com>
Date: Thu, 15 Nov 2018 23:19:53 +0530
From: Jagan Teki <jagan@...rulasolutions.com>
To: Maxime Ripard <maxime.ripard@...tlin.com>
Cc: Chen-Yu Tsai <wens@...e.org>, Icenowy Zheng <icenowy@...c.io>,
Jernej Skrabec <jernej.skrabec@...l.net>,
Vasily Khoruzhick <anarsoul@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
David Airlie <airlied@...ux.ie>,
dri-devel <dri-devel@...ts.freedesktop.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
linux-clk <linux-clk@...r.kernel.org>,
Michael Trimarchi <michael@...rulasolutions.com>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
devicetree <devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-sunxi@...glegroups.com, linux-amarula@...rulasolutions.com
Subject: Re: [PATCH v4 08/26] drm/sun4i: sun6i_mipi_dsi: Fix VBP size calculation
On Thu, Nov 15, 2018 at 3:26 PM Maxime Ripard <maxime.ripard@...tlin.com> wrote:
>
> Hi,
>
> On Tue, Nov 13, 2018 at 04:46:15PM +0530, Jagan Teki wrote:
> > The horizontal and vertical back porch calculation in BSP
> > code is simply following the Linux drm comment diagram, in
> > include/drm/drm_modes.h which is
> >
> > [hv]back porch = [hv]total - [hv]sync_end
> >
> > BSP code form BPI-M64-bsp is calculating vertical back porch as
> > (from linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c)
> >
> > timmings->ver_sync_time= panel_info->lcd_vspw;
> > timmings->ver_back_porch= panel_info->lcd_vbp-panel_info->lcd_vspw;
> >
> > vbp = panel->lcd_vbp;
> > vspw = panel->lcd_vspw;
> > dsi_dev[sel]->dsi_basic_size0.bits.vbp = vbp-vspw;
> > dsi_dev[sel]->dsi_basic_size0.bits.vbp = panel->lcd_vbp - panel->lcd_vspw;
> > => timmings->ver_back_porch + panel_info->lcd_vspw - panel_info->lcd_vspw
> > => timmings->ver_back_porch
> > => mode->vtotal - mode->end
> >
> > Which evatually same as mode->vtotal - mode->vsync_end so update the
> > same in SUN6I_DSI_BASIC_SIZE0_VBP
> >
> > On the information note, existing SUN6I_DSI_BASIC_SIZE0_VSA is proper
> > value.
> >
> > Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
>
> I've tested your changes on my A33 board, and this commit will break
> it.
>
> It creates vblank timeouts, and visual artifacts at the bottom of the
> display.
Strange, VBP is earlier gives front porch which is anyway wrong.
>
> Later commits seem to fix the issue, but will create some blanking on
> the upper third of the display.
>
> Since the documentation is quite sparse, and a MIPI-DSI analyzer is
> way too expensive, I'd really like to have at least what each of these
> commits are actually fixing, and what symptoms each of these were
> causing, and not just "the BSP does it".
W/o this 2-lane panel is breaking, same vblank timeout and visual
artifacts at the bottom of the panel. though the commits may reference
BSP, I have at-least tested on 3 different panels for us to prove its
working.
>
> Having some datasheet for the panels you had working would help too.
Unfortunately datasheet doesn't have any required information what we
actually looking for.
Powered by blists - more mailing lists