[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1542275044-10970-1-git-send-email-wesley.sheng@microchip.com>
Date: Thu, 15 Nov 2018 17:43:59 +0800
From: Wesley Sheng <wesley.sheng@...rochip.com>
To: <kurt.schwemmer@...rosemi.com>, <logang@...tatee.com>,
<bhelgaas@...gle.com>, <linux-pci@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <wesleyshenggit@...a.com>, <wesley.sheng@...rochip.com>
Subject: [PATCH 0/5] Switchtec MRPC DMA mode support
Hi, Everyone,
This patch series adds support for the Switchtec MRPC DMA mode.
Switchtec switches supports 2 MRPC interaction modes: MRPC normal mode and
MRPC DMA mode, a new feature in the latest firmware versions. MRPC normal
mode requires the host to read the MRPC command status and output data.
In MRPC DMA mode the command status and output data are pushed directly to
host memory and issues an interrupt upon completion. The advantage of MRPC
DMA mode is avoiding potential high latency response from the Memory Read
TLP.
Additionally, we've made the following changes:
* Improve the efficiency of filling MRPC Input buffer by enabling write
combining on MRPC region of BAR
* Software workaround for delay responded Memory READ TLPs that access
the BAR
* And several bug fixes
Regards,
Wesley
Boris Glimcher (1):
switchtec: Set DMA coherent mask in Switchtec driver
Joey Zhang (1):
switchtec: A temporary variable should be used for the flags of
switchtec_ioctl_event_ctl
Kelvin Cao (2):
switchtec: Remove immediate status check after submit a MRPC command
switchtec: Improve MRPC efficiency by leveraging write combining
Wesley Sheng (1):
switchtec: MRPC DMA mode implementation
drivers/pci/switch/switchtec.c | 154 ++++++++++++++++++++++++++++++++++++-----
include/linux/switchtec.h | 16 +++++
2 files changed, 153 insertions(+), 17 deletions(-)
--
2.7.4
Powered by blists - more mailing lists