| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20181115224657.14736-2-martin.blumenstingl@googlemail.com>
Date: Thu, 15 Nov 2018 23:46:56 +0100
From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To: linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org,
tglx@...utronix.de, daniel.lezcano@...aro.org
Cc: linux-arm-kernel@...ts.infradead.org,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: [PATCH v2 1/2] clocksource: meson6_timer: use register names from the datasheet
This makes the driver use the names from S805 datasheet for the
preprocessor #defines. This makes it easier to spot that the driver
currently only supports Timer A (as clockevent with interrupt support)
and Timer E (as clocksource without interrupts). Timer B, C and D (which
are similar to Timer A) are currently not supported by the driver.
While here, this also removes the internal "CED_ID" and "CSD_ID" defines
which are used to identify the timer. These IDs are not described in the
datasheet and thus make it harder to compare the code to what's written
in the datasheet.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
---
drivers/clocksource/meson6_timer.c | 108 +++++++++++++++++------------
1 file changed, 64 insertions(+), 44 deletions(-)
diff --git a/drivers/clocksource/meson6_timer.c b/drivers/clocksource/meson6_timer.c
index 92f20991a937..23c7638e2bb3 100644
--- a/drivers/clocksource/meson6_timer.c
+++ b/drivers/clocksource/meson6_timer.c
@@ -10,6 +10,8 @@
* warranty of any kind, whether express or implied.
*/
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
@@ -20,80 +22,96 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#define CED_ID 0
-#define CSD_ID 4
-
-#define TIMER_ISA_MUX 0
-#define TIMER_ISA_VAL(t) (((t) + 1) << 2)
-
-#define TIMER_INPUT_BIT(t) (2 * (t))
-#define TIMER_ENABLE_BIT(t) (16 + (t))
-#define TIMER_PERIODIC_BIT(t) (12 + (t))
-
-#define TIMER_CED_INPUT_MASK (3UL << TIMER_INPUT_BIT(CED_ID))
-#define TIMER_CSD_INPUT_MASK (7UL << TIMER_INPUT_BIT(CSD_ID))
-
-#define TIMER_CED_UNIT_1US 0
-#define TIMER_CSD_UNIT_1US 1
+#define MESON_ISA_TIMER_MUX 0x00
+#define MESON_ISA_TIMER_MUX_TIMERD_EN BIT(19)
+#define MESON_ISA_TIMER_MUX_TIMERC_EN BIT(18)
+#define MESON_ISA_TIMER_MUX_TIMERB_EN BIT(17)
+#define MESON_ISA_TIMER_MUX_TIMERA_EN BIT(16)
+#define MESON_ISA_TIMER_MUX_TIMERD_MODE BIT(15)
+#define MESON_ISA_TIMER_MUX_TIMERC_MODE BIT(14)
+#define MESON_ISA_TIMER_MUX_TIMERB_MODE BIT(13)
+#define MESON_ISA_TIMER_MUX_TIMERA_MODE BIT(12)
+#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_MASK GENMASK(10, 8)
+#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_SYSTEM_CLOCK 0x0
+#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_1US 0x1
+#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_10US 0x2
+#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_100US 0x3
+#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_1MS 0x4
+#define MESON_ISA_TIMER_MUX_TIMERD_INPUT_CLOCK_MASK GENMASK(7, 6)
+#define MESON_ISA_TIMER_MUX_TIMERC_INPUT_CLOCK_MASK GENMASK(5, 4)
+#define MESON_ISA_TIMER_MUX_TIMERB_INPUT_CLOCK_MASK GENMASK(3, 2)
+#define MESON_ISA_TIMER_MUX_TIMERA_INPUT_CLOCK_MASK GENMASK(1, 0)
+#define MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_1US 0x0
+#define MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_10US 0x1
+#define MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_100US 0x0
+#define MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_1MS 0x3
+
+#define MESON_ISA_TIMERA 0x04
+#define MESON_ISA_TIMERB 0x08
+#define MESON_ISA_TIMERC 0x0c
+#define MESON_ISA_TIMERD 0x10
+#define MESON_ISA_TIMERE 0x14
static void __iomem *timer_base;
static u64 notrace meson6_timer_sched_read(void)
{
- return (u64)readl(timer_base + TIMER_ISA_VAL(CSD_ID));
+ return (u64)readl(timer_base + MESON_ISA_TIMERE);
}
-static void meson6_clkevt_time_stop(unsigned char timer)
+static void meson6_clkevt_time_stop(void)
{
- u32 val = readl(timer_base + TIMER_ISA_MUX);
+ u32 val = readl(timer_base + MESON_ISA_TIMER_MUX);
- writel(val & ~TIMER_ENABLE_BIT(timer), timer_base + TIMER_ISA_MUX);
+ writel(val & ~MESON_ISA_TIMER_MUX_TIMERA_EN,
+ timer_base + MESON_ISA_TIMER_MUX);
}
-static void meson6_clkevt_time_setup(unsigned char timer, unsigned long delay)
+static void meson6_clkevt_time_setup(unsigned long delay)
{
- writel(delay, timer_base + TIMER_ISA_VAL(timer));
+ writel(delay, timer_base + MESON_ISA_TIMERA);
}
-static void meson6_clkevt_time_start(unsigned char timer, bool periodic)
+static void meson6_clkevt_time_start(bool periodic)
{
- u32 val = readl(timer_base + TIMER_ISA_MUX);
+ u32 val = readl(timer_base + MESON_ISA_TIMER_MUX);
if (periodic)
- val |= TIMER_PERIODIC_BIT(timer);
+ val |= MESON_ISA_TIMER_MUX_TIMERA_MODE;
else
- val &= ~TIMER_PERIODIC_BIT(timer);
+ val &= ~MESON_ISA_TIMER_MUX_TIMERA_MODE;
- writel(val | TIMER_ENABLE_BIT(timer), timer_base + TIMER_ISA_MUX);
+ writel(val | MESON_ISA_TIMER_MUX_TIMERA_EN,
+ timer_base + MESON_ISA_TIMER_MUX);
}
static int meson6_shutdown(struct clock_event_device *evt)
{
- meson6_clkevt_time_stop(CED_ID);
+ meson6_clkevt_time_stop();
return 0;
}
static int meson6_set_oneshot(struct clock_event_device *evt)
{
- meson6_clkevt_time_stop(CED_ID);
- meson6_clkevt_time_start(CED_ID, false);
+ meson6_clkevt_time_stop();
+ meson6_clkevt_time_start(false);
return 0;
}
static int meson6_set_periodic(struct clock_event_device *evt)
{
- meson6_clkevt_time_stop(CED_ID);
- meson6_clkevt_time_setup(CED_ID, USEC_PER_SEC / HZ - 1);
- meson6_clkevt_time_start(CED_ID, true);
+ meson6_clkevt_time_stop();
+ meson6_clkevt_time_setup(USEC_PER_SEC / HZ - 1);
+ meson6_clkevt_time_start(true);
return 0;
}
static int meson6_clkevt_next_event(unsigned long evt,
struct clock_event_device *unused)
{
- meson6_clkevt_time_stop(CED_ID);
- meson6_clkevt_time_setup(CED_ID, evt);
- meson6_clkevt_time_start(CED_ID, false);
+ meson6_clkevt_time_stop();
+ meson6_clkevt_time_setup(evt);
+ meson6_clkevt_time_start(false);
return 0;
}
@@ -144,22 +162,24 @@ static int __init meson6_timer_init(struct device_node *node)
}
/* Set 1us for timer E */
- val = readl(timer_base + TIMER_ISA_MUX);
- val &= ~TIMER_CSD_INPUT_MASK;
- val |= TIMER_CSD_UNIT_1US << TIMER_INPUT_BIT(CSD_ID);
- writel(val, timer_base + TIMER_ISA_MUX);
+ val = readl(timer_base + MESON_ISA_TIMER_MUX);
+ val &= ~MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_MASK;
+ val |= FIELD_PREP(MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_MASK,
+ MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_1US);
+ writel(val, timer_base + MESON_ISA_TIMER_MUX);
sched_clock_register(meson6_timer_sched_read, 32, USEC_PER_SEC);
- clocksource_mmio_init(timer_base + TIMER_ISA_VAL(CSD_ID), node->name,
+ clocksource_mmio_init(timer_base + MESON_ISA_TIMERE, node->name,
1000 * 1000, 300, 32, clocksource_mmio_readl_up);
/* Timer A base 1us */
- val &= ~TIMER_CED_INPUT_MASK;
- val |= TIMER_CED_UNIT_1US << TIMER_INPUT_BIT(CED_ID);
- writel(val, timer_base + TIMER_ISA_MUX);
+ val &= ~MESON_ISA_TIMER_MUX_TIMERA_INPUT_CLOCK_MASK;
+ val |= FIELD_PREP(MESON_ISA_TIMER_MUX_TIMERA_INPUT_CLOCK_MASK,
+ MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_1US);
+ writel(val, timer_base + MESON_ISA_TIMER_MUX);
/* Stop the timer A */
- meson6_clkevt_time_stop(CED_ID);
+ meson6_clkevt_time_stop();
ret = setup_irq(irq, &meson6_timer_irq);
if (ret) {
--
2.19.1
Powered by blists - more mailing lists