linux-kernel - Re: [PATCH v2 3/5] phy: ocelot-serdes: convert to use eth phy mode and submode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1470a95d-7923-737f-6fcd-80e97a5c05f9@ti.com>
Date:   Fri, 16 Nov 2018 15:00:37 -0600
From:   Grygorii Strashko <grygorii.strashko@...com>
To:     Quentin Schulz <quentin.schulz@...tlin.com>
CC:     "David S. Miller" <davem@...emloft.net>,
        Kishon Vijay Abraham I <kishon@...com>,
        Russell King - ARM Linux <linux@...linux.org.uk>,
        <netdev@...r.kernel.org>, Sekhar Nori <nsekhar@...com>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        Tony Lindgren <tony@...mide.com>,
        <linux-amlogic@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Antoine Tenart <antoine.tenart@...e-electrons.com>,
        Vivek Gautam <vivek.gautam@...eaurora.org>,
        Maxime Ripard <maxime.ripard@...tlin.com>,
        Chen-Yu Tsai <wens@...e.org>, Carlo Caione <carlo@...one.org>,
        Chunfeng Yun <chunfeng.yun@...iatek.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Manu Gautam <mgautam@...eaurora.org>
Subject: Re: [PATCH v2 3/5] phy: ocelot-serdes: convert to use eth phy mode
 and submode



On 11/16/18 5:15 AM, Quentin Schulz wrote:
> Hi Grygorii,
> 
> On Fri, Nov 09, 2018 at 05:47:53PM -0600, Grygorii Strashko wrote:
>> Convert ocelot-serdes PHY driver to use recently introduced
>> PHY_MODE_ETHERNET and phy_set_mode_ext().
>>
> 
> Thanks for the patch, it's annoying to have to map PHY_MODE_SGMII and
> PHY_INTERFACE_MODE_SGMII :)
> 
>> Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
>> ---
>>   drivers/net/ethernet/mscc/ocelot.c   |  9 ++-------
>>   drivers/phy/mscc/phy-ocelot-serdes.c | 14 ++++++++++----
>>   2 files changed, 12 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
>> index 3238b9e..3edb608 100644
>> --- a/drivers/net/ethernet/mscc/ocelot.c
>> +++ b/drivers/net/ethernet/mscc/ocelot.c
>> @@ -472,7 +472,6 @@ static int ocelot_port_open(struct net_device *dev)
>>   {
>>   	struct ocelot_port *port = netdev_priv(dev);
>>   	struct ocelot *ocelot = port->ocelot;
>> -	enum phy_mode phy_mode;
>>   	int err;
>>   
>>   	/* Enable receiving frames on the port, and activate auto-learning of
>> @@ -484,12 +483,8 @@ static int ocelot_port_open(struct net_device *dev)
>>   			 ANA_PORT_PORT_CFG, port->chip_port);
>>   
>>   	if (port->serdes) {
>> -		if (port->phy_mode == PHY_INTERFACE_MODE_SGMII)
>> -			phy_mode = PHY_MODE_SGMII;
>> -		else
>> -			phy_mode = PHY_MODE_QSGMII;
>> -
>> -		err = phy_set_mode(port->serdes, phy_mode);
>> +		err = phy_set_mode_ext(port->serdes, PHY_MODE_ETHERNET,
>> +				       port->phy_mode);
>>   		if (err) {
>>   			netdev_err(dev, "Could not set mode of SerDes\n");
>>   			return err;
>> diff --git a/drivers/phy/mscc/phy-ocelot-serdes.c b/drivers/phy/mscc/phy-ocelot-serdes.c
>> index c61a9890..f525a21 100644
>> --- a/drivers/phy/mscc/phy-ocelot-serdes.c
>> +++ b/drivers/phy/mscc/phy-ocelot-serdes.c
>> @@ -11,6 +11,7 @@
>>   #include <linux/module.h>
>>   #include <linux/of.h>
>>   #include <linux/of_platform.h>
>> +#include <linux/phy.h>
>>   #include <linux/phy/phy.h>
>>   #include <linux/platform_device.h>
>>   #include <linux/regmap.h>
>> @@ -116,8 +117,10 @@ struct serdes_mux {
>>   	.mux = _mux,						\
>>   }
>>   
>> -#define SERDES_MUX_SGMII(i, p, m, c) SERDES_MUX(i, p, PHY_MODE_SGMII, m, c)
>> -#define SERDES_MUX_QSGMII(i, p, m, c) SERDES_MUX(i, p, PHY_MODE_QSGMII, m, c)
>> +#define SERDES_MUX_SGMII(i, p, m, c) \
>> +	SERDES_MUX(i, p, PHY_INTERFACE_MODE_SGMII, m, c)
>> +#define SERDES_MUX_QSGMII(i, p, m, c) \
>> +	SERDES_MUX(i, p, PHY_INTERFACE_MODE_QSGMII, m, c)
>>   
>>   static const struct serdes_mux ocelot_serdes_muxes[] = {
>>   	SERDES_MUX_SGMII(SERDES1G(0), 0, 0, 0),
>> @@ -164,12 +167,15 @@ static int serdes_set_mode(struct phy *phy, enum phy_mode mode, int submode)
>>   	unsigned int i;
>>   	int ret;
>>   
>> +	if (mode != PHY_MODE_ETHERNET)
>> +		return -EINVAL;
>> +
> 
> This works for now because we only support Ethernet muxes for now but
> this IP also supports PHY_MODE_PCIE.
> 
> It seems weird to me that the day we'll add support for PCIE muxing we
> will have in ocelot_serdes_muxes[i].mode either a PHY_INTERFACE_MODE_*
> or a PHY_MODE_PCIE. This is not an issue for now since you do the mode
> != PHY_MODE_ETHERNET just above but once we get rid of this, we only
> test for submode != ocelot_serdes_muxes[i].mode and both
> PHY_INTERFACE_MODE_1000BASEX and PHY_MODE_PCIE will have the same index
> thus might be confused.
> 
> Should we add a submode to the SERDES_MUX macro, move PHY_MODE_*MII to
> this submode and have PHY_MODE_ETHERNET/PCIE in the mode field?

Yeh. You are right. I'll update it this way.
I have no hw, so hope you will be able to help with review/testing.


-- 
regards,
-grygorii