[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181117130337.5856-1-tom@aussec.com>
Date: Sun, 18 Nov 2018 00:03:33 +1100
From: Tom Burkart <tom@...sec.com>
To: Linux kernel mailing list <linux-kernel@...r.kernel.org>
Cc: Tom Burkart <tom@...sec.com>
Subject: [PATCH v8 0/4] PPS: pps-gpio PPS ECHO implementation
Hi all,
please find attached the PPS-GPIO PPS ECHO implementation patch. The
driver claims to have echo functionality in the sysfs interface but this
functionality is not present. This patch provides this functionality.
Parts 1 and 2 of the patch change the original driver from the number
based GPIO ABI to the descriptor based ABI.
Parts 3 and 4 then add the PPS ECHO functionality. This is enabled if a
"echo-gpios" entry is found in the devicetree.
Changes in v8:
Changes requested by Rob Herring and Philipp Zabel:
DT explanation and don't change the DT entry for the PPS gpio.
On the linuxpps mailing list it was suggested to use a hrtimer for
resetting the GPIO ECHO active state to the inactive state.
Please also comment on whether a hrtimer is necessary/desirable for the
purpose of resetting the echo pin active state. I am happy to implement
it if there is a need.
Please install, test and comment as it is now a quite major change to
the driver.
Please do send suggestions for improvement.
Tom Burkart
Tom Burkart (4):
dt-bindings: pps: capture-clear addition
pps: descriptor-based gpio, capture-clear addition
dt-bindings: pps: pps-gpio PPS ECHO implementation
pps: pps-gpio pps-echo implementation
Documentation/devicetree/bindings/pps/pps-gpio.txt | 11 ++
drivers/pps/clients/pps-gpio.c | 180 ++++++++++++++++-----
include/linux/pps-gpio.h | 6 +-
3 files changed, 153 insertions(+), 44 deletions(-)
--
2.12.3
Powered by blists - more mailing lists