[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20181117161031.tedf2hvkhwd4f2kd@kahuna>
Date: Sat, 17 Nov 2018 10:10:31 -0600
From: Nishanth Menon <nm@...com>
To: Vignesh R <vigneshr@...com>
CC: Tero Kristo <t-kristo@...com>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-omap@...r.kernel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Tony Lindgren <tony@...mide.com>
Subject: Re: [PATCH v2 0/4] AM654: Add pinmux support
On 11:31-20181113, Vignesh R wrote:
> Add pinmux definitions and pinctrl regions for AM654 SoCs
> and enable uart and i2c.
>
> v2:
> Add only minimum needed macros in dt-bindings include file
> New patches to illustrate pinmux using uart and i2c
>
>
> Tero Kristo (1):
> arm64: dts: ti: k3-am65: Add pinctrl regions
>
> Vignesh R (3):
> dt-bindings: pinctrl: k3: Introduce pinmux definitions
> arm64: dts: ti: am654-base-board: Add pinmux for main uart0
> arm64: dts: ti: k3-am654-base-board: Add I2C nodes
>
> MAINTAINERS | 1 +
> arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 60 +++++++++++++
> arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 11 +++
> arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 19 ++++
> arch/arm64/boot/dts/ti/k3-am65.dtsi | 7 ++
> .../arm64/boot/dts/ti/k3-am654-base-board.dts | 86 +++++++++++++++++++
> include/dt-bindings/pinctrl/k3.h | 35 ++++++++
> 7 files changed, 219 insertions(+)
> create mode 100644 include/dt-bindings/pinctrl/k3.h
The last patch was a bit sneaky ;)... but there is nothing controversial
in it..
Series: Acked-by: Nishanth Menon <nm@...com>
--
Regards,
Nishanth Menon
Powered by blists - more mailing lists