linux-kernel - [PATCH 4/7] net: phy: icplus: use the BIT macro where possible

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181117182007.14791-5-martin.blumenstingl@googlemail.com>
Date:   Sat, 17 Nov 2018 19:20:04 +0100
From:   Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To:     netdev@...r.kernel.org, devicetree@...r.kernel.org,
        f.fainelli@...il.com, andrew@...n.ch, mark.rutland@....com,
        robh+dt@...nel.org, davem@...emloft.net
Cc:     linux-kernel@...r.kernel.org,
        Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: [PATCH 4/7] net: phy: icplus: use the BIT macro where possible

This makes the code consistent by using the BIT() macro instead of
manual bit-shifting for some of the fields. No functional changes.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
---
 drivers/net/phy/icplus.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index 3d3e9134c762..3ec470adde3d 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -36,11 +36,11 @@ MODULE_LICENSE("GPL");
 
 /* IP101A/G - IP1001 */
 #define IP10XX_SPEC_CTRL_STATUS		16	/* Spec. Control Register */
-#define IP1001_RXPHASE_SEL		(1<<0)	/* Add delay on RX_CLK */
-#define IP1001_TXPHASE_SEL		(1<<1)	/* Add delay on TX_CLK */
+#define IP1001_RXPHASE_SEL		BIT(0)	/* Add delay on RX_CLK */
+#define IP1001_TXPHASE_SEL		BIT(1)	/* Add delay on TX_CLK */
 #define IP1001_SPEC_CTRL_STATUS_2	20	/* IP1001 Spec. Control Reg 2 */
 #define IP1001_APS_ON			11	/* IP1001 APS Mode  bit */
-#define IP101A_G_APS_ON			2	/* IP101A/G APS Mode bit */
+#define IP101A_G_APS_ON			BIT(1)	/* IP101A/G APS Mode bit */
 #define IP101A_G_IRQ_CONF_STATUS	0x11	/* Conf Info IRQ & Status Reg */
 #define	IP101A_G_IRQ_PIN_USED		BIT(15) /* INTR pin used */
 #define	IP101A_G_NO_IRQ			BIT(11) /* IRQ's inactive */
-- 
2.19.1