linux-kernel - Re: [PATCH 2/7] dt-bindings: net: phy: add bindings for the IC Plus Corp. IP101A/G PHYs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAFBinCCHp_gqmh4zXQLb2FDJrgzBEqoFZ+BrcWH0UcoOrwN+3A@mail.gmail.com>
Date:   Sun, 18 Nov 2018 18:29:21 +0100
From:   Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To:     andrew@...n.ch
Cc:     netdev@...r.kernel.org, devicetree@...r.kernel.org,
        f.fainelli@...il.com, mark.rutland@....com, robh+dt@...nel.org,
        davem@...emloft.net, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/7] dt-bindings: net: phy: add bindings for the IC Plus
 Corp. IP101A/G PHYs

Hi Andrew,

On Sun, Nov 18, 2018 at 6:03 PM Andrew Lunn <andrew@...n.ch> wrote:
>
> On Sat, Nov 17, 2018 at 07:20:02PM +0100, Martin Blumenstingl wrote:
> > The IP101A and IP101G series both have various models. Depending on the
> > board implementation we need a special property for the IP101GR (32-pin
> > LQFP package) PHY:
> > pin 21 ("RXER/INTR_32") outputs the "receive error" signal by default
> > (LOW means "normal operation", HIGH means that there's either a decoding
> > error of the received signal or that the PHY is receiving LPI). This pin
> > can also be switched to INTR32 mode, where the interrupt signal is
> > routed to this pin. The other PHYs don't need this special handling
> > because they have more pins available so the interrupt function gets a
> > dedicated pin.
> >
> > This adds two properties to either select the "receive error" or
> > "interrupt" function of pin 21. Not specifying any function means that
> > the default set by the bootloader is used. This is required because the
> > IP101GR cannot be differentiated between other IP101 PHYs as the PHY
> > identification registers on all of these is 0x02430c54.
>
> Hi Martin
>
> Not being able to identify the device is a real problem here.
indeed, even some extra "custom version" register would have helped

> I did wonder about adding a property which tells you if this is the R
> variant, but the binding you suggests seems equally good.
I decided against that because I *believe* (I have no evidence though)
that the IP101G could have the same problem in theory.
according to the datasheet I have the IP101G is a "Dice" (which I'm
interpreting as "raw die, no package")
<some company> could make a multi-chip package with the IP101G and
only route the RXER/INTR_32 to the outside
due to lack of evidence I decided not to document this in the
dt-bindings themselves, but if you want I can add this theory to the
patch description

apart from that: thank you for reviewing this series!


Regards
Martin